Epson Edge Print - A Detailed Dive Through The Software
HTML-код
- Опубликовано: 26 авг 2024
- Mike Moon from EPSON takes you step by step through the EPSON Edge Print software.
Any questions regarding the EPSON Dye-Sub or Large Format Solutions? Call 1-800-771-9665 and ask to talk to one of our commercial sales specialists or visit our website www.itsupplies...
Hello, I have an Epson F-9430 and then by new one Epson F-11030, two model printer we are using Epson Edge Print. When i have the same file printed on F-9430 and F-11030 the result is quite different, i know about that machine has different technology, different ink, different print head, etc. So in this video you explain about Output Color Setting - tone curve edit (12:24), i think that can make fine adjustment and apply to the new machine, so that the result is close to the old machine, but you explain not complete how to save and apply to job and effected. Thank you.
Thank you so much for this webinar ! I've been waiting for it for so long !!
How do you print color profiles. My images I bring in once printed in edge prints a different color?
Hello Michelle, color profiles are associated with the media type and the pass mode. Using the same pass mode and media should give similar results assuming that the printer has been maintained and the nozzles are clear.
How do I add more than one design. I know how to do the same designs(like 6 of the same on the same printed sheet) but when I upload another picture, it replaces the other picture
Hi Robin,
Thank you for your question! Like you said, you can add multiple images but they replace each other when you click between them because they are separate jobs by default. To combine multiple images into the same print job, you will need to select the jobs along the left side of the software (you can select multiple by holding down the shift or control key), and once highlighted, choose the "Nest" option at the top. This will combine all of your prints into one job, and you can still make edits to them each individually to lay them out where you like. Hope this helps!
Everything is greyed out. Cant add, nest, or anything. What did i do wrong?
Hi @svjohnson5, you may be on a layer instead of the primary image file. Please make sure that you are on the master image and then the information will show up.
is there a way to automate nesting before the printing or RIP process? can the software create contour lines for irregular shapes? rather than just bounding box?
Hi lindsay,
Thank you for your question! Currently there is not a way to automate nesting within Epson Edge Print, but nesting can be done manually. The software cannot create contour lines, that is something that must be done to the image ahead of time in a photo editing software like Adobe Illustrator, Photoshop, or CorelDRAW. The software will still give a bounding box, but with a PNG or PDF file with a transparent background, for example, this will lay the bounding box much closer to the image itself.
is this software consume less ink in epson sure color P7530 than direct print???
Guys! I have a problem on the registration of my f570 printer… When I started the registration it doesn’t shows me my printer and looking throughs IP address did not work either… what can I do?
Hello, thank you for your comment. Please give us a call at 1-800-771-9665 for some assistance!
Hi. How can download this software?
You can download here for a 30 days trial support.epson.net/eep/ - currently, it cannot be purchased separate of a printer in the US.
Hi, is there a way where can I find the accounting tool to see the ink needed for print file? I have trouble estimating the ink 😅😅
Hello @annashari4525, thanks for your comment. Epson Edgeprint has a cost estimator built in for a number of printers. Go to the job info tab and click on the "confirm" button at the bottom. That will pop up an ink estimation tool.
It would be great if the ink consumption calculator could have been added. Or is there any way we could check the ink consumption details
Hi himanshuparekh23, there is a way to get aggregated data through the data export agent. This can be set by the hour or the day.
Ha alguien le pasa que cuando instala Edge Print no reconoce la impresora?
alguien me ayuda!
Lo principal es asegurarse de que está en la misma red y que se puede acceder a la dirección IP desde la computadora. La forma más fácil de saberlo es escribir la dirección IP de la impresora en su navegador. Llame a nuestro equipo de soporte técnico si tiene preguntas adicionales. 1-800-771-9665
Hi. I have a f6200 but thinking in buyin a f6370 soon. I'm watching this video to learn more about this software... Now, i have an question: in The Edge Print can I set the colors separetely for every ICC profile? For example, now i have an profile, i use it, but for some reason someday in the future i realize that it would be better if i elevate the quantitie of the yelow. Can i do it as I do now in Wasatch ou I have to make a total new ICC profile with espectrofotomenter... (?).
