Huge apologies for the clickbait title. obviously im not AJ's tech and this is not an Adam Jones rundown of his actual gear. This is a rundown of my gear replicating what he is currently using! no VH4 on this video! so stay tuned for that. again i apologize for those thinking that this is Adam's actual rig.
and i dont do it for subscribers, i do it so its easier for people to find it, specially those who are really interested in the topic and have questions, as you can see i uploaded the video the day Justin's Rig Rundown came out knowing that people would ask about Adam's
I love how you opened the video with the line 6 😂 I thought you were gonna say that’s how you get your tone haha. Great video and awesome rig. Jealous! 👍👍👍
This is gold. Please do more videos on song parts and which effects he uses for the parts. F amazing. Also can u share the synt settings ….i dont have that same synth. But have a moog sub 37. I almost have all the pedals…..from your video. Good stuff.
sorry if i missed it but what volume pedal is that you're using? it's a little hard to understand which of their pedals is a mono as well as passive (i think that's the spec correct me if i'm wrong) excellent video by the way that is for making this
@@antonioppk_643 if you don't mind, one more question - if you *were* to add a Diezel VH4:2 (or similar pedal) to this rig, how would you configure it? i have had one for a long time and have been placing it at different places in the signal chain i am currently working with a new setup to experiment with the gain gates, as follows: - 2xpsm --> MXR micro amp --> DD3 --> wah (don't have the volume pedal yet) --> back to psm --> Diezel VH4 : 2 --> MXR dyna comp for uniformity of the signal sending that to the clean channel of a Marshall mg 30 dfx (don't judge lol) any advice on how to set up the Diezel? and again just can't overstate what an epic addition this video is to an already epic compilation ; thank you for making these
I do have a question when using a 535q and trying to get closer to AJ’s tone. Boost, on I got that. My way selector range has 5 positions and it says counter clockwise wise for high and clockwise for low. Then I have both a volume dial and variable q dial do you have a starting point for those dials as well? Please and thank you. Great video.
boost is always on yes! and the big knob on the side has to be turned all the way on, the litte two black ones on the side are for you to mess around with because sometimes depending on your set up, the wah can get very pokey if that makes sense, so when you play something while on the toe down position it will sound very screechy. i have the variable q knob turned all the way up and thr volume is have it very low to prevent the screeching noise when the wah is cocked forward.
I still don't understand the chain, it all (the pedals) goes into the clean amp, or into the fx loop? And why does the wah is at the end of the chain instead of the beginning, like is it for tone and useful things or I simply don't understand the chain and for x reason it is at the beginning, I mean, people always say "wah and whammy should be at the beginning of a pedal chain", but for some reason here the delays and modulations are at the beginning? So the full chain is guitar>psm5 send>volume>chorus>delays>flanger>eq>wah>psm5 return>clean amp? Anyways, I dont get the wah at the end of the chain after all delays and mod pedals, it is just a masterpiece chain, love the video man
Curious question, I’ve done research of Boss DD3 and the update DD3T. I purchased the OG DD3 because the DD3T doesnt have the accurate effects like the DD3 because it have the tempo for setting. Have you tried the DD3T?
Any way u can post the chorus ce5 settings cant find it anywhere. Also his guitar has .047 capacitors …u think that makes a big difference on his mid range tone?
Cool thanks wondered for a long time. That's sick. Gonna have to go bf2 then because you rig sounds super good. Also any keywords to search for micro amp cover? Can't find anything so far
Killer video man. 2 questions. What do you use to power the FX40b since it has like a 1/8” power input. Also, Could you make a video on the pedalboard it self. Or have your friend help you. I feel like that would be huge for the community of Adam Jones fans to have a “how to” video to make your own board.
for the FX40B the i use the 1/8 adapter. and for the board itself it would be hard since i didnt build it, Jack Nicholson (Jon) built it for me and he has instagram posts on how to. of if youre part of the Adam Jones Guitar Collectors group on facebook you can see how its made!:)
Do you know what mesa settings he was running back in the lateralus days when he was combining it with the blue VH4 and Plexi? Also does he run greenbacks in the Marshall cab? You seem to know your stuff my bro.
