Was hoping you would do something with the cellophane, as it can cause a holographic effect. I could see it in the sunlight, as well as inside, and the reaction was gorgeous! Adding these opal glitters on the list to get, because I admit it freely, I am a glitter addict, but glitter adds so much depth to a resin piece, it can also be used as a colorant in it's own special way. I need to stop procrastinating on finishing the Ukraine yellow and blue rose I am working on, it's just on the tedious side as I have to do the yellow resin on the edges first, then I can add the blue resin in the center. Will send you an email of the finished project as well as a few of my other pieces I have done.
That sounds like a really pretty project. Can't wait to see it 💙🤗 I know what you mean 100% I'm a glitter addict too. I just bought a bunch of new colors from my friends shop. I love these opal glitters though and you will too. They're so soft and pretty and this set has a bunch of different colors. Thanks for watching 🤗💟🦄 I can't wait to try this some more with different colors 😍
Such a good idea, adding it to the cup first, and then just pouring. I’m definitely gonna do that next because I did it separately and I made such a mess.
@@naptimecreations question for you. I tried your way with the glitter. The first time I did it before not trying your way but my coasters came out sticky maybe because I didn’t mix it well or was off by a couple ounces of one of the mixtures. I then tried it last night measuring carefully, and it didn’t come out sticky, but it’s rough on the top from the glitter. Did I put too much glitter in?
They’re really pretty! My hubby and I just did a table top pour on our nightstands. We used your technique of a base layer of glitter.. only we just added a small amount of holographic mini maple 🍁 leaves and fine holographic red/orange glitter, instead of the larger glitter. Then we used bronze, copper, rose gold, burgundy and vibrant copper mica’s in a marbling effect. Also adding Marabu’s dark reds & glitter alcohol inks, blended it all with the blow dryer.. it had a stronger airflow than my heat gun. We did 4 pours in all, topping it off with a clear layer. They turned out amazing! I couldn’t be happier with them and I’m really hard to please when it comes to my work!😂 I just wanted to tell you thank you for your tutorial! I wouldn’t have thought to add alcohol inks to this technique without you showing me that and that detail really just made it look so great! The maple 🍁 leaves just peek through here and there with a sparkle and the 2 layers on top of them give it a wonderful 3D effect. Thanks again!
Awe that sounds amazing and so pretty. I'm so glad to hear you gave it a try. I bet they're gorgeous. It's such a great technique. I know it has tons of awesome depth too with all the layers you added. What a great idea to do tables, I'll have to try that one of these days. I did a table for my mom a long time ago. Maybe I should take it back and do another layer for her. That technique is perfect for tables 🤩 thank you 🤗💜🌸
@@naptimecreations It was a first time table top for me and my hubby hasn’t ever done resin before this. He did a really great job. If you decide to do more layers on your Moms table I’m sure it’ll turn out great! I learned a couple of pointers from Stone Coat epoxy Utube channel. We used their epoxy because it’s made to be durable for countertops and it good for up to 450 degrees when fully cured. One tip is to create a dam with 4 layers of masking tape around the outer edge, use a vvvvv bottom edge trowel to even out the resin. Let it cure for 2-3 hours then pull the tape off in a downward motion. That gives it a nice edge. Then run your finger around it a few times to even out the drips. I’ll see if I can post a link to that video. Thanks again! We couldn’t have done it without you!
@@funo6581 that's so cool you guys got to work on a project together. Thanks so much for the tips I'll check that video out. On the table I did for my mom I taped the bottom. So I'll definitely give that technique a try. 🌹🤗
that looks so so cute! i imagine actually having one of those as a coaster around my house to be so distracting. i think i would like to just look at it the entire time instead of doing work 😂 the end product looks stunning!
Hi Tish! I just found you this week and I LOVE your videos!! Is there a vid that shows how you finish up pieces after demolding - like any sanding you do, cleaning up edges, etc? These coasters came out soooo sparkly and amazing!
