Extreme Resin Stacking 3D Prints - This is wild!
HTML-код
- Опубликовано: 29 янв 2022
- I think I've gone too far. This might be the coolest & dumbest thing that I've ever attempted to Resin 3D Print. Crystal Dragons using Resin Stacking
Thanks to Elegoo for Sponsoring today's video ➜
Elegoo Saturn ➜ geni.us/ABTdtjm
Elegoo Mars 3 ➜ amzn.to/3CQqkTN
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
Thanks again to @3DPrintedProps for stopping by!
3dprintedprops.com/
MY PATREON / My Resin 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
resinlapse.bigcartel.com/prod...
Wham Bam Slap mats save 15% with code UJ2021 ➜ whambam3d.com/collections/acc...
Crystal Dragon by Cinderwing3D
cults3d.com/en/3d-model/art/c...
Eastman's 89 Batman ➜
/ eastman
Doses3D Joker Bust ➜
/ doses3d
Tiktok
/ unclejessy4real
/ filamentstories
/ pinklumenade
/ grizzlednome
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhackers.com/store/l...
Epax X10 ➜
epax3d.com/products/epax-E10?...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com/shop/unclejessy
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachines3d.com/?rfsn=...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
RUclips ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #Resin #UncleJessy 
Наука
If you're brave enough to attempt this for yourself you can find Cinderwing3D's files over on Cults3D cults3d.com/en/3d-model/art/crystal-dragon-articulating-flexi-wiggle-pet-print-in-place-fantasy
Wow!! Thank you SO much for trying our Crystal Dragon! I really appreciate it! I want to also give a shout-out to Online Handle "Red Syns" for the amazing work in turning our original Crystal Dragon into an incredible coiled resin print! :) Thank you!
@@cinderwing3d seriously amazing job on this one!
@@cinderwing3d Can you add one that's not so long? Maybe stops at the second row?
I’ll take that support tree that failed. It looks dope
@@cinderwing3d So where is the super long stacked file? Is it included in the regular download when we buy the Crystal Dragon? Or is it a different download/purchase??
Very impressive! This could make jewelry casting much more efficient. Can you imagine how many rings you could print in castable resin using that technique? Thank you for sharing!
Welp, I now have that in my todo project notes!
@@b8264d im Tempted to attempt the dragon on mine
@@stuartmurphy5138 I would love to see the video if you do decide to do it.
Who would you take the resin casts to so you can make jewelry? I was actually trying to find how to start making jewelry with 3d prints, I'm in San Antonio
@@mykel4661 I’ve been wondering about that since I posted my comment. I forgot to take in the size of the final print. It would probably be to big for the typical home forge.
Really cool prints, kinda hurts knowing how much resin gets wasted on the supports though.
That would make an interesting tree garland for Christmas, especially for a theme tree.
For you struggle on removing support without dipping them in warm water, what i do is soak them in room temperature water a few minutes or longer depending of the thickness. Works well on water washable resin before curing. The resin is not brille, still a bit flew and soft, cold/room temp water dont alter the print and i get less support mark then after curing or warping with warm water.
I didn't use the water washable resins. Can you recommend the good ones?
@@adamswitlak1242 eryone grey if you can get it, thats the best one in water washable
@@adamswitlak1242 I have been using JAYO water washable, its my favourite resin in general
Brilliant use of resin stacking. I love the red resin dragon.
these are just incredible! 👏😎
Thanks homie!
All the good 3D printing RUclipsr congregate in this comment section
Can I have the file for the long dragon pls
Love it! What a great video on resin stacking and of course amazing results with the dragons!
Glad to see my mod being showcased! Super exciting as a newcomer to the hobby!
These are pretty nuts! Very impressed with how well they printed
Wow, you have those printers dialed in! 11 hours still seems super fast for a full build volume print. I am used to my mk3s but just got my mini 8k. First resin printer. Will need to print that serpent
I would love to see them make versions for the Saturn and Jupiter to save on resin and im thrilled you printed it on both.
That resin is really beautiful- love the color
Dude... this is crazy cool! Congrats on the successful super print!
Honestly i think the red dragon would look amazing inside a resin table with backgrounds and everything inside
This is so cool! Really enjoy your videos and also ordered myself a Jupiter a couple of days ago. Thanks for the awesome info and the tips
I'd be interested in seeing this printed in a flexible rubber-like resin as this method of printing would make for some really cool fashion accessories like belts and scarves.
