Must say, mine started a 300000 km, it's been one of the most reliable cars I've ever owned and not to mention, I never changed transmission fluid since I bought it new. I'm just going to drive it untill the engine blows up. It doesn't owe me anything.
You know somewhere, somebody knows exactly why all these roller followers are failing prematurely. It reminds me of the same issue present in the 5.4L 3 Valve ford engines (which are notorious for Cam Phaser and timing chain guide/tensioner failure). Ford Tech Makuloko did a great set of videos addressing the followers failing on those engines as well, and this feels right similar. I would say poor material quality in the follower bearings (and likely the cams as well) is probably to blame. It is no secret manufacturers choose quantity over quality for mass production. AKA these followers using cheap questionable materials, along with the recommended oil being basically water these days (5w20 or 0w20) and i would say you have the perfect recipe for failure.. now i know somebody is gonna chip about my comment so go ahead, chirp all you want. But with what i have observed over the last 13 years there are so very few engines being made these days that can even come close to what was produced prior to 2010~ the actual metals being used in modern engines have been reduced to 'bare minumum standard' just to get you through the warrenty period.. Do you actually think manufacturers care about how long your engine lasts?? LOL dont kid yourself, they only care about $$$
All engines have their quirks. This engine is really good, but research is your friend. I have a 2019 dodge charger with the 3.6. I was proactive and replaced the oil cooler. I have upgraded the hell out of this engine but totally forgot about the ticking. I have had this car since 100 miles and in 3 years only have 7600 miles. The ticking remains, and this gave me confidence to go to the Dealer. Worse comes to worse, I will do it myself. I am just worried about the modifications I did the car, will dodge pull the you did work, that violates the warranty. The ticking when it is cold is almost non existant, but when the car warms up, you can clearly hear it idle. This just confirmed my initial thought, it was rocker arm noise. If i have to do it myself, i plan to do all rockers and lifters. No reason not to at that point. I really wish i could find performance rockers, might as well upgrade it while i am in there if i have too.
Best video I've seen on the 3.6 cam issue... going to be digging into my first 3.6 this week...no cam noise..I believe a head gasket..high mileage engine..217k , runs great...but gets hot ..air in cooling system from combustion chamber I'm pretty sure...water stops moving....no water in oil or oil in water...kinda got me over thinking the issue.. removed thermostat... thought I had it figured out....bad thermostat right...nope.. Doing same thing...so I presure tested the cooling system... Would bleed down with no outside leaking of fluid....when restarted car..it had a miss a skip.... telling me there is a leak on the inside of the engine getting in now to the combustion chamber...from the head and or gaskets,,,this car is new to me... fixing problems as they come up...was not expecting to do a head job for sure....may just drop in a new engine if I find other issues with this one....0 Mile remand engine for it is 4,500$ ,,,,,5 year warranty.....
Just dropped another video recently with helpful info for diagnosing an issue such as the one you are describing. A good bore scope is worth it's weight in gold when it comes to this. They aren't that expensive either and they can connect to you phone. Here is a link to that video. I hope if helps further... ruclips.net/video/t4kdSMplNuA/видео.html
I believe lifters have a small spring in it and mostly pushed out by oil pressure. I would press on the lifters with my finger and watch them collapse under pressure. If it is not collapsing, it is frozen, and not good. If it is collapsing, I would keep using it. Am I right in my statement?
IS THIS A COMMON PROBLEM ON THE CURRENT/ NEW 2022 CHALLENGER WITH 3.6L PENTASTAR ENGINE? HOW ABOUT THE CURRENT 5.7 HEMI AND 392 ENGINES IN THE CHALLENGER REFERRED TO AS THE "HEMI TICK" EARLY LIFTER FAILURES?
The oil change intervals and oil quality are important. I’ll probably hit my 2017 challenger with slick 50 on next oil change. All my cars get a notebook with everything that was serviced by date and miles. Not many people bother with that anymore. Seems like a pain in ass job , one which I hope my 3.6 never suffers from.