Hi, thank you so much 🤗 I'm so glad you found my channel. I typically don't have to sand My pieces. Sometimes I do have to top coat them. In this video I show step by step how I top coat. The video is a few years old so the quality might not be the best. I did it on my old camera. ruclips.net/video/OtURfhiN9rA/видео.html
@@kenhartman7362 HI Ken, well we don't have to wear mask anymore. So I guess it's under controll. I really don't watch to much TV, it's to much sadness for me. I watch more resin videos than anything.
Im new to Resin and making items. The first ones i made, the "bottom" turned out better than the tops. Is there a reason? Do i need to do anything differently? I jiat used resin with glitter.
That happens sometimes for me to, I always slightly Underfill my molds. Then the next day fill the molds up the rest of the way with clear. That way you can use either side as the "top"
Thank you so much, these actually came from amazon. Here's the link Here are the links. Discount code 10naptime will save you 10% Set of opal glitters 12 colors- www.amazon.com/dp/B08DHVSNLN?maas=maas_adg_60D8305D8F4C23F83241C7543A8D8CAC_afap_abs&ref_=aa_maas&tag=maas
Thank you 🤗 😊 💓 I need to make some more like this soon. They're so pretty in person. I like TotalBoat TableTop epoxy or TotalBoat high performance epoxy with the slow hardner for coasters. The high performance epoxy is a 2 to 1 ratio and it has 3 speeds of hardner you can choose from. Fast, medium and slow. I like the slow. It makes really pretty flower coasters and it's great for pretty much all coaster techniques. Their tabletop epoxy is great too but it's a thicker viscosity so it can have more bubbles. Which isn't too big of a deal as long as you aren't making a lot of projects with clear. Here's the link to them if you want to check them out. Discount code NaptimeTB will save you 10% TableTop- www.totalboat.com/product/tabletop-epoxy/?attribute_pa_size=twogallonkit&gclid=CjwKCAjw9suYBhBIEiwA7iMhNGGiIznPDqAWMi4pOf-mkA2DgMLIWz3yESPihcpq6uLoRgAqRbirWRoClfgQAvD_BwE&gclid=CjwKCAjw9suYBhBIEiwA7iMhNGGiIznPDqAWMi4pOf-mkA2DgMLIWz3yESPihcpq6uLoRgAqRbirWRoClfgQAvD_BwE High performance epoxy- www.totalboat.com/product/high-performance-21-epoxy-kits/
Link to the cellphone off Amazon Iridescent cellophane roll amzn.to/3NyU2Tf As An amazon associate I earn from qualifying purchases at no additional cost to you * Holographic molds website juliart-studio.com/collections/holo-molds/products/4-5-inch-holo-rose-coaster-silicone-mold-for-resin
Hi Tish, I was trying to connect you to have our brands work together, would you please check your email box? I guess it might end up in your spam folder lol...thanks!
@@intoresin Hi, I just saw the email it went to my spam folder. I am unable to collaborate right now. I will email you if I can in the future. Thanks for the offer.
WOW a these are so gorgeous !!! I love ❤️ the glitter colors & using cellophane with them makes for a stunning coaster. Thank you for all you do.
Thank you ✨️😊 these are so pretty and fun to make. I need to make some more like this soon. Thanks for watching 💗💗💗
Beautiful Tish ❤️ ❤️ Thanks for sharing!
Thanks Doris 🤗🤗🤗🌸🌸
They are really beautiful. I actually like the back the most. The cellophane adds a texture layer look to the coaster.
Thank you 🤗 I like the back too. These glitters are so pretty. Thanks for watching 🤗
So very pretty snd glittery!
Thanks Lisa 🤗🤗💟🌹🌹🌹🌹
So, so pretty!
Thank you 🌷🌷🌷💙💙
Was hoping you would do something with the cellophane, as it can cause a holographic effect. I could see it in the sunlight, as well as inside, and the reaction was gorgeous! Adding these opal glitters on the list to get, because I admit it freely, I am a glitter addict, but glitter adds so much depth to a resin piece, it can also be used as a colorant in it's own special way. I need to stop procrastinating on finishing the Ukraine yellow and blue rose I am working on, it's just on the tedious side as I have to do the yellow resin on the edges first, then I can add the blue resin in the center. Will send you an email of the finished project as well as a few of my other pieces I have done.