Those red supports remind me a bit of the castings people do of ant hills. Super cool structure! And great job on the prints and timelapses, those dragons are so cool.
That is awesome! Made me think about printing a whip prop!
So freaking cool, man! Could you cover making flexible stamps, like rubber ones, and hard ones for leather in both resin and FDM?
He' s killed it with this model since you put it on your channel it went around faster than a new strain of covid.
Omg! That was insane! Love it!
When I saw.that I never thought you'd get it all separated. Awesome video as always. Great getting to hang out. It's been a while my friend. 😀
Amazing! A great model and this makes me want my Jupiter NOW!!!
OMG ITS THE LONGEST BOI. I even opened yt for this and I don’t even mad I love it
Hey Im a long time fan! that looks Amazing!
Amazing build 🤠 gonna have to try it
That red is amazing. I love it. I need it.
Och man! You are a crazy person! Nice prints! :D
Definitely going to do this!!
Being the like that made it 1k feels great. Love your content, you deserve more likes! ❤️
So excited for my jupiter this year!!
Awesome job bro 🤘
Bought and attempting the print!! I have the other flex dragon resing printed in a little one and a bigger one off my saturn
What an insane print. I think that is the longest 3d print I've ever seen!
That's amazing!
Could you print a long FDM version on the CR-30? That would be pretty cool to see.
I tried to print this and it turned out great except for the very top of the head didn't print. When I took off the supports, I ended up breaking it in 3 places. I would have loved to see more detail on how your removed the supports.
I had the same problem, I broke 5 links in the figure, I don't know how to take off the supports without braking the links of the dragon
The last like 10 links in the tail end up fused for me even at dangerously low exposure times
That is the coolest eyelash!
Super excited for this one. Would love to see it on the Jupiter!
Edited… nm I see you did!
Very nice, thank you.
Love ur vids keep it up
cant wait to see them custom painted lol
Wild af
Got something on your eye lash, I dont know how it’s not driving you crazy! Awesome print!
Almost 2kg of resin! Woah! Also, for support removal, a cheapo harbor freight heat gun set to medium works just like the hot water trick 😉
5:55 You held a life stream of a 3D print? Honestly, in my entire life I have not heard of anything that came so close to watching proverbial paint dry.
awesome! And with that support-nipping bit I think you invented ASMR Nightcore 😯
Can't wait to dip my hands in to the resin printing hobby!
Wear gloves !!!! 😆
Oh no don't do that resin Is toxic ! ... wear gloves first
Those bare support structures look like the Crystalline Entity from Star Trek!
You can turn the red supports into a little roller coaster. Just add some rails and a cart.
In my first year studying Architecture, we created such complex 3D models from what was initially a project of lines, that just one person (consider that i'm in a huge city with a lot of options) accepted the task of printing our models.
Even with this person hability, there was some models that had to be simplified.
I kind of want to make one of these in a translucent resin and figure out how to wire small LEDs into the segments without destroying them.
I was thinking about something like this sold or distributed as a pack. For example if you made a big LOTR model (maybe Smaug or Gandalf) and had all the rings set in the support material for the main model. It's going to take the time and goo to make the main model and supports anyway.
Amazing videos.
Can you please tell me how you loosened the segments? Because I have a slug with a stiff joint segment and would love to fix it.
Great videos. 👍
wow.the supports are stiff and the snakes are elastic. interesting stuff.
Very cool. Make a blue one same size as the red. Then wrap around arm. Red arm dragon and Blue arm dragon
that thing on his eye making me feel like austin powers in goldmember "moley moley" can't focus on the video hahaha
Lotta "That's what she said!" moments in this one :D
Hope your eye is OK Jesse 🤞
I would love to do this but I’m broke, I find these things super interesting! 😂
I really want to try and print this to go over my double monitor setup
Failed??? That's a MASTERPIECE🤩
I saw there's a "spacer" or something for the anycubic Sovol flex plate, that you can print? Is there anything you need to do to attach flex plates? Or just zero the machine with the plate on?
What if we want the smaller dragon, but at a decent size? Could you request a 'stacked' version of that one so we can have a larger one?
How are people designing the print stacking? Is it modelled directly as part of the STL or is it some add on feature for the slicer?
If you're doing miniature figures you could teselate them so long as you can find or make a couple of attachment points on the top of the inverted figures.
