[Solved] PHILIPS TV Stuck on Logo Screen, Opening screen || Continuously Restarting, Logo Flashing
HTML-код
- Опубликовано: 1 авг 2019
- When turning on Philips TV it stays frozen on the Philips logo. called and was told that I needed software update is this true. Philips TV can only be turned off by unplugging it remote or side power button will not work.
1. My PHILIPS tv stuck on the start screen
2. Why my PHILIPS tv stuck on logo screen every time.
3. What to do when a Philips TV reboots or freezes?
Solutions:
Philips software engineers continuously improve the TV’s stability via software adjustments.
However, here are a few steps that could stop the reboots:
1. Unplug all devices
Unplug all devices connected to the TV. This includes set-top boxes, CI+ modules and hard disks.
If the TV continues to reboot, leave the devices disconnected and proceed with step 2
If the reboots have stopped, leave the devices disconnected and proceed with step 3
2. Restart the TV
• Unplug the TV from the wall socket for at least 1 minute after the LED light has switched off
• Switch the TV ON and leave the devices disconnected
If the TV continues to reboot , leave the devices disconnected and proceed with step 4
If the reboots have stopped, leave the devices disconnected and proceed with step 3
#PHILIPSTVStuckonLogoScreen
----------------------------------------------------------------------------------------------
►Video Editing Software: Filmora 9
►Sound: Filmora
►Produced by FixNetflix Team
----------------------------------------------------------------------------------------------
► Please Remember to Subscribe channel: goo.gl/yqupti
Fair Use Disclaimer:
This channel may use some copyrighted materials without the specific authorization of the owner but the contents used here falls under the “Fair Use”
Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
This worked great! THANK YOU!!! 🥰
Hi Pam Blackwood, you’re most welcome dear friend.
And thanks for your nice sharing.
Please subscribe the channel channel and like & share this video with your friends.
Didn't work for mine. The TV automatically comes on when you plug it in.
Same!!!
Same
Same
@@inder_mit_rinder8467ta trouver une
Solution)
Hi I have 40pft5883/71 it doesnt have other power button aside from the remote. Any other options?
Hi! I´ve a
3500 series Smart TV Slim LED
32PFL3508G/78
Does it work to this TV Model?
Thank you =)
I can‘t find the steps 3 and 4 in the video description. Is there any further guide?
Hi. My Philips 32 PFH 4309/88 do not have pwr button. Only RControl. Look the NAND fault? How to be now?
Hi I have 55pus6401/12 it's still stucked in logo . Can u please tell me where I can download upgrade software for my TV.
I have a Phillips 75PFL5704/f7 that your information did not work on, it woll boot loop on Android scheen and will not proceed from there?? any other ideas?
I’m having an issue with mine. It will turn on load in show hdmi 1 and then restart again and continue to repeat the same process over and over again without fail. Could use some help. The model number is 55PFL5602/F7
This worked for me after a couple of tries. Thanks.
My philips 55PUT6233/56 TV unit When turned on, only the logo appears then after few seconds later appears black screen.
Omg this worked for my tv thank you so much i had tried so many other videos thank you!!!!!
Hi Jennyferjm, you’re most welcome 🌹 dear friend. Any additional support need please feel free ask to me.
Thanks for subscribe to the channel and share this helpful video with your friends and social media so others can fix the same problem by this easy method.
Hi, my Phillips 55pfl4901/f7 will turn on but went black after a few seconds. Replaced led backlight strip but the problem is the same and found out that one of the smd on strips keeps on failing. Any suggestions? Thanks..
Pls check the power supply board and main board. This is happening due to incorrect voltage supply from the capacitor.
Any difficulties please let me know and subscribe the channel.
Please share this helpful video with your friends and social media for helping others.