That sounds like a really pretty project. Can't wait to see it 💙🤗 I know what you mean 100% I'm a glitter addict too. I just bought a bunch of new colors from my friends shop. I love these opal glitters though and you will too. They're so soft and pretty and this set has a bunch of different colors. Thanks for watching 🤗💟🦄
I can't wait to try this some more with different colors 😍
Such a good idea, adding it to the cup first, and then just pouring. I’m definitely gonna do that next because I did it separately and I made such a mess.
Thank you 🌷 most definitely try it this way, it can be so messy sometimes. I make a mess sometimes too 😅😊 thanks for watching
@@naptimecreations question for you. I tried your way with the glitter. The first time I did it before not trying your way but my coasters came out sticky maybe because I didn’t mix it well or was off by a couple ounces of one of the mixtures. I then tried it last night measuring carefully, and it didn’t come out sticky, but it’s rough on the top from the glitter. Did I put too much glitter in?
Oh, these are beautiful!! Thank you!
Thank you 🤗 💗 I can't wait to make some more soon with different colors
so gorgeous, such sparkle
Thank you 💜💜💜🤗🤗
Wow. Just wow!
Thank you 🤗
Those are so pretty 💗
Thank you 🌸💗🦄🤗
@@naptimecreations 🌸🌺
Love these, so mesmerizing & beautiful, gorgeous colors!!! 💞🙏😲😃👍👏👏👏 Thanks for sharing Tish!
Pam J, good evening how are you doing, how's the pandemic situation over there in your country?
Thanks so much Pam, I can't wait to try again with some more colors. Thanks for watching 🌸💜🤗
So so pretty 😍 💓 💗 💖
Thank you 🤗💜💜🤗🤗
😍😍 they're so pretty!
Awe thank you so very much and thanks for watching 🌹
these are so gorgeous!!!!
Thank you so much 🌸🤗🌸💜
Yes yes yes, the video I've been waiting for 😍😍😍
Thank you 🤗🤗🦄🦄💜💜💜💜
They’re beautiful
Thank you 🤗🌸 I can't wait to make some more with different colors
Pretty😍😍 I like it so beautiful😍😍❤
Thank you 💜🌸🤗
Beautiful! All I can say!! Totally beautiful!! Thanks Tish! ❤️🙏🏼🌻❤️🙏🏼🌻
Thanks Nancy, I can't wait to try this again with different colors. Thanks for watching 🤗🤗🤗💟💟
I had some holographic goodie bags from one of my kid's bday parties. I use that in a coaster mold. It turned out pretty cool
That's a great idea, I bet they turned out fabulous ❤️🤗🌹
@@naptimecreations I was impressed... hahahaha
@@emilydunham4735 I'm going to have to get some and try it out 💜😁
It really does look like opal...Its absolutely gorgeous...💛💜💛
Thank you 🤗💟 I love how these look. So soft and pretty, thanks for watching
Gorgeous!!!
Thank you 🤗🤗💟💟💟
Woooow ! Gorgeous ! I love these glitters and these coasters are so beautiful ! 🤩🤩🤩
Thank you so much my friend 🤗🤗💜💜🌸🌸🌸
It’s soooo beautiful 🤩🤩🤩🤩
Thank you 🤗
Your welcome 😊
Love them.
Thank you 🤗🤗🤗🤗💟💟
Beautiful!
Thank you 💟💟🤗🤗🤗
So pretty, I am going to try this 😍
Thank you so much 🤗 I hope you give it a try. Lmk how they turn out 💟
Beautiful ✨
Thank you 🤗
I love these!
Thanks Mandy 🤗🌸🦄
Those are gorgeous. ❤️❤️❤️
Thank you 💟💟🤗🤗🤗
Love it!
