CS-A barbed wire machine, Whatsapp/Mobile 0086-15503289596
HTML-код
- Опубликовано: 4 дек 2016
- CS-A barbed wire machine produce the barbed wire speed is 1Ton/8hour.
1.It is designed to produce double-strand barbed steel wire.
2.The machine is of horizontal design,consisting of two parts,assembled together at the middle.
3.It is safe and reliable in operation,capable of turning out high quality products with consistency.
O inventor desta máquina é um GRANDE génio eu conheço arame farpado a 70 anos anos e nunca tinha visto como fabricava fiquei feliz de ver me tirou a dúvida como fabricava muito obrigado por este vídeo parabéns. Até vou gravar este vídeo. Obrigado mesmo.
Nossa que máquina gigante e complexa de se entender, quanta inteligência, eu sempre tive vontade de saber como se faz arame farpado, agora já sei parabéns pela sua demonstração.👍👏👏👏
Qual será o preço de uma máquina dessas?
I would like to see some slo-motion video, especially the part of the machine where the two wires come in from the sides and become wrapped around the long continuous wires. I can’t understand how that process works from looking at this video. The quality of the picture is very good, and I can see that the workers take good care of this beautiful machinery. Thank you for the presentation.
E fantástico ver o funcionamento dessas máquinas parabéns
*Bonito além do processo todo é a inteligência desses engenheiros !*
ruclips.net/video/301Y6cXE8x0/видео.html
contact us on www.fencingmachines.com.
Looks very safe and operator friendly, what could possibly go wrong?
Even OSHA would approve of this.
Ed S ظ
Is a factory.. not Disney word
They are not even wearing eye protection
@@PaulWalker-lk3gi Why the need? Are they using dangerous chemicals?
@@samuellourenco1050 I guess if you got a little bit of barbed wire in your eye you could just pick it out with tweezers :)
Ingenio chino mala reputación tienen,porqué a veces hacen huevadas, pero hacen, ,,,,,,y del genio de ellos muchas cosas tenemos, gracias chinitos. Saludos desde cuenca ecuador. .?
Love how you have to lean right over all the open gears to operate the controls and get to the E-Stop. Crazy!
Expendable labor supply...
"3 It is safe and reliable in operation". Bend over the moving deadly parts to get to the control. Whoever designed that should be shot. Move the panel to the front. at the 6:45 mark you can see them oil the machine while it run. I do not call that reliable if they need to oil it every 5 minutes. Also, grease would last way longer. Auto-greaser or even oiler would be inexpensive yet be so safer... A tank, a solenoid, a few needle valve, some pipes and bit of pressure and that's it.
not one safety guard,or screen.
I love the armchair millwrights. First off, worked around this type of machine for many years. Every country is different, so safeties are added on site. You cage it and install oilers and safeties as per each countries standards.
Omprakash yogi
Yo siempre quise saber cómo se hace el alambre de púas...esto es genial... fantástic video i love it thanks... gracias...
कमाल है कामगार और करागिरी को प्रणाम💐💐💐👌👍
Impressionante muito bom excelente trabalho.
By reading the posts it's nice how many people see the dangers with this machine ! Also No safety glasses, gloves ! WTF 😎
Parabéns ,exelente trabalho.
👍🇧🇷
Meu Deus quem inventou esse extrandak aí é inteligente d+!?.
Seria ótimo se os arames de hoje fosse fabricados na mesma qualidade dos antigos
Beautiful and ingenious. Also ridiculously dangerous, I'd not go within twelve feet of it when in operation.
All I can think is that I hope this is a demonstrator with all the covers off. That thing would be a finger eater on a factory floor.
I have used many miles of this around 480 acres, 5 strand fence, with 4 wire ,4 inch spacing barbed wire.
ত্র
Lần đầu mình thấy công nghệ này hay quá
Wow amazing a making babwire..thank you..
Parabéns muito loco..
Are you hiring? My mother-in-law needs a job operating that exact machine...
Interesante máquina, trabaja bien. Le faltó cámara lenta.
Se puede ver en cámara lenta usando los 3 puntitos del reproductor de yuo tuve
So..., you have to reach OVER the machinery, to access the power/emergency shut off control panel.... brilliant.
This is probably just a demo setup, the box with the control could be places elsewhere.
@Artyom Sherwin Also, there is no need to limit yourself to only one emergency stop. There could several installed so one emergency stop is always within easy arm's reach of the operator.