I think for the wah to be cranked you have to turn the knob towards you, or counter clockwise. The way you have it set up is on the lowest position. See the underside of the pedal "WAH range selector: CLOCKWISE: Low - COUNTER CLOCKWISE: High"
i have it completely cranked. did i say it was the other way around in the video??? 😭 cause if i did i messed up haha it is supposed to be cranked! send me the time stamp so i can edit it pleases
@@antonioppk_643 Yea you're rolling the knob forward in the video and saying that is the cranked position. See 09:45 So for it to be cranked you wanna roll it towards you, or counter clockwise. If in doubt check the underside of your pedal. You also made the mistake in the 2021 video @ 06:45 and the 2022 @ 10:28 This is not meant as a diss my man, just helping out because your videos definitely helped me out!
Hi @@antonioppk_643 and @maertnz, I actually scored a Crybaby 535 (not Q!) recently, and after taking the bottom panel off for cleaning/re-greasing, I totally forgot to mark where the Potentiometer should start/stop. Do you happen to know, or perhaps have a sound sample that I can use as a guide? Thanks in advance for any help!
the challenge is how expensive of a rig that Adam Jones uses as well as his advanced level of guitar playing to match the tone. BUT I get really close using HX Stomp modeler.
Thanks very nice. Does he use the Virus on Vicarious? Can you talk more about that/give sound examples? I had no idea and I’m clearly deaf not hearing it. Thanks!
Thank you for this video. I primarily use MXR pedals and this video helped me dial in the flanger a little more and the wah which I was way off I did nt want to go out and buy a bunch of boss pedals just for tool stuff so this helped me get pretty close while keeping what I have
@@antonioppk_643 Mostly evh stuff so phaser, flanger, chorus, carbon copy, reverb, tremolo 6 band eq. I have Dunlop stuff too being the volume and 535q, as well as the analog chorus but I mainly use the evh chorus now.
Brilliant love how you integrate the Virus with the amp. I love my Virus and need to try that out with my HX Stomp using blend of VH4, Uberschall and Dual Rectifier models. Definitely less expensive than buying all the gear that Adam Jones uses.
Hey man, first person ive seen that actually shows pedal settings. But what is the order i only have limited pedals 1st -crybaby jerry Cantrell wah,/ 2nd- distortion Fender 3rd-Polychrome flang (walrus) 4th-delay DD8, 5th rv-6 reverb. 6th is a loop RC-1 I have MXR 10 band EQ, AS well AND would like to know what setting for them (example ) 1k 2k 4k 8k 16k also.
try this order RC-1, DD8, RV6, Walrus, EQ, and last Wah... as for the EQ you just have to turn the highs up to where you can hear the guitar feedback when its on, and the level up
Can you explain to me the relationship between and the necessity of the three heads? Marshall, dual rec, vh4? That to me is the most interesting thing adam does. You can achieve that sound with any one of those amps. Your only using the dual rec here right? Is it that the superbass excels at lows, dual rec the mids, and diesel the highs?
im using both there, and the superbass or superlead, is for the cleaner tones and i try to back off the bass since its pretty bassy, the DR is a bit more compressed and has more saturation on the distortion, makes it sound dark. the VH4 is for the tightness and punchyness and has a bit more gain
not that much but it does need a slight boost. im not sure why he has it now if the Volume pedals he has been using are all active and have gain knobs on them that he can adjust.
at the time it was too much money for me, and even now it is, i know its worth every penny but i will eventually get one, its all i need and an original silverburst, im in no hurry at the moment because im happy with my tone and also the epiphone i use. i will eventually get them though!
Man, you should do tutorials on how to play the songs with pedals included ! Guys like axe of creation teach good stuff on how to play the songs but not the pedal usage in conjunction with the tabs ! Keep up the good work!
I’ve been a guitarist for 25+ years. When people try to explain rig setups/signals/in/out etc to me… I’m absolutely hopeless at absorbing the information. I can run my Helix floor just fine, and it’s not a huge leap to learn other methods of controlling sound I realise, but my brain can’t do it.