Thank you so much for making this video. We recently purchased a 2022 Chrysler Pacifica Touring-L FWD model with the 3.6L Pentastar gas engine. On the day we purchased it, driving home from the dealership lot, I got the check engine light flashing...brought it back in and the dealership said it had P0300 (cylinder misfire). At first they blamed it on 'bad fuel' and did a full fuel system flush then reset the system. The check engine light still comes on and now they are saying it's something related to camshaft but not being a mechanic and them not sharing the part I'm not sure what they mean. They tell me the vehicle is now going to be with them waiting for parts until mid-Feb..... In your opinion what could they be talking about considering this is a NEW vehicle I cannot see it being any sort of wear. The mechanic mentioned something about him being able to rotate the camshaft more than it should and something related to a locking pin for the oil...any idea what he could be talking about? THis is a bit of a nightmare for us because we traded-in our vehicle for this new van and now we are stuck with what might be a lemon.
I'm not sure. It stinks that EVERYTHING is on back order now days. This is a problem we deal with where I work too. Really makes it tough on techs. Especially makes it tough for customers. I'm sorry you are having this problem. I hope you get your vehicle back soon.
I have a Town & Country 2014 that has 3.6 Pentastar 130k miles, it keeps giving me misfire on cylinder number four I changed the ignition coil and spark plug but still the problem persists do you know what the issue is? Or is it even fixable?
Recently purchased a 2018 grand cherokee limited, seems my engine is making a sort of chugging noise, I also can hear a sort of ticking noise when I pull the engine cover off
Hi, I have a 2016 ram 1500 3.6 with an engine tick for the 4th or 5th time. The first time the dealer replaced the passenger side cams, rockers and lifters under warranty. I changed 5 rockers over a period of 100k miles and was always able to hear with a car stethoscope what side was ticking. Now I have a tick again but the valve covers are quiet but the tick is coming from the exhaust close to the manifold? Anyone have an answer for this. 170k miles, every 6k miles oil change with Pennzoil.
Hi good video and nice jop,but I’m olso I recomend the costumer replace the lifters,in case lifters stop pumping the oil,just sugestión,other and that is very good explanation 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
I really need some help If my rocker arm is bad and is making a knocking sound would it just make the sound only when Idling and not when driving. I also have a code for loose gas cap but I have replaced it and I still have that code could that have something to do with the sound it’s making
What I'd like to know is how to remove the camshaft, deal with the chain, retime the camshaft etc. Maybe that's a different video, but is part of changing the rocker arms.
Yes, that is a different video that I have not made. This video is just an informational video not a "how to". I'm sure there is something out there on youtube though.
![BRASIL vs. PERÚ [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/tbyOJKXfQnI/mqdefault.jpg)
Must say, mine started a 300000 km, it's been one of the most reliable cars I've ever owned and not to mention, I never changed transmission fluid since I bought it new. I'm just going to drive it untill the engine blows up. It doesn't owe me anything.
I'm at a similar spot you were last year.
I'm curious to know, how's your engine running?
You know somewhere, somebody knows exactly why all these roller followers are failing prematurely. It reminds me of the same issue present in the 5.4L 3 Valve ford engines (which are notorious for Cam Phaser and timing chain guide/tensioner failure). Ford Tech Makuloko did a great set of videos addressing the followers failing on those engines as well, and this feels right similar. I would say poor material quality in the follower bearings (and likely the cams as well) is probably to blame. It is no secret manufacturers choose quantity over quality for mass production. AKA these followers using cheap questionable materials, along with the recommended oil being basically water these days (5w20 or 0w20) and i would say you have the perfect recipe for failure.. now i know somebody is gonna chip about my comment so go ahead, chirp all you want. But with what i have observed over the last 13 years there are so very few engines being made these days that can even come close to what was produced prior to 2010~ the actual metals being used in modern engines have been reduced to 'bare minumum standard' just to get you through the warrenty period.. Do you actually think manufacturers care about how long your engine lasts?? LOL dont kid yourself, they only care about $$$
All engines have their quirks. This engine is really good, but research is your friend. I have a 2019 dodge charger with the 3.6. I was proactive and replaced the oil cooler. I have upgraded the hell out of this engine but totally forgot about the ticking. I have had this car since 100 miles and in 3 years only have 7600 miles. The ticking remains, and this gave me confidence to go to the Dealer. Worse comes to worse, I will do it myself. I am just worried about the modifications I did the car, will dodge pull the you did work, that violates the warranty. The ticking when it is cold is almost non existant, but when the car warms up, you can clearly hear it idle. This just confirmed my initial thought, it was rocker arm noise. If i have to do it myself, i plan to do all rockers and lifters. No reason not to at that point. I really wish i could find performance rockers, might as well upgrade it while i am in there if i have too.