For days ive been Iooking on the internet for solutions to my philips android tv, i installed usb with wipedatatool, i tried to do update from usb with original firmware, i tried to reboot, i tried to find the wipe data in the bootloader but it isnt there (i even tried 1-2-x-4 method) i can only choose REBOOT NOW or UPDATE FROM EXTERNAL but when i choose one of those 2 options i get a black screen with android laid on its back and saying NO COMMAND. I cant acces the tv with ADB neither because the usb debugging wasnt enabled before i lost acces to the tv. Its a Philips 7600 series LED I dont know what to do anymore help!
Thank you... Absolutely 💯% spot on
Worked like a charm! Thanks!!!
It worked!! Thank you so much for the help
Hi, I have a 55pus7181 and it doesn't have a start button, how can I do that ?, it restarts until it reaches android recovery
thank you, this work on my TV too, thank and god bless you .
🙏🙏🙏🙏
I have aToshiba tv 2012 model and the logo just appears and I can’t change it from the remote and tv it’s stuck on the screen no matter what I press any suggestions
Hey Majestic, please unplug tv power cable for 10 minutes and hold power button for 10 seconds.
Now recheck the issues if same problem to that’s mean hardware issues. Incorrect voltage supply from psu. If you are expert in electrical circuits then open back cover and check any burnt components.
Otherwise call a repair man or send service centre.
Any further support needs please let us inform. Please subscribe the channel and share this helpful video with your friends and social media for ensuring happy entertainment everyday.
I did as the instructions stated. It powered on and is changing between the logo screen, fire tv and home screen and HDMI 2
You are indeed creative. The method worked. Thank you all
Phillip's tv turns on. Then it starts to channel up/down by itself. It goes to the menu display and the selections go up and down as if I was manually pushing the side buttons on the tv. I dont hv the remote anymore. It's almost as tho it is doing all of the button commands that were being pushed, just keeps going and going. Now it isn't responding to when I push a button, just keeps doing it's own thing. Please help. Thanks
I have the same issue here tv keeps looping in philps logo and I disconnect any device and did the power button trick but still nothing any suggestions? Also when you plug it start by it self it doesn’t wait for me to press the power button
Same problem. Did you ever find a solution?
Same here.. loops between logo and them round colour things.. tried the same, but yes flicking the switch back on the TV starts and it doesn’t give you the option to use the on/off switch on the back… what to do?
Hey i got a problem my Philips tv is turning on but the loggo doesn't it doesn't just show the light is expecting a picture alone
It is work for me . Thank you. Appreciate you
Dear Tj Mommy, you are most welcome mam.
Kindly share the tricks that worked for you, this will helps our new visitors.
Please share this helpful video with your friends and social media and support our little initiative for better solutions in future.
Hello .y don't have logo on screan only logo on tv that is glowing but not start
i have a phillips android ambient tv 43PUS6501/12 07.2016 i have tried what you say ...but still dosent work any sugestions? thx
Hey gaby, this is firmware issue. Please update firmware and hopefully this will solve the problem
please subscribe and share this helpful video with your friends and social media for happy entertainment everyday
I've factory reset my tv and all my apps are wiped I'm convinced. My tv is still stuck on the logo screen and its cutting on and off on its own. Any suggestions. Im desperate
Worked, thank you!
I did update in my 7600 series because the screen went black after logo dissapears when the update finished the black screen issue was solved and everything worked till i had to turn the tv off and on again it turns black again after philips logo at startup. Now i dont know how to get into systemrecovery there is no way i can enter systemrecovery holding the joystick down a menu appears that says boot now or download from externn devices but the joystick is not responding in the boot menu. I have read something about flashing the tv from pc does anyone know how to do this? I dont have the remote anymore
Plz any one help me i am having issue with my tv its in safe mode. And i want to hard reset it or to get out from safe mode.