@@antonioppk_643 Im referring to the part after "Sun becoming" right after when verses finish. There is a feedback moment right before the open chords, but im not sure if the delay is on there on the chords
Hola Antonio, una pregunta técnica, los psm-5 van alimentados con alguna fuente? O solo con puras pilas 9v porque veo que tiene dos entradas de alimentación, o son salidas, saludos de México, hace tiempo nos hablamos por insta 😂
What kind of Marshall is that? My friends has a ceriatone AJ clone that just nails the sound but I don’t like the aesthetics - the one you have looks legit.
@@antonioppk_643 just make sure the next one you get requires power. That means it has a buffer and shouldn't have the problems you had with the Radial Bigshot.
True, i watched a video of a 70 year old man oiling down a real doll in a camper in summer heat before this, and this is still the creepiest video i've seen.
Hot take - I am not a fan of how Adam's rig is sounding post FI. His tone has always been bassy and aggressive, but lately he's been really losing clarity with his clean and crunch tones. So much bass in his signal that it sometimes muddies up the entire mix. It got really bad whem I saw them live 2 years ago.
I mean this with the utmost respect, I honestly do. I freaking love tool and everything about them. But why in the hell are you building an exact copy of his board? Unless you are in a tool cover band, and have an old LP custom, multiple diezels, and old modded super bass, a million dollar d&b pa or whatever they are using nowadays, and have Adam Jones’ fingers surgically attached to your hands - even if you did that you still wouldn’t sound like him… Take cues from your heroes but be your own thing, come up with and hone your own sound- you are the only you, embrace it!!!!!
It’s a good thing that people do whatever the fuck they want to do with music as opposed to what other people think they should. This isn’t even remotely weird dude. You literally seethe jealousy and it’s beyond childish. People can do exactly what they want. Wild concept.
not at the moment, the epiphone plays great and even better than a studio gibson i had, i still have to get the vh4 so i would rather do that first and then get an original 79 or 81 when prices go down a bit
Huge apologies for the clickbait title. obviously im not AJ's tech and this is not an Adam Jones rundown of his actual gear. This is a rundown of my gear replicating what he is currently using! no VH4 on this video! so stay tuned for that. again i apologize for those thinking that this is Adam's actual rig.
Either way, you're good brother. It all sounds great.. I could listen all day 😂
Then change the title. Your channel is nothing, you don't need to clickbait, it's not going to get you ANY subscribers by doing so.
i did change the title!:)
and i dont do it for subscribers, i do it so its easier for people to find it, specially those who are really interested in the topic and have questions, as you can see i uploaded the video the day Justin's Rig Rundown came out knowing that people would ask about Adam's
I love how you opened the video with the line 6 😂 I thought you were gonna say that’s how you get your tone haha. Great video and awesome rig. Jealous! 👍👍👍
This AND and the video on Justin’s rig dropping in the same day is crazy
It’s been a good ass day 😎 thank you so much Antonio!!
This is gold. Please do more videos on song parts and which effects he uses for the parts. F amazing. Also can u share the synt settings ….i dont have that same synth. But have a moog sub 37. I almost have all the pedals…..from your video. Good stuff.
sorry if i missed it but what volume pedal is that you're using? it's a little hard to understand which of their pedals is a mono as well as passive (i think that's the spec correct me if i'm wrong)
excellent video by the way that is for making this
its a Lehle :) its active
fantastic sir thank you! @@antonioppk_643
@@antonioppk_643 if you don't mind, one more question - if you *were* to add a Diezel VH4:2 (or similar pedal) to this rig, how would you configure it?
i have had one for a long time and have been placing it at different places in the signal chain
i am currently working with a new setup to experiment with the gain gates, as follows:
- 2xpsm
--> MXR micro amp
--> DD3
--> wah (don't have the volume pedal yet)
--> back to psm
--> Diezel VH4 : 2
--> MXR dyna comp for uniformity of the signal
sending that to the clean channel of a Marshall mg 30 dfx (don't judge lol)
any advice on how to set up the Diezel?
and again just can't overstate what an epic addition this video is to an already epic compilation ; thank you for making these
I do have a question when using a 535q and trying to get closer to AJ’s tone. Boost, on I got that. My way selector range has 5 positions and it says counter clockwise wise for high and clockwise for low. Then I have both a volume dial and variable q dial do you have a starting point for those dials as well? Please and thank you. Great video.
boost is always on yes! and the big knob on the side has to be turned all the way on, the litte two black ones on the side are for you to mess around with because sometimes depending on your set up, the wah can get very pokey if that makes sense, so when you play something while on the toe down position it will sound very screechy. i have the variable q knob turned all the way up and thr volume is have it very low to prevent the screeching noise when the wah is cocked forward.
