Now I’ve done a workaround for epson printers and pizza wheel marks by printing the sublimation mirrored on A-Sub paper. Take the easy subli off the backing and place on parchment paper and sublimate onto the easy subli with registration marks. Then peel off easy with the sublimated design and place back on mask and heat for about 2-4 seconds to tac it on. Then place on cutting mat in my case the siser Juliet and let it cut out the image and weed out and then place onto clothing for 310 @ 15 Seconds. Worked great doing this method.
Wow! Countless videos watched, tons of expensive trial and error easysubli sheets ruined / lost (tested on old t-shirts so that's not a big deal) and I finally found this video that worked. Thank you!
I think it's important to show what can go wrong instead of editing the video like it came out perfect. You can see you messed up on the words on the bottom but showed a different one at the end.
Yes. We have been scammed. At this point, you can see the mis-registration :ruclips.net/video/1qzoJc1Bc6k/видео.html. I have tried this. Once the subli is down and you pull off the mask, the shirt has stretched. It is extremely difficult or nearly impossible to line up the sublimation paper on top. Cost me the cost of the shirt + subli + paper to find out. Then went back to watch the video to see that it was a lie.
@@jmogyorowhen tacking down the material, a shorter press-time will reduce shrinking and misreg. You could also try sublimating the cut material before pressing to shirt.
Exactly! And why in the world would you cut the mask to fit the image?? You keep it in one piece so you can reuse it! I guess they think we're idiots 😕
THANK YOU SO MUCH for your video!!! I was having a heck of a time and wasting lots of easy subli before your video. Out of alllll of the vidieos I have watched your times and temps are the most accurate. Thanks once again!!!
I love EasySubli. Getting it to line up perfectly is my problem. 😁 I just need more practice. I also wish EasySubli came on rolls and little bit less expensive. Only because I need more to practice with and don't like wasting it. Thank you for the great tutorial!! 👏💖✌️💗💙
Hey guys! I just made my first ever EasySubli printed on 100% cotton, I have never been happier with the results. I am a newbie on the sublimation thing. I am cured lol
Oh the magic of editing! 😍 lol. Love Siser products! They are very vibrant! I feel like I would need an offset to prevent it from looking off center showing the white area from my mishaps.
I just did your process and it turned out so awesome. There was a small area on my design that had some small white dots. Would that indicate too high heat?
Mine usually turn out like the original image that did not have offset, with some white showing up, not like the swap out which was perfect. I wish sublimation paper could be clear. Maybe something for Siser to work on. 😉😉
If you are referring to the vinyl, it wouldn’t work for dark color shirts. If you are referring to the paper you print onto, wouldn’t be made of paper, but would make it easier to line up.
New and excited! Just got my pack of Easy Subli HTV a few days ago. A bit nervous so I am still just looking at it. This video will make it easy for me to take a first step, wish me luck!
You don't have to use mask. Lay the image down. Then lay and line up the easysubli on the image. Use tack spray to adhere the easysubli to the image. Then roll the backing off the easysubli. The easysubli is then adhered to the sub paper. Turn over and press as normal. When done just peel the paper off and easysubli and image are on the shirt.
Hi e2wDesigns. Can you tell me if this is something you have actually tried, and is there a video showing the process? It makes sense to me but I would like to see it in detail and the type of tack spray used. Thank you.
Yep. All these comments saying "I guess I just need more practice lining it up". Nope. This guy does this for a living and even HE messes it up. It's just a pain to get right.
It is not the same when you are working quite than when you are recording or live videos, the main purpose was show us how to apply it without a Sawgrass and it was fine.
I'm new to the sublimation game but I've been watching and researching, and I feel more confused than ever. My understanding is that you print your image from a sublimation printer (not mirrored) onto the Easysubli HTV, then take the mask, which so far in my experience doesn't stick :(, to then press it onto the dark/ cotton shirt. In this video does he print an outline on regular sublimation paper then the colored image again on HTV? Thanks for any clarification!!!
Well, I dont want to advise you incorrectly. Since we dont really have anything to do with sublimation, I am not sure how long the spray will last for light colors. This is why we are showing EasySubli HTV, so you can do full color designs that can be applied to any color or any fabric.