55put6002/56 model philips led smart 4k not android. Pleaese help
reconnect 43 inch smart tv RELEB4304 stuck on logo. pls tell how to resolve. reply pls
Hi. I have a Philips smart tv 50PUS6162/12 model and suddenly stops working. Yesterday I got my TV updated and now I can't watch the news. I've tried everything I found on internet but without succes. A screen appear in a dark blue colour and I am pretty sure that, the remote control is working well.
Hi stefan petrov, please unplug your tv for 10 minutes. And then recheck the issues. If not helped you need to update fresh firmware via usb drive.
Download firmware by search on google via main board serial number.
Any support needs please let us inform.
Thanks for your subscribing and sharing this helpful video with your friends and social media for helping others.
salve la mia TV rimane il logo PHILIPS e lampeggia il led , non c’è verso di farla riprendere , mi potete aiutare ?
Thank you so much this actually worked for my tv i was kinda scared!!
How much i need to hold the button when i plug it in?
Worked the first time for me. Thanks guys
Hi micknills77, i am glad to help you. Thanks a lot for your nice feedback.
Any further support need please feel free to write me here. I will be happy to answer your all questions.
If this helps you please like subscribe and share this helpful video with your friends and social media so that others can take advantage from this video.
It didn't work for me. The tv turns on with the logo screen but after 20secs, it shuts off. Any suggestions? I recently replaced the power supply board like 2 weeks ago and it's been working fine. Then it started shutting off and turning on randomly and now, it only turns on and shut off after 10-20secs.
Incorrect voltage supply from psu. So please check voltage on psu and main board.
Open back cover and check any bulge capacitor.
Any difficulties please let us inform and subscribe the channel.
Thanks for your nice sharing this helpful video with your friends and social media for ensuring happy entertainment everyday.
No luck with this on my 48PFS8109 :( Immediately when I plug it back in, the bootloop starts again (showing Philips screen for a minute or so, then going to semi-standby and then after a minute or so the Philips screen again). Any tips?
Did u fix it?
32inch Philips LED TV, when power on using remote or power button, just logo appears like flash and the screen goes black. I have tried hold power button for 30secs and power cycle no help. Any advice how to fix it.
Low power supply from the power unit. May capacitor damaged. You need to repair the board or replace the power supply board.
Any difficulties please feel free to ask me.
Thanks for your nice efforts
I have the same problem with my 32inch Philips, any ideas or recommendations please? Thank you
Same problem i have 70 inch
Salut, eu am rezolvat problema ,am relipit memoria cu aparatul cu aer cald si functioneaza
Got a funny story. So i had a Phillips that kept rebooting. I tried everything is this video as well as others, took the battery out of TV remote to make sure it wasn't that...It wasn't tried hard reset by holding down the power button for two mins , didn't work. Tried a bunch of other shit as well, eventually i wound up getting so frustrated that i threw the remote at the TV and ruined the screen. lol Mind you this TV was used in my man cave and i also have the same exact TV in my living room. So i get a new TV and I'm setting it up in my living room to test it before putting it in the man cave and i hook my NVIDIA shield to it ...Don't you know my living room TV started doing the same thing!!! Turns out it was the firestick remote that i use with my NVIDIA shield causing the rebooting issue! I took the batteries out of the remote and boom no more rebooting! I't didn't even dawn on me to check the Firestick remote because i haven't used it in a while! So if you have a firestick hooked up to your TV or use their remote with any other device i would suggest giving that a check before buying a new TV or smashing it like an idiot like i did.
This cured mine…disconnected all my boxes and removed the batteries from the STB, reconnected the mains and back to normal. 😊
Mate. I love you. Literally about to throw my TV out and I saw your post. The fire stick was plugged into mains, but not into TV. Unplugged the fire stick and took batteries out of the controller and voila. No more boot loop. You are a ruddy legend.
@@cjbell3880 Glad i could help! I have posted this comment on a couple other videos as well as a few forums and it seems to be a pretty common problem with firestick remotes. Shame on Amazon lol
Hahaha, can't believe same thing here 😂
With Philips Full HD LED TV 32PFH4309/88 not work. Show Philips logo and stay on grey screen. No react any button.