Such a great video and great sound. Really appreciate you putting this updated version together for all of us.
Maybe I missed this part but do you run all the delays and fx in the effects loop of the Mesa ? Or are they running up front?
everything is on the front! and i am using the splitter now for both amps!
You've nailed Adams tone. Love all the vids!
I still don't understand the chain, it all (the pedals) goes into the clean amp, or into the fx loop? And why does the wah is at the end of the chain instead of the beginning, like is it for tone and useful things or I simply don't understand the chain and for x reason it is at the beginning, I mean, people always say "wah and whammy should be at the beginning of a pedal chain", but for some reason here the delays and modulations are at the beginning? So the full chain is guitar>psm5 send>volume>chorus>delays>flanger>eq>wah>psm5 return>clean amp? Anyways, I dont get the wah at the end of the chain after all delays and mod pedals, it is just a masterpiece chain, love the video man
Such a great and helpful video! What brand pedalboard is that or is it custom made? Thanks for all the information, love your channel.
Curious question, I’ve done research of Boss DD3 and the update DD3T. I purchased the OG DD3 because the DD3T doesnt have the accurate effects like the DD3 because it have the tempo for setting. Have you tried the DD3T?
i have not, the people i know that have the dd3t have said its close though!
sweet vid. loving the neck pickup cover removed on the vob. on the 535q, would it also be the 4th setting? cranked up both dials and boost on?
yes!:) everything cranked on the q knob but the volume knobs on the sides are just half way
Awesome job explaining the PSM5 loops. Wish this video existed before i set my own up lol
how did u program the carbon copy with expression pedal? what tempo?
Sick setup/replica! Where did you get the Legrand power strip if you don't mind me asking?
Any way u can post the chorus ce5 settings cant find it anywhere. Also his guitar has .047 capacitors …u think that makes a big difference on his mid range tone?
i dont know his ce-5 settings :( he did use it during the recording of 10k days but not sure on the settings
What is the post at the top left corner of the board for? Always wondered, also I'll take it you like the bf2 better than the bf3?
its for the guitar slide!:) and the bf2 is my favorite'
Cool thanks wondered for a long time. That's sick. Gonna have to go bf2 then because you rig sounds super good. Also any keywords to search for micro amp cover? Can't find anything so far
Were you using the diesel vh4 pedal on this video? Or was that all just the mesa boogie?
@@SilverburstSH-6 Mesa and Ceriatone
Ok thanks that rig is so sick🤘
Killer video man. 2 questions. What do you use to power the FX40b since it has like a 1/8” power input. Also, Could you make a video on the pedalboard it self. Or have your friend help you. I feel like that would be huge for the community of Adam Jones fans to have a “how to” video to make your own board.
for the FX40B the i use the 1/8 adapter. and for the board itself it would be hard since i didnt build it, Jack Nicholson (Jon) built it for me and he has instagram posts on how to. of if youre part of the Adam Jones Guitar Collectors group on facebook you can see how its made!:)
Hey man, i really Like your Pedal board could someone tell me what the real board is named where everything Stands on
its custom built!:)
Do you know what mesa settings he was running back in the lateralus days when he was combining it with the blue VH4 and Plexi? Also does he run greenbacks in the Marshall cab? You seem to know your stuff my bro.
im not sure about the mesa settings during that tour but i have the current ones from the last time he used the DR with the Blueface and Marshall
he also uses v30s on the cabs
So every cab is running v30's?@@antonioppk_643
yes!:)
Thanks bud. I'm stuck in digital land but that deffs helps with the tweaking!@@antonioppk_643
I think for the wah to be cranked you have to turn the knob towards you, or counter clockwise. The way you have it set up is on the lowest position.