Hello I disnt get to know what temp did you put the easy subli for? Then the temp for the sublimation paper for? I've done mine for: Easy subli- 310 and 10-15 sec which is prob to long? Sublimation paper for- 385 for temp and 60 secs? Was this alot and thats wjy it failed and its faded and i can see it almost look as see through? Thanks
EasySubli can be applied up to 400 degrees which keeps it from scorching or burning. This is the reason that the two step method works. For more info, head over to www.siserna.com to learn more!
Hello amazing video.. You mention protected sheet on top of your image. What kind ? Can I use Teflon sheet instead and can I reuse the protection sheet or Teflon ?? Looking forward to hear from you. Thanks
I would suggest using parchment paper, because it is inexpensive and can be disposable. The Teflon sheet can run the risk of getting ink on it, and you wont want to reuse it once that happens.
We are working diligently at manufacturing to keep up with the demand. We are living through some challenging times with supply chain....If you need it in a pinch, Joann Fabrics will more than likely have it stocked online.
Hi there! I have a question about fading. I tried to use easysubli for the first time on a 100% cotton black shirt and I sublimated my image on A-sub paper and then tried to press the image on my shirt with the easysubli at 311 for 30mins (I saw this on another video before watching yours!) and my image was super faded when I lifted my press result. Is there a reason for this? I also printed my image off a week before pressing it, does that matter?
Hello, it sounds like you didnt press this process at the correct temp.... please contact our Tech Support at 586-203-8171 and we can help guide you through the process :)
Can you please tell me why my image took on the red color of my shirt? First I tacked down the easy subli using 311 degrees for 10 seconds. Then I took my sublimation image and laid it on top of the tacked on easy subli. I pressed at 385 degrees for 30 seconds. The red color of my shirt came thru to the image I put on it so instead of the image being white, it is red
The washing is great! over 25 washes with minimal fading. As for wrinkling, it is all dependent on how large your EasySubli transfer is. If it is larger, then its going to take the shape of how the shirt creases.
You can try it, but Epson Printer heads are usually very low and can cause the EasySubli to jam.... but people have had success printing directly on EasySubli on an Epson.
So after I print on the paper, I tack down the easy subli for 2 seconds, press the sublimation printer on and doneso? I'm just concerned cause it's a longer time than the 15 seconds
yes, if you follow the steps we have in the video, you should have a perfect outcome :) Please reach out to our Tech Support by calling 586-203-8171 and we can help you out there!
The sub print is laying on top of the EasySubli, so you need to mirror your sub print in order for it to match the EasySubli. Please feel free to reach out to our Tech support at Support@siserna.com and we can further help you out!
Same shirt?? While on the press the bottom green "S" & the "I" has some white edge space (like it wasn't lined up correctly) & in the final shot there is no white space..... 🤔
I cut out the design on the easy subli but when I print the design on regular sublimation paper the design doesn't match up to be the same size it's smaller can you tell me what I'm doing wrong?
HELP! I printed my design (mirrored) onto my sublimation paper...how in the world do I get my cricut to cut out the design on the easy subli if there is no design on it and no registration marks? What am I missing?
you need to just get the "silhouette shape" of your printed image. Just create a vector shape of it, and make sure you cut it WITHOUT mirroring the file on the EasySubli.
not possible to transfer it with sublimation paper directly to the easy subli and let it dry for cutting? i tested it but the easy subli will damage.. right? i can do print & cut, it works fine but the colors are better in the 2 step way. your layering method is not good for designs with several items.
@@SiserNorthAmerica yes! I’ve printed it on the matte side, however, when I start weeding, the image is on the matte side still and not gloss side. You think I probably got a bad batch?
You just have to place the blank EasySubli on your Cricut and send the cut file that goes with the sublimation print over to the cutter. My sure you do not mirror your cut file. Mirror only for the sublimation print.
I’m very disappointed. It took me literally 3 hours to get the sisser subli to come off on the transfer MASK. All my words were individual letters. It was the absolute worst. If I had 100 of these to do I could not take this order. What in the world am I doing wrong. Please advise. It’s the 5 pack of sisser easy subli. I didn’t mirror either.
Is the only purpose of the mask to be used like transfer tape? Or is there another purpose for the mask? And can the mask be re-used like transfer tape?
When using the Easy Subli do you cut that the exaxt same size as your image that is on sublimation paper? Or do you make the subli a little bigger (like a shadow affect)?
that is a total preference! In this video, I show two routes you can go. You can have the EasySubli transfer cut the same as the sub print, but you have to make sure your registration is accurate or you will have an offset. Or you can give yourself wiggle room, but making the EasySubli transfer a little larger than the print, but you will have a white boarder.
nope, I only printed the sublimation print onto sublimation paper. Then I cut the shape of my sublimation print on the raw EasySubli material. Then applied them together.
