The real headache for me was the nut on the krängningshämmare. Good if you can replace the fjäderbenslager without taking everything apart then you have to do a new wheel alignment.
Hi. If the screw threads are protruding more "through the nut" then I wouldn't worry as long as you have tightened the nut with a reasonable torque. I added a stack of washers below the nut just to get easier access to it.
Hi. If you mean the top black plastic cover. It had come loose by itself. Poke beneath the flenge on the cover and the body structure. It is just clipped in position.
Nicely done! Thx for the explanation!
The real headache for me was the nut on the krängningshämmare.
Good if you can replace the fjäderbenslager without taking everything apart then you have to do a new wheel alignment.
Ska byta höger topplagring på min A2a inom snat framtid så tackar för en bra video. 👍🏻
Also the right side. Weird, isn´t it?
Jag bytte enligt din video, men min mittenskruv från stötdämparen sticker upp en bra bit ovan muttern, har jag spänt den för mycket?
Hi. If the screw threads are protruding more "through the nut" then I wouldn't worry as long as you have tightened the nut with a reasonable torque. I added a stack of washers below the nut just to get easier access to it.
Hur fick du bort kåpan?
Hi. If you mean the top black plastic cover. It had come loose by itself. Poke beneath the flenge on the cover and the body structure. It is just clipped in position.
два раза менял эти подшипники, и третий раз буду менять передние пружины. Пружины лопнули
Interesting. My cars springs are still ok though.