Had error codes F7E4, F7E3 and F6E3 all were resolved by replacing this same part. That screw on the bottom and the thing you took off with a knife were the hardest part. Thanks for the guidance!
I have same problem started last night I went found a video on how to run find codes and run diagnostics. The same code plus one more F7E4 came up. Everyone in other videos comments seems to have the same problem we have. I have 5 year warranty so I'm going to see if they can come by and fix it. If not then I'm using this video as reference to fix it myself.
that is exactly what this washer was doing . if anything it poured a few drops of water and then it stopped . are you receiving any codes on the screen?
I had this issue with a different Maytag washer. ended up being a bad capacitor. I’d start checking that component out. now I’m having F7 E4 alarm trying to figure that out…
Had error codes F7E4, F7E3 and F6E3 all were resolved by replacing this same part. That screw on the bottom and the thing you took off with a knife were the hardest part. Thanks for the guidance!
This really helps me out. I have not seen this video until now! I have the same E7F4 code. Thanks for sharing the video.
Glad it helped!
Thank you so much!! Working on mine right now.
@@3omenn3 heck yeah!
I have a maytag model mvw4505mw1 its senses then goes to complete any idea if thats the part too thanks
Any codes?
I’m getting f3e3 code along with this f7e4 code.. think if just change out this part will resolve issue??
I believe that is the water temperature sensor , your problem should be more on the water valves, computer side
I should upload that fix later
Thank you That video uploaded would be great. You are awesome uploading these videos!
Having the same issue thought it was the inlite value but i replaced and not changed...i got 2 codes f7e4 and f6e3
did you do this repair? if so did it resolve your issue? I have the same 2 codes and have determined it is probably this issue. thanks!
I have the same washer. it goes into sensing, water never turns on then it immediately says washing complete.
did you have that same issue with water?
I have same problem started last night I went found a video on how to run find codes and run diagnostics. The same code plus one more F7E4 came up. Everyone in other videos comments seems to have the same problem we have. I have 5 year warranty so I'm going to see if they can come by and fix it. If not then I'm using this video as reference to fix it myself.
that is exactly what this washer was doing . if anything it poured a few drops of water and then it stopped .
are you receiving any codes on the screen?
towards the end of this video i demonstrated how to get into diagnostic mode and recalibration mode as well
I had this issue with a different Maytag washer. ended up being a bad capacitor. I’d start checking that component out. now I’m having F7 E4 alarm trying to figure that out…
@@dailygrindismif its one of the older models try to check the Actuator