You can try to hand cut it, if you are looking for detailed designs.... otherwise you can print full prints on the sheet of EasySubli and just apply those.
well you guys need to get away from this multi step process and just sell printable HTV which can be used with inkjet or sublimation ink and one step process. i have the product i am talking about and it last more than 50 washes. you can buy 20 sheets at about $50
i did it just as you said with the exact product ITS THE WORST AND A WASTE OF MONEY it too forever to use the weed too l to transfer to the mask. once on the mask i went to put on shirt and the easysubi HTV stayed on the mask and didnt transfer over. I HATE THIS!!!!!!!!!!! I wasted money on a printer, cameo 4 pro and product!! CHINA HERE I COME!!! Forget this..
Now I’ve done a workaround for epson printers and pizza wheel marks by printing the sublimation mirrored on A-Sub paper. Take the easy subli off the backing and place on parchment paper and sublimate onto the easy subli with registration marks. Then peel off easy with the sublimated design and place back on mask and heat for about 2-4 seconds to tac it on. Then place on cutting mat in my case the siser Juliet and let it cut out the image and weed out and then place onto clothing for 310 @ 15 Seconds. Worked great doing this method.
Thanks for sharing!
i need video pls
I have watch videos all day and mess up so much. This is thr only video that explains it all. Thank you.
I know this is an Old video, but I would LOVE people in these videos to say which way they lay the Subli - shiny down - up or whatever.....
Wow! Countless videos watched, tons of expensive trial and error easysubli sheets ruined / lost (tested on old t-shirts so that's not a big deal) and I finally found this video that worked. Thank you!
I think it's important to show what can go wrong instead of editing the video like it came out perfect. You can see you messed up on the words on the bottom but showed a different one at the end.
It is not him is the company, anyway he was showing another way to apply it without a sawgrass which was perfect explanation.
Lol I saw that white showing too, but didn't see it at the end
Yes. We have been scammed. At this point, you can see the mis-registration :ruclips.net/video/1qzoJc1Bc6k/видео.html. I have tried this. Once the subli is down and you pull off the mask, the shirt has stretched. It is extremely difficult or nearly impossible to line up the sublimation paper on top. Cost me the cost of the shirt + subli + paper to find out. Then went back to watch the video to see that it was a lie.
@@jmogyorowhen tacking down the material, a shorter press-time will reduce shrinking and misreg.
You could also try sublimating the cut material before pressing to shirt.
Exactly! And why in the world would you cut the mask to fit the image?? You keep it in one piece so you can reuse it! I guess they think we're idiots 😕
THANK YOU SO MUCH for your video!!! I was having a heck of a time and wasting lots of easy subli before your video. Out of alllll of the vidieos I have watched your times and temps are the most accurate. Thanks once again!!!
We make the stuff, so we strive for as close to perfect as we can get! 😎
Thanks for tuning in!
I love EasySubli. Getting it to line up perfectly is my problem. 😁 I just need more practice. I also wish EasySubli came on rolls and little bit less expensive. Only because I need more to practice with and don't like wasting it.
Thank you for the great tutorial!!
👏💖✌️💗💙
Dyetrans has rolls
It comes on rolls
Best video I have seen on how to use this stuff and even when to use the mask. Thank you so much for making it so clear to understand.
Hey guys! I just made my first ever EasySubli printed on 100% cotton, I have never been happier with the results. I am a newbie on the sublimation thing. I am cured lol
Love to hear it!! EasySubli is a game changer!
Oh the magic of editing! 😍 lol. Love Siser products! They are very vibrant! I feel like I would need an offset to prevent it from looking off center showing the white area from my mishaps.
or you can give yourself a good bleed on your sublimation print so when you line it up, you will have some wiggle room.
@@SiserNorthAmerica How do you do that
Joe, I have a son who could be your doppelgänger!! I’ve shared your videos with the fam and they all dropped their jaws!!! 😁
Oh, and thank you for your awesome videos!!
@@kathyneveu1708 I love to hear it!! :)
I just did your process and it turned out so awesome. There was a small area on my design that had some small white dots. Would that indicate too high heat?
EasySubli is the best product I ever met... At least for me. I use a Epson Printer, the only very bad is the printer no very good. Well done Siser!