See the underside of the pedal "WAH range selector: CLOCKWISE: Low - COUNTER CLOCKWISE: High"
i have it completely cranked. did i say it was the other way around in the video??? 😭 cause if i did i messed up haha it is supposed to be cranked! send me the time stamp so i can edit it pleases
@@antonioppk_643 Yea you're rolling the knob forward in the video and saying that is the cranked position. See 09:45 So for it to be cranked you wanna roll it towards you, or counter clockwise. If in doubt check the underside of your pedal.
You also made the mistake in the 2021 video @ 06:45 and the 2022 @ 10:28
This is not meant as a diss my man, just helping out because your videos definitely helped me out!
@Maertnz no man that was my mistake haha, i ment to roll it the other way around so youre right!
Hi @@antonioppk_643 and @maertnz, I actually scored a Crybaby 535 (not Q!) recently, and after taking the bottom panel off for cleaning/re-greasing, I totally forgot to mark where the Potentiometer should start/stop. Do you happen to know, or perhaps have a sound sample that I can use as a guide? Thanks in advance for any help!
the challenge is how expensive of a rig that Adam Jones uses as well as his advanced level of guitar playing to match the tone. BUT I get really close using HX Stomp modeler.
Thanks very nice. Does he use the Virus on Vicarious? Can you talk more about that/give sound examples? I had no idea and I’m clearly deaf not hearing it. Thanks!
only live! in the album version i dont really hear it, if you look up any 2016-17 vicarious video you will see thats how they open
@@antonioppk_643 It actually is on the album too but it's suupperrr subtle. Starts at 5:43
Thanks so much!
@@owenjohnston33 indeed he does!! I do hear it after all, and I have heard it all along, I just didnt realize it until you pointed it out. Cheers!
Thank you for this video. I primarily use MXR pedals and this video helped me dial in the flanger a little more and the wah which I was way off I did nt want to go out and buy a bunch of boss pedals just for tool stuff so this helped me get pretty close while keeping what I have
what MXR pedals do you have??
@@antonioppk_643
Mostly evh stuff so phaser, flanger, chorus, carbon copy, reverb, tremolo 6 band eq. I have Dunlop stuff too being the volume and 535q, as well as the analog chorus but I mainly use the evh chorus now.
Brilliant love how you integrate the Virus with the amp. I love my Virus and need to try that out with my HX Stomp using blend of VH4, Uberschall and Dual Rectifier models. Definitely less expensive than buying all the gear that Adam Jones uses.
Even though you are not the tech or AJ, as you mentioned, it still is cool to see how you replicate the tone. Thanks!
Great video! Where did you get the supplies for the pedal board riser? I’m assuming you built that board?
good friend of ours (Jack Nicholson) built it!
Hey man, first person ive seen that actually shows pedal settings. But what is the order i only have limited pedals
1st -crybaby jerry Cantrell wah,/ 2nd- distortion Fender 3rd-Polychrome flang (walrus) 4th-delay DD8,
5th rv-6 reverb.
6th is a loop RC-1
I have MXR 10 band EQ, AS well AND would like to know what setting for them (example ) 1k 2k 4k 8k 16k also.
try this order
RC-1, DD8, RV6, Walrus, EQ, and last Wah...
as for the EQ you just have to turn the highs up to where you can hear the guitar feedback when its on, and the level up
Awesome rig! I have a question about the laser. What would you recommend getting, as I know you said you wanted to get a different one. Cheers!! 🌀 🤘🏻
one that connects to the voodoo labs or has an on off switch
What about the Boss RV-6 Reverb? He is using one of these now, I want to know what songs he uses it in. You can see it in photos of his current board.
that was 2020. he doesnt use it anymore. aa far as everyone knows he was only testing it out
@@antonioppk_643 oh... can you point to any sections he used it in?
I love ypur work man thank you😊 my tool yone is getting there
Thanks for the video. Why did you ditch the Diezel pedal?
Why did you ditch the Diezel pedal?
i needed money😭
Can you explain to me the relationship between and the necessity of the three heads? Marshall, dual rec, vh4?