It works but didn't have to wait 10 min. Thanks!
Did a factory reset on my Philips TV, to reset the blue tint, since I wasn't getting any results from the color boards. Now my TV will go through the installation process & the wifi set up, but it will not go pass the "loading" screen. Nothing I have tried has worked. Including the steps on this video. Please help!! 🙏🏼🙏🏼
My philips model 55pfl5402/f7 cannot connect to wifi and screen keep freezes
Well for me I don’t have that problem but I tried and steel didn’t work, the thing is that for me its says that it doesn’t have sign and the remote doesn’t want to work
hi
my philips 40pft4100. it will turn on automatic without pressing on button and stuck after logo then it will restart automatic continuous like that.......please solution at all-
did you find a solution ? i have the same problem with when i turn it on it goes stuck after logo then it will restart automatic continuously
Any solution
Please help sir. Good evening, im from philippines. I bought phillips smart tv model # 55PUT6103/56 in dubai UAE. Im in philippines now. My problem is the tv channels are black n white and no sound. I think maybe i dont know where to adjust the pal secam/ ntsc or auto. Can u help me how to find that settings? Or do u have and suggestions. Thank you in advance.
Check your country settings and set uk or Kuwait 🇰🇼.
Hopefully this will solve the problem.
Thanks 🙏 for subscribe the channel and share this helpful video with your friends and social media for ensuring happy entertainment everyday
It worked for me💯
Dear Manman, thank you for sharing the nice feedback.
Kindly share this helpful video with your friends and social media and support our little initiative to ensure happy entertainment everyday.
Mine got stuck with the Philips logo. I have tried it twice, it's not working. What else can I do please?
Did you even figure it out? I'm having this problem right now
@@rogerguiltyforbes8291I’m having the same problem. Did something work for you?
@@rogerguiltyforbes8291 did you figured it out, i just bought the tv and i have the Same Problem
I love my 2001 Philip Projector TV. But lately it seems to be hacked or controlled by someone else some where else. I use an antennae only.
I had a Samsung that did the same.
I had a screen but no pictures
ты просто наверное солей перебахала
This worked for my ancient 2009 model! Thank you!
Hey man, my Phillips TV 65inch not android but smart. Flashes the logo and then boots but then no picture but sound... So I know back light is fine.... But can you assist?
I have the same problem. Have you managed to fix yours?
Yes it worked thanks
Hi keena conery, you’re most welcome. -& thanks for your nice feedback. Any troubleshooting support needs please let us inform.
Thanks for your subscribing and sharing this helpful video with your friends and social media for helping others.
worked. thanks !!!!!!!!!!!!!
what if my tv turns on but volume is stuck on 100 and i have no control over the tv when i use the remote it doesn’t do anything. what can be the cause?
Please replace ir panel. Hopefully this will solve the problem.
Any further information need please let me inform and subscribe to the channel. Kindly share this helpful video with your friends and social media for ensuring happy entertainment everyday.
Hello, did you fix the problem, I'm stuck with the same?? Thanks in advance
Why would you hold the power button down on something that isnt even plugged in.........
Thank you it worked ❤
didn't help, tv powers on by itself gets to androidtv with pulse wave below it and won't go any farther
Dear sir, this is happening due bad psu or main board
I have tried this method but it's not working, I just have the logo for a few seconds then disappear, I have contacted the Philips service center and they told me I need to change the led lights :(
Nope. I have a Phillips mfr'd in 2021 and it just goes from its logo to black blank and back after moments despite attempting this fix several times, including with my batteries removed from the remote. It started exactly the day after I'd finished making the last payment on it.
Its same problem my philips smart tv stuck on logo and loading screen, i try your video but doesnt work any other way pls. Reply thanks
Hi renate ortega, if not solve the problem then re install the tv firmware or update via usb drive.
