How To: Whirlpool/KitchenAid/Maytag Washer Drive Hub Kit W10528947
HTML-код
- Опубликовано: 3 авг 2024
- How To Replace: Whirlpool/KitchenAid/Maytag Washer Drive Hub Kit W10528947 www.appliancepartspros.com/wh...
Symptoms: the washer is in the spin cycle but the basket is not turning, the washer is making banging noises.
Tools: small flathead screwdriver, 7/16" long socket, long socket wrench extension, socket wrench, two hooks, flathead screwdriver, Phillips screwdriver, putty knife, pliers.
This Whirlpool/KitchenAid/Maytag made Washer Drive Hub Kit replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, Kenmore Washers: 2684908, PS6012095, W10396887, W10528947VP.
Buy the new Washer Drive Hub Kit W10528947 here: www.appliancepartspros.com/wh...
Most orders are delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros - Хобби
Thank for you explain.hello from Venezuela.i am técnico 61old years
You're welcome!
I like the metal revision hub kit. Those plastic ones don't last. They tend to chew up the splines. They've worked well. No disrespect brother. Enjoy your day. This channel provides excellent info.
Thank you. This saved me a lot of grief. Spot on information.
Great video. Got me through the job easily
Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.
It would have been nice to see how the part was damaged which kept it from working.
Its plastic. So, it wore out
Thank you for the video! I was worried the hub was the wrong piece because the pin wouldn't just slide in like other videos showed it did. I was scared to gently use the mallet until you showed you had to force it a bit too!
VIOLA! It's done!!
Glad we were able to help you out. If there is anything we can assist you with in the future please let us know.
Thank you. This really helped. My washer is like new!
You are welcome. Glad we were able to help you out. If there is anything we can help you with in the future please let us know.
Very Good!... #5 ✝ {11-20-2022}
Just had a question could not get the clip Al the way in the hub. Does it make a difference?
Thanks for the video. Does the hub need to be oriented a certain way for the retainer clip to slide in? I would think that there are cut outs on the spline shaft for the clip to slip through.
As long as it is aligned with the screwholes, the retainer should slide in.
Well mine didn't and now it's stuck after hammering it and it won't go any further nor come out without breaking 😢
@@barrettbarnyard1959 I had to purchased a second one and I used a wire brush to clean the scale and crud off the spline/shaft. It’s been working fine for the last month.
@@barrettbarnyard1959 if you are trying to pry it back off and the basket spins, try sitting on the washer and put your feet inside and use your feet to keep it from rotating.
Aw nuts what if you don’t have a long wrench? Any suggestions?
Pretty much need to get yourself an extension to get the socket down through the agitator. I don't think the job is possible without it.
Harbor freight has a great selection of inexpensive tools.
I'm glad my model is much easier than that.
So I got the little slide piece out, got the screws out but the drive hub won't come off over the center piece. The machine in the video is not the exact machine I have, which is wtw5000dw1. Help, how do I get that peice off? **I'm trying to get the tub out to clean it
Can I email someone photos of this peice?
You can send the photos to tracyb@appliancepartspros.com
Could this be why the washer won’t spin during rinse cycle?
Check you shift actuator, make sure it’s shifting the transmission first. It’s like $20 on Amazon if not
My current hub looks burnt on the inside... plus I can't get the tub out ...
Did it ever come out? I’m also having trouble
Can’t get the tub out…. The final piece. Help 😢
SAME
Is the hub supposed to be flush with bottom of washer? My new hub has a gap from the hub to the tub
There shouldn't be a gap. Are you sure you installed everything correctly?
Yeah I ordered the correct hub and when I checked there is a gap there. It won’t go down any further
What if the gear is all rusted
Also my issue, I can’t get the new gear on. I’m scared to brute force it since it’s just plastic
Who tf design all these washer and giving us problems like this
Crappy engineers. We've had to replace this part on a so called Maytag "Commercial Technology" washer 4 times and there's only 2 people using it. It's not overloaded. I'll never buy another one.
I’m never buying a Maytag washing machine ever! Replaced hub and springs in less than 3 months in the only one using it!
Can't get the dang lid thing off
Will this cause the washer to leak a little water?
What is going on with your washer? What is the model number of your washer?
Is there a video of the recalibration instructions? I don't have the paper instructions anymore.
Unfortunately, we don't have a video showing that. If you can provide your model number we can look to see if we have the tech sheet with those instructions.
@@appliancepartspros maytag mvwc465hw1
Thank you! We do have the tech sheet for that model. We will be happy to email that to you if you can provide your email.
What's that arrow indicating
What arrow are you referring to?
Of course, he pulls the bottom of it up with hooks like it's easy. I'm over here 270 pounds. Pulling and I cannot get it to come off
Were you able to get the part removed? Is there anything we can help you with?
@@appliancepartspros after removing the bolt i could not get the plate off
@@jacobhaugk5908 watch more youtube videos, or get creative, or bulk up to 320 pounds and try again. I'm 160 pounds and used my brain to get er done👍
Mine is completely rusted, old gear was loose and just popped off, the new one will not fit no matter what I do.
I scrubbed it with a wire brush and cleaned off a crazy amount of rust but it’s not even close to fitting :/
Yo, where's Matt??
Matt is back.😀
@@rodneysexton1034 And ready to attack 💥
That stupid fork is stuck and it doesn't hammer in like its suppose to
I do apologize but what do you mean? Is there something we can help you with?
maytag is trash, good thing theres videos like this to help explain how to make their crappy appliances work
If there is anything we can help you with in the future please let us know.