I just got into building these small engines. After building 1000’s of V8’s. And when I need to know what has to be done. Paul is the man. It’s fun porting and building these small engines. You can build one and test fast and turn around pull it apart make changes and see how it works. Your the man Paul
@@paulskartslifan4206 Is it possible to make a top fuel predator/ single cylinder engine? Enough nitro borderlining hydrolock, and enough energy into the spark plug its like a arc welder. The spark plug would only last 5 seconds max, but the power is unheard of, how would one put that much amperage in these spark plugs?
should slightly round off / blend those sharp edges to the quench pad. air speeds get a little too high right there right before TDC. Got some other tips if you want to hear them, dont wanna look like a dickhead know-it-all here.
![Clave Especial x Fuerza Regida - No Pasa Nada [Official Video]](http://i.ytimg.com/vi/3u2jaju71IQ/mqdefault.jpg)
I just got into building these small engines. After building 1000’s of V8’s. And when I need to know what has to be done. Paul is the man. It’s fun porting and building these small engines. You can build one and test fast and turn around pull it apart make changes and see how it works. Your the man Paul
LOVE your stuff!
You build the best stuff out there
Means a lot to hear that thanks
@@paulskartslifan4206 Is it possible to make a top fuel predator/ single cylinder engine? Enough nitro borderlining hydrolock, and enough energy into the spark plug its like a arc welder. The spark plug would only last 5 seconds max, but the power is unheard of, how would one put that much amperage in these spark plugs?
Those valves look beautiful! Are they Chromoly ? Or Stainless
@@kylesyx8432 those are custom made valves (stainless steel)
Hey paul .. longtime fan over 10 years ago... bro can you fk a video on welding a block to strengthen it
@@funkyjunky6574 I got a lengthy video on my RUclips .. look through its all about welding blocks
Have a random question could i use 26lb valve srpings cus thats what i have? for 1.3 stamped rockers. On a stock pred cam
@@MrLopez-lm4jk technically yes I believe so they should fit .. if there perfect for that setup I’d need to see it
should slightly round off / blend those sharp edges to the quench pad. air speeds get a little too high right there right before TDC. Got some other tips if you want to hear them, dont wanna look like a dickhead know-it-all here.
@@jeremiahfiek5495 always ready to listen.. what’s up ?