Any difficulties please let us inform and subscribe the channel.
Please share this helpful channel and video with your friends and social media for happy entertainment everyday.
@@FIXNETFLIX how to install tv firmware? I tried using this steps but dun work
@@FIXNETFLIX How to reinstall firmware? I updated firmware but now when i insert usb flash drive tv doesnt do anything! There is no data recovery option help
Hi! I have a similar issue. I have managed to select the installation language, after that the display remains lid, nothing else works. Have any idea on what am i supposed to do? Thanks in advance !
Please restart the or apply reset to factory settings.
Any difficulties please let us inform .
Please subscribe and share this helpful channel and video with your friends and social media for helping others.
Hello ,in my case its not working ...my philips screen logo will just flash for 1sec.then the screen continously black but the power still goes ...when i off the remote the power led then turns red...hoping thers another solution for this...tnx man
hello and congratulations. despite having followed your advice exactly, the TV does not go on and continues to stand still on the logo
You dont have to be an asshole, he helped many people and did this for free, you entitled little fuck
There's no power button on my TV it's brand new why is it having problems
Didn't work. My 40pft4100/12 turns on by itself each time I plug it in and keeps going between a black (still lit) screen and the logo
did you fix it? is so how?
Hi, I've got a bit of a different problem:
After I tried to update the software, the Philips TV tried to restart and now the Philips logo appears for like 5-10 seconds, after which the screen just goes black (it's still lit up). TV doesn't respond to the remote, neither to the built-in joystick button (red light flashes, but nothing happens). Seems like it must be some software issue, but when I tried to update the software with USB method nothing happens. Any ideas on how I can tackle this?
Had to send the TV to the local repair shop. The warranty had expired a month before the TV broke, but luckily they still took it in and repaired for free. Let's see how long it will last for...
Would love to know the fix for this
@@justthefactsmaam321 basically, I rolled back to the previous version of firmware, installation via USB stick. Also have to refuse any software updates which the TV keeps offering. Great product, Philips - good job.
How much do you think it cost to get it fixed ? I've got the same problem
@@andrii7201 Had the exact same problem! how did they fix it by USB if hte TV wont start?, or did they fix it using a PC and some software?
Please tv only work's by using a remote please how can I press hold please
If our TV has a power button it is in disguise. Any ideas?
Hi,
My Phillips tv is stuck on entering recovery system.....how do I fix that ?
Thanks
Hi did you fix?
My Phillips TV is stuck on the logo. It shows the logo for about 10 sec then it turns off and comes back on and continues to show the logo.
i have the same problem. Did you find the solution?
@@danielff7478 No
:"v
I tried your fix with no luck as soon as I plug the tv in it shows the logo any other tips
Same with mine
nope, didn't work for for me, i am losing my mind over this, the remote doesn't work, non stop android looping for 3 min, and again and again all the same etc.... my tv is 3years old, tv is on for 30sec, then android starts non stop... i already called for help, all i could hear oh its gonna cost you
can someone help me please
Did not work, I have never had any issue with any modern TV, with this being a common problem I would advise people to stay away from buying anything from Philips.
Hi son of America, unplug the power cable from electric outlet for 3min. And hold tv power button for 20 seconds.
Now recheck the issues. If same problem then let me inform and subscribe the channel.
Please share this helpful video with your friends and social media for helping others.
@@FIXNETFLIX my philips 55pusx9109 android tv stuck on Philips logo... can you please tell me what i need to do? Thanks
My tv as soon I plug it into the outlet it turns on by its self and it’s stuck on the logo I already tried doing the steps you said but it still doesn’t work. Help please!
did you find how to fix it?
I'm also wondering. I'm suspect i have to change mainboard in mine
I have the 65 in Android that was bought brand new in November 2021..and now just today December 22nd 2022..it goes from phillips logo to AndroidTv...and then back to logo ...over and over...and after unplugging it from my surge strip for 5 minutes and then plugging it back in ...it powers back to logo automatically and then like a broken record does it again! For the love of God ...HELP
@@nealbrokaw7655did you ever find a solution? I have the same problem.
