I sometimes have trouble getting the first two bights of a long Turks head knot started, and this is the video I always come back to. Perfect demonstration, no unnecessary chattering... Thank you!
Try using a screw clamp for the one end rather than a rubber band I myself am still learning and need to make a longer one in order to do what I want but using the screw clamp helped me drastically in the learning process and I've only been at it for about 3 days when it comes to globe knots or turkshead knot also what's the difference between the two I can't tell
@@kennethpaschall6811 globe knots can be formed into a sphere whereas Turks head knots typically cover something cylindrical (or mostly cylindrical like a handle). Globe knots are really good to tie around steel ball bearings or wooden beads to make a great end of a key fob. Tying them is really similar though. Many of the differences come in the tightening & finishing steps.
Great demo thanks! But I also want to learn how to do the interweave, as in the pineapple knot on this long knot. I'm not keen on doubling and tripling.
Hi David, nice Jobs! About the first knot, I don't remember how to finish the knot at the top (to place on a metalic fid using in very cold weather ) how to finish this roundish part. thanks by advance for a new tuto on this chanel. Capt Patrick.
This was nice, I have been searching for a design using three colors to go around the top of a walking stick (cane). Any deals of where to search. Thank you. I am new at this
You can tie this knot with three colors, just make the knot with one color first, then follow the pattern from start to finish with the second color, and again with the third color. The excess cord at start and end can be trimmed and tucked after you tighten up the knot. To tighten, you gradually work the slack out, from start to finish with each color. Don't try to do it all in one pass, just work some slack out of each color in order, and go back and do that again, from start to finish. It may take two or more times to get the knot tight, keeping it straight and lined up as you work, very time consuming, but worth it in the end. ;)
hey storm i enjoy your videos... i been searching for mored videos on braids. are there any website i can look for? how long is needed to make a bracelet or a lanyard?
+khairoen The amount needed can change for each pattern/design that is done including such variables as diameter of particular cord you're using, different types of buckles/clasps/closures, and how tight or loose you tie a particular knot, as well as if you trim and melt/sew/glue or tuck the end strands too. There are folks that share specifics for patterns they tie, like in this video: ruclips.net/video/OhLsR4a9dEs/видео.html But, to narrow it down, I've found it best to just tie a short sample of a pattern with a known length of cord, see how much you used to make an inch or two of that pattern out of the length you tied it with, then multiply that by what you need a finished length to be, and add in extra to account for buckles, loops, core strands and whatnot so you don't come up short in the end. It's a very mathematical situation if you break it down, and I'm no mathematician, lol. There are turk's head calculators online too, that can figure out lengths based on leads, bights, core diameter you're tying around and cord size too: upstream.50webs.org/turkshead/turks.html
+NEZAHUAL There are two strands of paracord in the core of that lanyard, of a doubled up single strand length. There is more info in my blog post on that particular project: stormdrane.blogspot.com/2010/10/long-turks-head-knot-lanyard.html
+Stormdrane (David Hopper) Awesome. Thanks for the link. Also, how did you attach the snap hook at the end? Did you loop the two strands from the lanyard knot back into the. knot then sew it to keep it in place?
+NEZAHUAL I ran the two paracord strands, coming out of the long TH knot, around the snap hook then tied the lanyard knot around those core strands, working the knot down to the TH knot and tightening it up, and trim the ends to finish that knot in place. Needle and thread can be run through the lanyard knot and core strands to further secure it, as well as sewing through both ends of the long Turk's head knot and core strands to make sure that knot stays in place too. From where I stopped with the long TH knot, I could have worked more slack out of it, but that would have shortened it up even more length wise than I wanted, so sewing thru the ends of the TH and core strands keeps it in place and from getting twisted or moving around over the core strands. Hope that makes sense.
Las hago simplemente con un pedazo de tubo de cobre de 1/4 de pulgada para gas LPG. Más sencillo; Las agujas de tejer recortadas funcionan muy bien, y se usa un poco de cinta eléctrica par fijar la cuerdita a la aguja.
Wow thirteen minutes of either silence or the majestic sound of wind blowing on a microphone... obviously knows his knots but for the purpose of explaining what your doing so others can easily follow along this video get a 1 out of 10
It just goes to show that a good clear method of demonstrating anything beats a lot of, sometimes useless chatter. Well done. And thanks a bunch.
I sometimes have trouble getting the first two bights of a long Turks head knot started, and this is the video I always come back to. Perfect demonstration, no unnecessary chattering... Thank you!
Try using a screw clamp for the one end rather than a rubber band I myself am still learning and need to make a longer one in order to do what I want but using the screw clamp helped me drastically in the learning process and I've only been at it for about 3 days when it comes to globe knots or turkshead knot also what's the difference between the two I can't tell
@@kennethpaschall6811 globe knots can be formed into a sphere whereas Turks head knots typically cover something cylindrical (or mostly cylindrical like a handle). Globe knots are really good to tie around steel ball bearings or wooden beads to make a great end of a key fob.
Tying them is really similar though. Many of the differences come in the tightening & finishing steps.
@@dezwujie thanks
I learned more from your video than most. You DIDN'T have to say a word. Very good instruction.
とっても美しいです。こういうのを使ってリードとか作れないかなーって思いました。ありがとうございます
Very well done, I really like your examples at the end.