Hi Raphael, thank you for the question. If I'm understanding correctly, it sounds like you're going into the ICC profile itself within Wasatch and adjusting the Ink Density of the CMYK colors? If that is the case, you do not have the same control over the ICC profiles within Epson Edge Print. Instead, you are able to make adjustments to Named Colors (Pantone, Spot Colors, etc.) set within an image itself. For example, if you decide the yellow you printed needs to be made lighter, you can go into the Color Replacements, select the yellow color you're looking to change, and you can change the percentage of yellow for that particular color or change it to another color entirely. This is not a perfect process, however. We would recommend making any major image changes through a dedicated image editing software and importing the changed file into your RIP to ensure greater accuracy. I hope this answers your question!
Nice video. You know where is the tool to know the cost of the printing work ??? Something like that ... I have EPSON f6370
Interested on this tool also
Hey @Tiger, currently Epson does not have a cost estimator available for Edge Print just yet. We're hoping it comes in one of the updates soon. If you want to know the cost of your prints once they are completed, you can download the LFP Accounting Tool from Epson's website. You will just need to input the cost of your inks and media to get an accurate report.
Hi IT Supplies! I have an issue when I try to import a job that is over 5 meters long (like 7 meters) it will cut off the parts (2 meters). It seems that the output size has some sort of limit. How can I fix this? Also I'm using a Epson sc-f9400h.
Hi @Wolfran18, we believe there was a restriction at one time. It's our understanding that the latest version of the software corrects this.
So informative. Thank u so much
Thank you, Mealy Robinson, we're glad you enjoyed our content!
I have an Epson SC-F501 printer (two fluorescent yellow and pink) which are the best settings in the Edge Print program. Black is not intense enough, gray goes green? Please advice what would be optimal. Thanks for the reply.
Hi Siviljstvo, the SC-f501 Printer has not been release to dealers / customers in the states as of right now. Without testing it, we wouldn't be able to give you a helpful response.
Hi dear my edge print is no going to register which is give a message to me that is say your edge print is using other computer which is not true plz help me
Hi there, thank you for your comment. It sounds like there is a reason or two this could be happening: this could just be a technical glitch in which case, you would need to call Epson Support (562) 276-1305. Or if you purchased the printer as a demo model or used, that seller may have the software registered to their computer still. In that case, you would need to contact the seller and ask them to unregister the unit from their computer so you can register it to yours. Hope this helps!
Just started using this software. Colors arent printing sublimation accurate. Reds print like ruby red grapefruit.
Please make sure to run a nozzle check to ensure that the heads are performing correctly. There are a lot of variables in Dye Sublimation. You may want to to test other papers as well. Our best paper is the SubliPro Vivid. www.itsupplies.com/sublipro
Currently using the epson paper you guys sell. Nozzle checks are great. Im thinking its settings im using but cant find any good settings anywhere online.
@@tshirtclout5188 Have you referred to the User Guide for Edge Print? Page 41 highlights different color settings. download.epson-europe.com/pub/download/6286/epson628617eu.pdf
Thanks for the video. I send job to print and then it stops at 90%. Can't figure out why
Hi Dee, a couple of things could be happening. Can you try sending a different image to print to see if you just have a corrupt file? You can also try restarting your computer and the printer (I know that seems too easy but sometimes that works too) and unplug every thing (printer from outlet and computer and internet depending on how you are connected). How are you connected to the printer? Printer cable cord or network? If Printer cable cord - you may need to replace that cord. Try those things and if that doesn't work, call into our call center an speak with our technical support staff 1-847-394-9573.
@@ITSuppliesINC I tried your suggestions and it did not work. It goes to 90% in the print que and then it stops. I am not using a printer cord.. The number you indicated above is not in service.
Hi Dee, feel free to email us at info@itsupplies or you can call 1-800-771-9665. We'd love to get this figured out for you!
How change output color from cmyk to rgb ?