Can't find the power button on mine? Anyone run into and fix it without one?
I have been onto Philips for over a year about diz Problem and keep sending me stuff to download and to do myself and kept closing the case now it's out of warranty Such a waste of 800e can't do nothing with it diz started happen 2weeks after I got it 😡
I done this and it worked, but I turned it off for the night and then the next morning I turned it on and it done the same thing it was doin.. WHY??
My tv shows the picture then it goes back to the logo screen
Didnt work
EDIT: 5 min later, it finally made progress where the input popped up but then black screened and is frozen on that again
ANOTHER EDIT: about another 5 min after that, it turned itself off and so I turned it back on and started back from square one
How do you fix philips tv that non stop turning ON and Off by itself??
did you find the solution?
My solution..is to buy a new tv.. u need to send to service..which im afraid they will Overcharge me! To which ive check..there is something wrong with some of the component!
Tv turend Blake screen ....how to fix it Philips
This worked!! Thank you!!
Ho pam blackood, really it’s like charm.
Thanks for your nice feedback and support.
Please subscribe the channel and share this helpful video with your friends and social media for helping others.
I hold and press the button 30 seconds but Not turns off
I have same tv but it shuts off after the logo appears
Ho darian daniels, if this is happening due to incomplete firmware update of tv then update again to complete the update or install new firmware via usb drive.
If not work then unplug the tv power cable and after 3 minutes later plug it back. Switch on tv and recheck the issues if same problem then check hardware issues of main board.
Any further support need please let me know.
Thanks for like subscribe and share this helpful video.
My Philips Android TV starts up in developer? store? Service? Mode. There's a black background with AF44 in giant red letters in the middle of the screen. On the left is from the top:
file code/TV config
Total checksum
Panel option code
Right upper side shows
White balance
FLICKER
USB/WLAN/ BT
While I don't have the original remote, I do have a Phillips replacement remote
The only thing I've been successful at doing is exiting that screen and getting a full red screen which then changes into green, then blue, then white. Gotta say, I am over it.
Same with me
I have universal smart tv it won't work on it
How can i get? The firmware tcl android tv 49s6500
Hi kim luk, please check as below method
How to fix TCL LED TV Wont Turn On But Standby Light Is On Due to Incorrect Voltage Supply
This did not work for me doing this did nothing
Hi jeffrey, if this method doesn’t work that’s mean hardware problem in the tv. May be due to incorrect voltage supply from the main board this problem created.
Please send to service center or try to repair the hardware problem.
Any further support need please feel free to ask me.
We will try our best.
If you don’t mind please like subscribe and share this helpful video with your friends and social media to support our work.
My tv just started turning off and on and then start to make a beep sound
IT'S A BOMB
How can I install the firmware if there’s no boot up menu? It just hangs on the Philips logo and the standby red led blinks repeatedly. I tried uploading the new firmare to an usb stick and plugged to the tv but does nothing. What else can I do?
Please should be ensure fat 32 format of usb drive format.
FIX NETFLIX the format is correct
Hi i have the exactly same issue did you solve it?
It didn’t work for me, the logo still flashes on the tv.
Did u solve this problem? I have same problem now. Thanks.
Didn’t work for mine
It worked! It actually fucking worked!! Thank you so much, really appreciate you! 🙏
tried this and now my TV won't even turn on haha! any advice.
😀😀👍👍
unplug it , take betteriez out the controller, unplug cable box from the hdmi port. hold power button and plug the tv in and hold power button until the logo goes away. problem solved
Dear sir, thanks a lot for sharing nice tips.
Any further support required please inform me. I will e happy to help you.
If this is helpful please like and share the video with your friends and subscribe to the channel for next tech video.