That to me is the most interesting thing adam does.
You can achieve that sound with any one of those amps. Your only using the dual rec here right?
Is it that the superbass excels at lows, dual rec the mids, and diesel the highs?
im using both there, and the superbass or superlead, is for the cleaner tones and i try to back off the bass since its pretty bassy, the DR is a bit more compressed and has more saturation on the distortion, makes it sound dark. the VH4 is for the tightness and punchyness and has a bit more gain
Marshall for clean, diezel for dirt and rec for older songs.
Could you please explain what the microamp does? Is the signal-loss of the fx chain compared to bypass thaaat big that it needs to be boosted? Tnx!
not that much but it does need a slight boost. im not sure why he has it now if the Volume pedals he has been using are all active and have gain knobs on them that he can adjust.
Friedman jj good amp voor tool?
do you remember what settings you had for pneuma on the chronodelay?
i do not but if you check the Justin Chancellor right now rundown he talks about it and has the same settings as Adam!
The chrono delay... you said it was in the rack, I want to know what part it is used in a song so I can hear it. Any hints?
its just used for pneuma 113-115 are the delay bpms
@@antonioppk_643 I thought it was a carbon copy in pneuma? Or are they for different sections?
@@chesneytube1 in the studio and live he is using the providence for pneuma. the carbon copy might be for 7empest
Can you inform me of where you got that board from? Really nice board!!
a friend made it for me!:)
I was just wondering why you wouldn't start with the most basic piece of gear. The vh4...
at the time it was too much money for me, and even now it is, i know its worth every penny but i will eventually get one, its all i need and an original silverburst, im in no hurry at the moment because im happy with my tone and also the epiphone i use. i will eventually get them though!
Dude! Excellent, excellent video!!!! You've done your homework! Just saw Tool live, three times, last week....lol. Keep up the good work.
Dumb question but what pedals does he use for that chuggity part for invincible
send a time stamp! if its the one that i think youre talkiing about then its no effects
Man, you should do tutorials on how to play the songs with pedals included !
Guys like axe of creation teach good stuff on how to play the songs but not the pedal usage in conjunction with the tabs !
Keep up the good work!
Awesome vid! Please do a video showing how to setup a cc with the expression pedal (2 different delay settings)
@AntonioPPK What board is it? Did you custom build it?
yes is custom built!
@@antonioppk_643 can you send me dimensions and what you used to build it? Or that would be a great video to make?
I’ve been a guitarist for 25+ years. When people try to explain rig setups/signals/in/out etc to me… I’m absolutely hopeless at absorbing the information. I can run my Helix floor just fine, and it’s not a huge leap to learn other methods of controlling sound I realise, but my brain can’t do it.
I believe that pedal in the beginning is also used on grudge and lateralus
which pedal???
@@antonioppk_643sorry I didn’t know what it was called I think it’s the moog. The one he plays with his feet
he uses it on the grudge, Reflection, Lateralus (end) Rossetta Stoned
@@antonioppk_643 I love the sound of it but I can’t justify getting one… not yet at least
love your vids man, Justin, and Adam same day! Haha keep it up dude!
What are your guitar amp settings?
I could seriously listen to that feedback tone for hours
Does Adam have the delay engaged in the power chords part of Pneuma?
if youre talking about the fast part he has it off, but for the verses the delay is on
@@antonioppk_643 Im referring to the part after "Sun becoming" right after when verses finish. There is a feedback moment right before the open chords, but im not sure if the delay is on there on the chords
ohhh that part! there is no delay
Hola Antonio, una pregunta técnica, los psm-5 van alimentados con alguna fuente? O solo con puras pilas 9v porque veo que tiene dos entradas de alimentación, o son salidas, saludos de México, hace tiempo nos hablamos por insta 😂
esos no usan pilas de 9v. tienen un input de 9v en la parte de atras como los otros pedales de boss!:) saludos!!
Also, I remembered hearing somewhere that the Salival version for Pushit begins with the standard settings on the BF-2 with RATE setting maxed out.
its so interesting how adam puts his wah at the end of the chain. great video as always
Where is that riff at 30:00? Is that tools cover of no quarter?