Thank you 😊 these are so fun and so pretty. Thanks for watching 💖💖💖
They’re really pretty! My hubby and I just did a table top pour on our nightstands. We used your technique of a base layer of glitter.. only we just added a small amount of holographic mini maple 🍁 leaves and fine holographic red/orange glitter, instead of the larger glitter. Then we used bronze, copper, rose gold, burgundy and vibrant copper mica’s in a marbling effect. Also adding Marabu’s dark reds & glitter alcohol inks, blended it all with the blow dryer.. it had a stronger airflow than my heat gun. We did 4 pours in all, topping it off with a clear layer. They turned out amazing! I couldn’t be happier with them and I’m really hard to please when it comes to my work!😂 I just wanted to tell you thank you for your tutorial! I wouldn’t have thought to add alcohol inks to this technique without you showing me that and that detail really just made it look so great! The maple 🍁 leaves just peek through here and there with a sparkle and the 2 layers on top of them give it a wonderful 3D effect. Thanks again!
Awe that sounds amazing and so pretty. I'm so glad to hear you gave it a try. I bet they're gorgeous. It's such a great technique. I know it has tons of awesome depth too with all the layers you added. What a great idea to do tables, I'll have to try that one of these days.
I did a table for my mom a long time ago. Maybe I should take it back and do another layer for her. That technique is perfect for tables 🤩 thank you 🤗💜🌸
@@naptimecreations It was a first time table top for me and my hubby hasn’t ever done resin before this. He did a really great job. If you decide to do more layers on your Moms table I’m sure it’ll turn out great! I learned a couple of pointers from Stone Coat epoxy Utube channel. We used their epoxy because it’s made to be durable for countertops and it good for up to 450 degrees when fully cured. One tip is to create a dam with 4 layers of masking tape around the outer edge, use a vvvvv bottom edge trowel to even out the resin. Let it cure for 2-3 hours then pull the tape off in a downward motion. That gives it a nice edge. Then run your finger around it a few times to even out the drips. I’ll see if I can post a link to that video. Thanks again! We couldn’t have done it without you!
ruclips.net/video/PlMrAfcXexA/видео.html
Here’s that link
@@funo6581 that's so cool you guys got to work on a project together. Thanks so much for the tips I'll check that video out. On the table I did for my mom I taped the bottom. So I'll definitely give that technique a try. 🌹🤗
@@funo6581 thank you 🌹🌹🌹
Ooh these are pretty ✨✨✨
Thank you 🌸🌸🌸😊
I'm just getting into making coasters, and this looks like a simple technique to try out. Can't wait to give it a shot!
Most definitely this is so easy to do and they're 100x prettier in person. I hope you give it a shot. Let me know how they turn out. 💜
Wow! These turned out gorgeous! 🥰💖
Thank you 🌸🤗🌸
Love this & so easy. Well done ❤️
Thank you 🌸🤗🌸
So beautiful!
Thank you 💜💜🤗🤗
Beautiful!! Love all the colors!!
Thank you 🤗🤗🤗💜💜
@@naptimecreations 😁😁
One question. Where is the WOW button? These are amazing!
Awe thank you so much 🤗🌸 & thanks for watching 🤗
that looks so so cute! i imagine actually having one of those as a coaster around my house to be so distracting. i think i would like to just look at it the entire time instead of doing work 😂 the end product looks stunning!
Thank you 🤗 and I know what you mean 100% I'm the same way. I get easily distracted by anything sparkly or shiny 🤩🌸💟
This is so beautiful. Thank you so much.
Thank you 🤗💟 and thanks for watching 🤗
Hi beautiful thx
Hi Tish! I just found you this week and I LOVE your videos!! Is there a vid that shows how you finish up pieces after demolding - like any sanding you do, cleaning up edges, etc? These coasters came out soooo sparkly and amazing!
Hi, thank you so much 🤗 I'm so glad you found my channel.
I typically don't have to sand My pieces. Sometimes I do have to top coat them. In this video I show step by step how I top coat. The video is a few years old so the quality might not be the best. I did it on my old camera.
ruclips.net/video/OtURfhiN9rA/видео.html
@@naptimecreations Awesome, thanks!
@@Kokinosdrakontan311 no problem 😊
They came out beautiful.