Best video I've seen on the 3.6 cam issue... going to be digging into my first 3.6 this week...no cam noise..I believe a head gasket..high mileage engine..217k , runs great...but gets hot ..air in cooling system from combustion chamber I'm pretty sure...water stops moving....no water in oil or oil in water...kinda got me over thinking the issue.. removed thermostat... thought I had it figured out....bad thermostat right...nope..
Doing same thing...so I presure tested the cooling system...
Would bleed down with no outside leaking of fluid....when restarted car..it had a miss a skip.... telling me there is a leak on the inside of the engine getting in now to the combustion chamber...from the head and or gaskets,,,this car is new to me... fixing problems as they come up...was not expecting to do a head job for sure....may just drop in a new engine if I find other issues with this one....0 Mile remand engine for it is 4,500$ ,,,,,5 year warranty.....
Just dropped another video recently with helpful info for diagnosing an issue such as the one you are describing. A good bore scope is worth it's weight in gold when it comes to this. They aren't that expensive either and they can connect to you phone. Here is a link to that video. I hope if helps further... ruclips.net/video/t4kdSMplNuA/видео.html
Is there anything that can be done to prevent this from developing (i.e. using a different oil viscosity)?
FANTASTIC TUTORIAL. VERY COMPREHENSIVE AND ARTICULATED.
This video was GREAT!!! So much detail and awesome explanation. Got my gratitude and my follow!
Welcome aboard!
Nailed it 💯 thank you now i can rest knowing a mechanic can’t come back an just tell me anything 😮💨
I believe lifters have a small spring in it and mostly pushed out by oil pressure. I would press on the lifters with my finger and watch them collapse under pressure. If it is not collapsing, it is frozen, and not good. If it is collapsing, I would keep using it. Am I right in my statement?
This is a repost of a video I had made some time back. I felt additional information needed to be added. Here you go!
IS THIS A COMMON PROBLEM ON THE CURRENT/ NEW 2022 CHALLENGER WITH 3.6L PENTASTAR ENGINE? HOW ABOUT THE CURRENT 5.7 HEMI AND 392 ENGINES IN THE CHALLENGER REFERRED TO AS THE "HEMI TICK" EARLY LIFTER FAILURES?
The oil change intervals and oil quality are important. I’ll probably hit my 2017 challenger with slick 50 on next oil change. All my cars get a notebook with everything that was serviced by date and miles. Not many people bother with that anymore. Seems like a pain in ass job , one which I hope my 3.6 never suffers from.
Thank you so much for making this video. We recently purchased a 2022 Chrysler Pacifica Touring-L FWD model with the 3.6L Pentastar gas engine. On the day we purchased it, driving home from the dealership lot, I got the check engine light flashing...brought it back in and the dealership said it had P0300 (cylinder misfire). At first they blamed it on 'bad fuel' and did a full fuel system flush then reset the system. The check engine light still comes on and now they are saying it's something related to camshaft but not being a mechanic and them not sharing the part I'm not sure what they mean. They tell me the vehicle is now going to be with them waiting for parts until mid-Feb..... In your opinion what could they be talking about considering this is a NEW vehicle I cannot see it being any sort of wear. The mechanic mentioned something about him being able to rotate the camshaft more than it should and something related to a locking pin for the oil...any idea what he could be talking about? THis is a bit of a nightmare for us because we traded-in our vehicle for this new van and now we are stuck with what might be a lemon.
