Exotic Wooden Mallets: The Ultimate Tool for Craftsmanship

Everyone Woodworker should have a wooden mallet. We made this one out of exotic hard words. African Padauk and Honduran Mahogany. The colors are amazing and it is a very tough and sturdy build. I want to say thanks to my wood working mentor who helped me with this build. Let us know what you think about the build in the comments below. Link to the products we used can be found down below. They are Amazon Affiliate Links. So, if you feel like supporting us, feel free to purchase a new tool or product for your shop and help us out as well. Our finished products can be viewed at jkwwoodworks.com. Thanks for watching.
Links:
Japanese Hand Saw: amzn.to/3RBZ726
Titebond 3 Wood Glue: amzn.to/40Ytz8d
Watco Danish Oil: amzn.to/49b76cj
Ryobi 18v Orbital Sander: amzn.to/431cLiI
Skil Router Table Combo: amzn.to/3P8uCzk
Ryobi Jobsite Table Saw: amzn.to/3nGo0gh
JKW Wood Works Etsy Store: www.etsy.com/shop/JKWWoodWorks
Please Like and Subscribe to help us share our content. We are a small channel that enjoy producing great looking products that will last a life time. We like to use scrap wood to reduce waste of material. It makes it more challenging since we have boards of different sizes and thicknesses. However, this gives us a great feeling knowing that we are giving pieces of wood a second life that otherwise would have been discarded. Visit our website to see our other fun projects and great ideas.
Please let us know what you think about the video in the comments below. We are always trying to improve and appreciate your constructive criticism.
Website: jkwwoodworks.com
Partner Website: webbcraftinggallery.com
Visit our Etsy shop, Facebook page, and Twitter as well.
Plans for our builds can be found on our website or through Etsy.
Also, if you like guns and outdoors stuff, check out Peep Sight! That is our other RUclips channel.
Music Thanks to RUclips Studio

[@michaelsweet8327]

Beautiful work! Question, why do you cut the mallet part in half then glue it back together? Does that make it stronger? Thanks!!

[@jkwwoodworks]

Thanks for reaching out and watching! The reason I cut the mallet part in half and glued them together was to get a thicker and wider board length. The stock that i had was not wide, and the mallet portion would be narrow. By cutting and gluing the way I did, I was able to control the thickness of the mallet itself. I would guess that it does not make it stronger.

[@michaelsweet8327]

@@jkwwoodworks Thanks! Just watched it again, now I see what you did. That'll work!!

[@jkwwoodworks]

@michaelsweet8327 no problem. Hopefully this will help you create your own. It is a fun project that takes some time and effort. But it is well worth it in the end.