Thank you 🤗🤗🌸🌸🌸
Rebecca Moerno, good evening how are you doing, how's the pandemic situation over there in your country?
@@kenhartman7362 HI Ken, well we don't have to wear mask anymore. So I guess it's under controll. I really don't watch to much TV, it's to much sadness for me. I watch more resin videos than anything.
@@rebeccamoerno8356 where are you from, am from Florida State in the US but am currently working here in Syria
@@kenhartman7362 I am in South Texas where it is super hot.
So you can do a paper layer resin let it curate and then add a 2nd layer with glitter resin?
Yes
Im new to Resin and making items. The first ones i made, the "bottom" turned out better than the tops. Is there a reason? Do i need to do anything differently? I jiat used resin with glitter.
That happens sometimes for me to, I always slightly Underfill my molds.
Then the next day fill the molds up the rest of the way with clear.
That way you can use either side as the "top"
These are so pretty. Where do you get your glitter?
Thank you so much, these actually came from amazon. Here's the link
Here are the links. Discount code 10naptime will save you 10%
Set of opal glitters 12 colors- www.amazon.com/dp/B08DHVSNLN?maas=maas_adg_60D8305D8F4C23F83241C7543A8D8CAC_afap_abs&ref_=aa_maas&tag=maas
They're so pretty! Question...what is your preferred resin for coasters? I'm needing to order more soon.
Thank you 🤗 😊 💓 I need to make some more like this soon. They're so pretty in person.
I like TotalBoat TableTop epoxy or TotalBoat high performance epoxy with the slow hardner for coasters.
The high performance epoxy is a 2 to 1 ratio and it has 3 speeds of hardner you can choose from. Fast, medium and slow. I like the slow.
It makes really pretty flower coasters and it's great for pretty much all coaster techniques.
Their tabletop epoxy is great too but it's a thicker viscosity so it can have more bubbles. Which isn't too big of a deal as long as you aren't making a lot of projects with clear.
Here's the link to them if you want to check them out. Discount code NaptimeTB will save you 10%
TableTop- www.totalboat.com/product/tabletop-epoxy/?attribute_pa_size=twogallonkit&gclid=CjwKCAjw9suYBhBIEiwA7iMhNGGiIznPDqAWMi4pOf-mkA2DgMLIWz3yESPihcpq6uLoRgAqRbirWRoClfgQAvD_BwE&gclid=CjwKCAjw9suYBhBIEiwA7iMhNGGiIznPDqAWMi4pOf-mkA2DgMLIWz3yESPihcpq6uLoRgAqRbirWRoClfgQAvD_BwE
High performance epoxy- www.totalboat.com/product/high-performance-21-epoxy-kits/
@@naptimecreations thank you so much! I'll try that!
@@vangiefich no problem 🤗
Where do you find your holographic molds and cellophane? I am having trouble finding them online.
Link to the cellphone off Amazon
Iridescent cellophane roll
amzn.to/3NyU2Tf
As An amazon associate I earn from qualifying purchases at no additional cost to you *
Holographic molds website
juliart-studio.com/collections/holo-molds/products/4-5-inch-holo-rose-coaster-silicone-mold-for-resin
What besides cellophane can be used?
Vinyl, foil, plastic wrap. The cellophane is what gives it the color though
What colora did you use? Its hard to see.
Opal pink, opal white, opal blue and opal purple glitter from LET'S RESIN discount code NAPTIME
💕😭
💟💟💟💟💟💟💟💟
I would like to see them with the cellophane and no glitter
That's a fun idea, ill have to give it a try. Thanks for watching 🤗💜
Hi Tish, I was trying to connect you to have our brands work together, would you please check your email box? I guess it might end up in your spam folder lol...thanks!
Thanks, I will check. I didn't see anything this morning I will check my spam.
@@naptimecreations Sure! Look forward to hearing from you.
@@naptimecreations Tish, may I ask if you check your spam? You can try to check the sender from IntoResin. Thanks!
@@intoresin Hi, I just saw the email it went to my spam folder. I am unable to collaborate right now. I will email you if I can in the future. Thanks for the offer.