I'm running into the same issue on my attempt to print this on the Photon. I had to drop the model down .2 mm to make it on the build plate.
5:13 I heard that stealth Bababooey reference! :P
Which Flexplate do you use for the Mars 3? So far I was not able to find one, which is recommended or marked as compatible. Or is yours simply smaller and you have to adjust your settings in your Slicer?
I purchased his dragon models to print and I cant wait to try to 3d print this one.
I want to get some more colored resin to try it though as I mostly just have grey and I want it to look better without having to paint it. What colored resin I do have would not be enough for one print.
Although if I mix it with other colors as it runs out that may look cool. I have red, green, and blue elegoo water washable resin. Maybe I will try that. :P
it's almost unbelievable printing maybe I'd like to come up with some automatic additions for even smaller printers
Would love to see you review the Anycubic M3 Max vs Jupiter
G'day Jessie
I've an Anycubic Photon Mono resin printer with a build volume of 160x80x65.
When I do multiple different files, I use fusion 360 and make a frame around different files in the volume of 155x79x64mm. I connect all the files by a 0.5 tubes to each other and to the frame.
I export this file as a whole job and place it in my slicer. I then make a 1.5mm bed on the plate and add supports where needed.
With my wham bam plate and the supports the height is 160mm.
The print takes about 7 hours, but it's faster than the combined time print time if you print them separately. Also you use about 50% less supports compared to single prints
to the plate, thus less supports are needed.
Also the clean up is quicker and easier.
Havagooday
Greg
I have a Voxelab Proxima 6.0 that I just repaired for a customer that I'm going to try this print on. I have the standard articulated dragon that I printed, but I want to print a bigger and longer one.
Any suggestions on the settings to make this come out working? I’ve tried and it ends up snapping in places. Thoughts?
Hey Uncle Jessy, I have terrible warping in my resin prints, i would love to see a video on tips to reduce or prevent this from happening. If youve already done something similar could you point me in the direction of the video? Thanks my man!
Tip: when not using a flex plate, put some IPA in spray bottle and spray the IPA on the scrapper, when the IPA get in between the resin and bed the resin part will pop off the plate.
Miss opportunity on the Sesame Street Count Dracula laugh as you was counting feet!
would wrap that thing around the tree at Christmas time lol
You're crazy busting apart supports without safety glasses! (cool vid tho!)
does it help to put it in the cure machine and get the print plate of after it's a bit harder?
Question for ya! I'm recently an owner of two Elegoo Mars 2P. I'm looking to eventually get a large format 3D printer for helmets/masks and large figures.
Are the Saturn or Jupiter good buys or are there better options out there?
Cannot wait to get my jupiter and try this! Definitely making an 11ft long dragon!!! 😅 sorry, not sorry
You should take the blue coil dragon and put it in the red dragon supports
I feel like you could turn the red support structure into some kind of marble run.
Seeing this I need slightly clear colored resin for just looks and normal grey resin for painting
Hey Uncle Jessy when you say your support settings and stuff like that is on your Patreon, does that mean for each printer. Sorry pretty new to this stuff. I have a photon mono and a photon x 6k on the way. Would I be able to get your settings for each of those machines or am I misunderstanding what your saying. Thanks for the great videos, your the reason I bought my very first printer and I've been loving every second of it .......thank you sir.
Do they have one that stacks several of the shorter dragons so you could print multiple dragons at once?
Say Uncle Jessy, did they come out with the Elegoo Saturn 6k? If so, did you cover a review on this?
So the stacking supports is that in the paid version of chitubox? Or is this possible if u stack objects above each other will auto supports recognize this? Or do you have to manually put supports in when stacking
Well, you have new some Christmas ornaments. 😳
What flex plate do you have for the saturn? Thanks!
Yes
awesome video! if you don't mind me asking though, how are you not bothered by the resin smell and fumes? i see that you are actually able to work with raw uncured resin without any kind of respirator
also, are the kind of resin you use nontoxic or something?
This is unfortunately a case of not caring. The mask they do wear at one point of the video also don't protect them. What might be more concerning is the fact that they also don't have any ventilation.
I’m knew to this. Having problems trying to get a good print. I have the elegoo and the Creality halot. My prints aren’t sticking.
So for the red support you could make some flexible like train tracks and maks a rollercoaster thing
Pretty crazy print!
Do the pre-supported files also work on FDM printers?
No. Different method of printing. Slicer software is different
I'm just here for the dragons. I love dragons