Salival version of Pushit
The amount of delay pedals explain the delays on albums...
This one was definitely better than the last one. Can you do it again in a Scottish accent please? Thanks!
You are a legend.
What kind of Marshall is that? My friends has a ceriatone AJ clone that just nails the sound but I don’t like the aesthetics - the one you have looks legit.
i took off the ceriatone logo snd put the marshall one on!:)
@@antonioppk_643 oh nice! Yeah it looks great. Any reason in particular why you’re only using the recto now?
i dont have a proper amp splitter :(
@antonioppk_6433 palmer makes a really good splitter. Worth the investment.
@@antonioppk_643 just make sure the next one you get requires power. That means it has a buffer and shouldn't have the problems you had with the Radial Bigshot.
Love it Man! Great Job and rig!
killer rundown dude! i think you nail the tones
Great stuff as always man
I guess today I can into the biggest Adam Jones fan.
Thanks a lot. This is so interesting.
Do you think a friedman jj with jbe channel on will do somehow the job?
ive never used a friedman but ive heard many good things about it, give it a try, post on your channel and i will give it a listen!:)
what pedalboard is that?
Typically I see the wah first from the guitar due to impedance issues. There’s no “right” way I guess. Cool video
which are those patch cables?
the flat ones are EBS
the blue tip ones are Livewire
and then i have Mogami Gold!:)
This. This right here. You’re a legend.
nailed it dude
This is bizarre, and creepy af
how
True, i watched a video of a 70 year old man oiling down a real doll in a camper in summer heat before this, and this is still the creepiest video i've seen.
Do you play guitar?
What volume pedal is that?
Lehle Mono
Excellent…..
You’re absolutely killing it with your playing and tone. 🙌🏼🤘🏼
thank you man!:) its a nice volume pedal, better than the goodrich!
dont delete the old video please
what did the other video have that you missed? i can go over it again!
Thanks, Antonio!
Why so many delays?
different values/settings
Got a link for that laser lol
Hot take - I am not a fan of how Adam's rig is sounding post FI. His tone has always been bassy and aggressive, but lately he's been really losing clarity with his clean and crunch tones. So much bass in his signal that it sometimes muddies up the entire mix. It got really bad whem I saw them live 2 years ago.
for me the BF2 settings are what pisses me off haha
Now you gotta collab with Toolmybass lol
So when you getting a VH4 😁
sometime at the end of the year!:)
who is this speaking making the video?
me
2:07 He's using preset A3 for that
❤
#AwwwYeah
Cold & Ugly
Where's the Diezel? Otherwise very good mate.
coming soon!:)
What the fuck am I watching here?!? This is absolutely absurdly insane
in a good or bad way
I mean this with the utmost respect, I honestly do. I freaking love tool and everything about them. But why in the hell are you building an exact copy of his board? Unless you are in a tool cover band, and have an old LP custom, multiple diezels, and old modded super bass, a million dollar d&b pa or whatever they are using nowadays, and have Adam Jones’ fingers surgically attached to your hands - even if you did that you still wouldn’t sound like him…
Take cues from your heroes but be your own thing, come up with and hone your own sound- you are the only you, embrace it!!!!!
It’s a good thing that people do whatever the fuck they want to do with music as opposed to what other people think they should. This isn’t even remotely weird dude. You literally seethe jealousy and it’s beyond childish.
People can do exactly what they want. Wild concept.
lol
Adam have NEVER used a Line 6. That amp is fucking garbage. Iykyl
How embarrassing to have all that gear and play through an Epiphone hahahaha
why would it be embarrassing?
@@antonioppk_643 can't afford a real guitar?
not at the moment, the epiphone plays great and even better than a studio gibson i had, i still have to get the vh4 so i would rather do that first and then get an original 79 or 81 when prices go down a bit
@@antonioppk_643 Sure. Chinese slave labor crap. Enjoy it. I think it's embarrassing.
you have an original?
Take away this guys delay pedals and he’s a nobody lol. Adam Jobes is such an over rated guitarist.
my delay pedals or adam's??
Oh shit here we go again 🤣