Hi @aa_dnr, any output profiles you are using in Edge Print for the EPSON F170 are RGB Profiles. You might be referring to the Tone Curve which cannot be changed to RGB. The technology is allowing you to adjust the use of the CMYK inks. In Color Replacement, you may also be referring to the Output Color that specifies CMYK. We're not sure why they give you a dropdown option because this printer must convert your images into the CMYK ink channels of the printer. If you need to change RGB values, you must do that in the file itself.
Is epson going to make this available to F570 user?
Nope, they are not! Unless you are one of the lucky ones who received the Edge RIP in the box (by mistake or what, idk) you won't be getting it!
I received it with my f570
@@mimi121880able You got lucky. :) Some people get the Edge RIP, some do not, and Epson refuses to explain why. Thanks, Epson!
I got mine!
I received the software with my F570.
why this software can't run on epson surecolor 30610?.
Hi Adam, thank you for your comment. This Rip Software is new to the market still and Epson only made it available for specific printer models. Unfortunately, we don't know why they made that decision.
Has anyone had any success using Edge Print on Windows Parallels?
Hello, we have not attempted this. Unfortunately this software is not supported when using parallels.
Que tal, oye cómo descargo ese programa que usas
Hola William,
no todas las impresoras epson son compatibles con Epson Edge Print. La mejor manera de verificar esto es ir a la página de descarga de EPSON para su modelo de impresora. Si es compatible, debe aparecer en la lista de software. epson.com/Support/Printers/sh/s1
HI,
Can a "tiled Job" be printed as individual files.
In the latest version of Edge, 4.0.0, and it doesn't look like you can run the tiles as individual jobs using the tools in Edge. If you want to run the tiles as separate jobs, you would need to create the tiles outside of Edge and import them each separately.
Can you add names or letters on this ?.
Hello, thanks for your comment. We're not sure what you are referring to. Can you please expand on this or give us a call. Thanks. 1-800-771-9665.
can i use multi images for printing
Hi Tahir, thank you for your comment. If you are asking if you can print multiple images at once then the answer is yes. Let us know if there are any other questions we can answer.
How do you merge picture in
Hi Lacy, If you're talking about printing multiple images at the same time, simply open the files in EdgePrint and drag one file over the next. This will activate the nesting function.
What about the double layer color >>>white
Hi GLMN printing,
So sorry we missed your comment! I believe you are referring to sandwich mode. Edge Print does not currently support this. One way to do this is to print an overflood and then print color again on a second pass.
@@ITSuppliesINC can i know how to do this?
@@parkjemeng5862 Hi Park, what exactly are you wanting to learn how to do?
is it me or is this software insanely slow? Adding even one job can take 20 plus minutes. It doesnt matter how big or small, the import takes an infuriating amount of time. Defeats the whole productivity aspect when my heat press reaches temperature well before the software even finishes adding the job.
Hi F C, we're sorry to hear this! If you don't already, make sure to check your history on a daily basis and clear all jobs.
Wouldn't it be nice if Epson shipped the Edge RIP with the Epson F570? But nope, they don't. And get this, they will not even sell it to me, despite it being an F-Series printer that is supported. How do I know Edge supports it? Because some people did receive the RIP even though they shouldn't have and because it still ships in some other countries. The Edge RIP is available for download on the Epson support site for the F570! Go figure. Thanks, Epson, for nothing!
This isnt true as mine came with it.
@@joelallen770 I said "some people did receive the RIP" so what part isn't true?
It came in a DVD inside the box for me. Really some didn't get it? That absolutely sucks.
I actually have mine and license in a dvd
Anyone else having printed jobs taking a long time to load?
Hello, you may have a lot of stored jobs in your history tab. This will affect how much memory is available. It is best to clear those on a daily or weekly basis.
Any way to be able to store those jobs elsewhere instead of deleting them? Even with a lot of memory in computer it does that? Helps to keep track of how many jobs have been run.@@ITSuppliesINC
This software is pretty trash i need info on how to resize images with out warping them
Hi @cappa318, please refer to 7:14 in the video. Here you can see how clicking on the link button to the left of the sizing area will keep your ratios the same.