I'm not sure. It stinks that EVERYTHING is on back order now days. This is a problem we deal with where I work too. Really makes it tough on techs. Especially makes it tough for customers. I'm sorry you are having this problem. I hope you get your vehicle back soon.
I just had the rocker and lifter issue fixed on my 2015 grand Cherokee with 128k miles. Cost me $2600
I have a Town & Country 2014 that has 3.6 Pentastar 130k miles, it keeps giving me misfire on cylinder number four I changed the ignition coil and spark plug but still the problem persists do you know what the issue is? Or is it even fixable?
Recently purchased a 2018 grand cherokee limited, seems my engine is making a sort of chugging noise, I also can hear a sort of ticking noise when I pull the engine cover off
Strangely enough my Dodge Durango had an intermittent ticking. I use full synthetic oil every 4000 miles and I haven't heard it much any more
Hats off, great video my friend.
Looks like you have some good videos too! Thanks for the comment.
Hi,
I have a 2016 ram 1500 3.6 with an engine tick for the 4th or 5th time.
The first time the dealer replaced the passenger side cams, rockers and lifters under warranty.
I changed 5 rockers over a period of 100k miles and was always able to hear with a car stethoscope what side was ticking.
Now I have a tick again but the valve covers are quiet but the tick is coming from the exhaust close to the manifold?
Anyone have an answer for this.
170k miles, every 6k miles oil change with Pennzoil.
Any problems with 3.6 Pentastar motor ? Grand Cherokee 2020
Hi good video and nice jop,but I’m olso I recomend the costumer replace the lifters,in case lifters stop pumping the oil,just sugestión,other and that is very good explanation 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Ok thanks!
Just did a right bank exhaust cam for the same failure. 2016 grand caravan
Great information!
I really need some help
If my rocker arm is bad and is making a knocking sound would it just make the sound only when Idling and not when driving.
I also have a code for loose gas cap but I have replaced it and I still have that code could that have something to do with the sound it’s making
Never heard of a gas cap issue causing a knocking noise.
Very helpful and appreciated! Thanks!
What I'd like to know is how to remove the camshaft, deal with the chain, retime the camshaft etc. Maybe that's a different video, but is part of changing the rocker arms.
Yes, that is a different video that I have not made. This video is just an informational video not a "how to". I'm sure there is something out there on youtube though.
Is there anything i can do to prevent this or limit my chances?
Not that I know of. Maybe it wont happen to yours. Not every Pentestar does this.
Good video, good communication skills
Great video.
Good video, thanks for posting.
Thanks
No prob!
I have this problem at 11 years and 216000kms, I have to replace cylinder heads and two cams 😢
Nice job of interpretation
You are the man!
Isn't there a law suit or case about this situation?
Not that I am aware of. Of course I didn't research it though.
My 2020 still has a ticking sound when you get up to 2600 rpm
Good job❤
Thanks 😅
It will cost 2100 just to get new rocker air and 4 cams might as well buy new 3.6
Nice video!
Thanks!
This should be recalled
Chrysler new updated rockers are now made in Taiwan vs China
🔧👍
my 2016 caravan makes ticking noise
It looks like the engine was looked after
Yup 2017 failed 72000 miles
Im caught up between rebuilding the engine i have and rebuilding a low mileage Junk Yard engine,
Either way I ONLY WANT TO DO THIS ONCE!!!
Buy the new rebuilt motor
You got me very stressed out
Why so? These are good engines.
@@BarboursAutoHelp I don’t know if you are being sarcastic or not?
@@AlexanderRodriguez-ni4kt No, I really do think they are good engines. No sarcasm.
Excellent video..
Thank you very much!