Yep, this is designed to kill , or remove some body parts, a few guards would help. Actually a lot of guards, and some serious isolation to ensure it could not be activated during the wire feeding.
Thanks for the video, very interesting.
Good job!
Incrível e de mais muito interessante
Hola que buen trabajo ase la máquina
OSHA would have a payday if that shop was in the USA.
Very talented work
Muito interessante !!!
you are young ,you have a long life ahead of you,
why both of you don't have protection for your eyes when you work on steel wire all the time,so you will avoid your eyes poke , beside that very nice vid,
thanks
The oil pourer has the best job ever
tqq u tube for many technical video giving
Krishna Lodagala સ
Excelent work
That noise is so satisfying
lplvfu
In the US we hear lots of bitching about OSHA and other govt regulations, but keep in mind that this is the kind of crazy dangerous stuff we’d have without em. I worked in factories with dangerous equipment for decades, but at least here there are laws protecting workers from things like this. Even so, many companies are constantly trying to get away with stuff. OSHA may be a bother for some, but without it we’d have many more sick and injured workers.
Good UI and ergos
Well Dragon Medler, you are seeing America about 150 years ago. We started out doing things on small, practically unsafe also. Some still in production today. Heck, we got kids eating soap pods, do we expect them to operate machinery. Heck, most couldn’t pass the tests to operate a wheelbarrow.
Way more convoluted than I thought
รคร่าฝวะฟฟะธหะพหหา
Aspirsdoras
@@user-sg9vg3jt2b d
Show de bola ok Brasil.
MUITO BOA MAQUINA
and for this purpose,
were you brought into existence.
(.....bravo...)
와 이런 기계 처음본다 대박
Super video bro.
Bıdeonun ilgınç ve teknık yonlerını ağır çım olarak gosterseydınız dahada guzel olurdu
Amazing work
Son unos verdaderos héroes. .😭casi lloro
Impressionante
Cool video. Slow motion would have gotten more likes.
That barbwire machines got beat.lol
Incrível!
The controller box on a different position, facing away from the mechanisms would be nice. A protection cage would be better.
Tu
TOO long- edit down and put in some slow motion
Parabens pelo trabalho a in ven são du ome .e. Muito en teligente.Nota .10
muito interessante
I'm pretty sure that the original machine wouldn't have been anywhere near as complicated as this back in the 1800's when the stuff was invented back in 1879....................
Einfach s u p e r 👍👍👍
So you have to reach over the unshielded spinning gears to hit the emergency stop. Got it.
سبحان الله العظيم
Isto é incrivel
Super 🇨🇮
good job
Mantapp,,,,,
tek kelimeyle mükemmel.
OSHA? We don't need no stinkin' OSHA!
excellent
Eu sei fazer eu trabalhei nestas maquimas eu trabalhei na belgo mineira hoje arcelo mital
E uma arte
Nice to see lot's of guarding on that machine.
Good
top amigo
*GOOD*
ابداع
great machine
Atende NR 12 de vez em quando sai um amarrado no arame farpado
Apka contact details kya hai
Who designed this machine? In which country it is installed,0% security.
Boy! You don't want to get too close to that thing!
Nice
Very nice
Uh reaching across all those moving parts to start and stop the machine dosent seem user friendly. Turn that control panel around to the outside.
WOW 😮
Que inteligecia
Very good
Supar
Thanks
I'm still not sure how barber wire is made
Iike the big rotating wheel to the left when you have to E-Stop the machine.
Lo pueden transportar a México???Y cuanto vale en dólares estoy interesado en comprar
O arame farpado é perigoso desde a sua fabricação hem . Kkkk
ruclips.net/video/301Y6cXE8x0/видео.html
contact us on www.fencingmachines.com.
Super
Soy chileno y trabajo en una industria de alambre y soy puero de púas iowa y puas motto
Safi saana
Bare nice
Yo lo he hecho con tan solo un taladro y claro el alambre
Wonder how many torn shirts, fingers, arms, body parts down below the machine
The clicky thingy before the wirly do dad looks out of adjustment.
could you please send quotation for this machine FOB,CIF & CFR Price
Mohamid /macheen bearee bearee spen siv
How much will prices, and Production capable? What is the SAFETY If operator & machines?
E interecanti nunca tinha vistu
💪🏾💪🏾👏👏👊🤜🤛