This is excellent !
the cord is easy to find on Amazon and Ebay. ALL Kinds of colors ...
good vid thanks
Thanks for the video. I have used it several times for different woodworking projects.
i ve been trying to do this for a week
only this video helped.
Muito bom ótimo vídeo... Mg Brasil.
Maravillosos trabajos manuales, con un poco de paciencia y manitas,se podrá realizar algún que otro trabajo.
Enhorabuena y gracias por compartirlos.
Great demo thanks! But I also want to learn how to do the interweave, as in the pineapple knot on this long knot. I'm not keen on doubling and tripling.
Thanks a lot.
Exactly what I was looking for.
Hi David, nice Jobs!
About the first knot, I don't remember how to finish the knot at the top (to place on a metalic fid using in very cold weather ) how to finish this roundish part.
thanks by advance for a new tuto on this chanel.
Capt Patrick.
Great Video! Got a Q for ya. Can you give me (Us) an idea of how much para-Cord it takes for say, a 3", 6', 12" Work? Thanks!
+Patriotic Saint Try using a tool like the turks head calculator: www.knot-everything.org/app.php/page/th_calc
I tried to view bud brewers tutorials and the site isn’t working.
This was nice, I have been searching for a design using three colors to go around the top of a walking stick (cane). Any deals of where to search. Thank you. I am new at this
You can tie this knot with three colors, just make the knot with one color first, then follow the pattern from start to finish with the second color, and again with the third color. The excess cord at start and end can be trimmed and tucked after you tighten up the knot.
To tighten, you gradually work the slack out, from start to finish with each color. Don't try to do it all in one pass, just work some slack out of each color in order, and go back and do that again, from start to finish. It may take two or more times to get the knot tight, keeping it straight and lined up as you work, very time consuming, but worth it in the end. ;)
Where can I buy or how do you call that needle that you are using for help to cross and work with?
+CHIVA IRREVERENTE
you can buy fids on ebay. I got a set of two for under $10
hey storm i enjoy your videos... i been searching for mored videos on braids. are there any website i can look for? how long is needed to make a bracelet or a lanyard?
+khairoen The amount needed can change for each pattern/design that is done including such variables as diameter of particular cord you're using, different types of buckles/clasps/closures, and how tight or loose you tie a particular knot, as well as if you trim and melt/sew/glue or tuck the end strands too.
There are folks that share specifics for patterns they tie, like in this video: ruclips.net/video/OhLsR4a9dEs/видео.html But, to narrow it down, I've found it best to just tie a short sample of a pattern with a known length of cord, see how much you used to make an inch or two of that pattern out of the length you tied it with, then multiply that by what you need a finished length to be, and add in extra to account for buckles, loops, core strands and whatnot so you don't come up short in the end. It's a very mathematical situation if you break it down, and I'm no mathematician, lol.
There are turk's head calculators online too, that can figure out lengths based on leads, bights, core diameter you're tying around and cord size too: upstream.50webs.org/turkshead/turks.html
how many strands of paracord core did you use for the tan and black lanyard 12:47 ?
+NEZAHUAL There are two strands of paracord in the core of that lanyard, of a doubled up single strand length. There is more info in my blog post on that particular project: stormdrane.blogspot.com/2010/10/long-turks-head-knot-lanyard.html
+Stormdrane (David Hopper) Awesome. Thanks for the link. Also, how did you attach the snap hook at the end? Did you loop the two strands from the lanyard knot back into the. knot then sew it to keep it in place?
+NEZAHUAL I ran the two paracord strands, coming out of the long TH knot, around the snap hook then tied the lanyard knot around those core strands, working the knot down to the TH knot and tightening it up, and trim the ends to finish that knot in place.
Needle and thread can be run through the lanyard knot and core strands to further secure it, as well as sewing through both ends of the long Turk's head knot and core strands to make sure that knot stays in place too.
From where I stopped with the long TH knot, I could have worked more slack out of it, but that would have shortened it up even more length wise than I wanted, so sewing thru the ends of the TH and core strands keeps it in place and from getting twisted or moving around over the core strands. Hope that makes sense.
fabulous!! thank you!!
How do u make it
Muito bom!!!
quisiera saber como se llama ese aguja
Perma Lok Super Jumbo Lacing Needle ruclips.net/video/fuoh_yYKd9A/видео.html
puedes ocupar una aguja de cáñamo, la encuentras en cualquier ferretería
Las hago simplemente con un pedazo de tubo de cobre de 1/4 de pulgada para gas LPG. Más sencillo; Las agujas de tejer recortadas funcionan muy bien, y se usa un poco de cinta eléctrica par fijar la cuerdita a la aguja.
estoy aprendiendo mucho me gusta
Perfect
You need to explane what you are doing. It is very confusing without words.
gorewhore211 cant you read? turn on the annotations
agree!!
+captainnemo maybe he's watching it on a phone or so? phone's dont display annotations.
I concur
ruclips.net/video/OoWnTcQc4v4/видео.html&google_comment_id=z13wxboj3kzijvsdw22kzzywvom0znqmb
This is cool,..
Wow thirteen minutes of either silence or the majestic sound of wind blowing on a microphone... obviously knows his knots but for the purpose of explaining what your doing so others can easily follow along this video get a 1 out of 10
nice
good~ thank you
@1 min 6 secs I lost it! aaaaaargh! : )
hermosos
Pas facile à refaire pour moi
No entiendo lo dice el ingles y no se dice lo que esta hablando los lenguajes no tiene español
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