Mine usually turn out like the original image that did not have offset, with some white showing up, not like the swap out which was perfect. I wish sublimation paper could be clear. Maybe something for Siser to work on. 😉😉
If you are referring to the vinyl, it wouldn’t work for dark color shirts. If you are referring to the paper you print onto, wouldn’t be made of paper, but would make it easier to line up.
that would be a great accomplishment!
All this work and still have the feel of that butter-bib they give when eating lobster :) :) :)
Hi from Germany:) i'm always printing direct on easysubli and the color is very brillant. And no i dont use sawgrass:). Its a great product :) Gabriel
Great to hear it! don't fix what isn't broken :)
New and excited! Just got my pack of Easy Subli HTV a few days ago. A bit nervous so I am still just looking at it. This video will make it easy for me to take a first step, wish me luck!
You got this!! and if you have more questions on EasySubli, please do not hesitate to contact our Tech Support by emailing Support@siserna.com
You don't have to use mask.
Lay the image down.
Then lay and line up the easysubli on the image.
Use tack spray to adhere the easysubli to the image.
Then roll the backing off the easysubli.
The easysubli is then adhered to the sub paper.
Turn over and press as normal.
When done just peel the paper off and easysubli and image are on the shirt.
Great suggestions! There are many ways to bake a cake!
Hi e2wDesigns. Can you tell me if this is something you have actually tried, and is there a video showing the process? It makes sense to me but I would like to see it in detail and the type of tack spray used. Thank you.
this will greatly broaden my range of vinyl work but when did this easy subli come out
Thank you!
thank you for explaining so simply--can't wait to try this.
Joe, this was really informative and I be so glad when I can purchase those high end machines. Thanks 🙏 for sharing.
You are very welcome, Tonie! :)
I saw that JOE! You redid the shirt. The first one you didn't line up right with the bleed. The SIS, in the beginning, was a bit low.
I saw it too 😹
Yep. All these comments saying "I guess I just need more practice lining it up". Nope. This guy does this for a living and even HE messes it up. It's just a pain to get right.
lol no integrity or accountability
It is not the same when you are working quite than when you are recording or live videos, the main purpose was show us how to apply it without a Sawgrass and it was fine.
@@kobejames9171 lol it is not that serious
I'm new to the sublimation game but I've been watching and researching, and I feel more confused than ever. My understanding is that you print your image from a sublimation printer (not mirrored) onto the Easysubli HTV, then take the mask, which so far in my experience doesn't stick :(, to then press it onto the dark/ cotton shirt. In this video does he print an outline on regular sublimation paper then the colored image again on HTV? Thanks for any clarification!!!
Hey Friend! It may be a great idea to reach out to our Support team at support@siserna.com and they will be able to walk you thru the process :)
Saving this so I can watch as I make it to be sure I can. Do you recommend the spray for sublimation on light colors?
Well, I dont want to advise you incorrectly. Since we dont really have anything to do with sublimation, I am not sure how long the spray will last for light colors. This is why we are showing EasySubli HTV, so you can do full color designs that can be applied to any color or any fabric.
Hello
I disnt get to know what temp did you put the easy subli for? Then the temp for the sublimation paper for?
I've done mine for: Easy subli- 310 and 10-15 sec which is prob to long?
Sublimation paper for- 385 for temp and 60 secs? Was this alot and thats wjy it failed and its faded and i can see it almost look as see through?
Thanks
EasySubli can be applied up to 400 degrees which keeps it from scorching or burning. This is the reason that the two step method works. For more info, head over to www.siserna.com to learn more!
So how do you get your transfer into Silhouette so you can cut it out? I'm lost about that part of the process.
Great easy to watch process thanks heaps 😊
You are very welcome! :)
Hi! Awesome video. Where do I order the green white paper to sublimate ?
please email us at info@siserna.com
Hello amazing video.. You mention protected sheet on top of your image. What kind ? Can I use Teflon sheet instead and can I reuse the protection sheet or Teflon ?? Looking forward to hear from you.
Thanks
use butcher paper or craft paper to protect your heat press from catching the ink
I would suggest using parchment paper, because it is inexpensive and can be disposable. The Teflon sheet can run the risk of getting ink on it, and you wont want to reuse it once that happens.
I love EasySubli. I just wish it would remain in stock more. It's always hard to find.😩
We are working diligently at manufacturing to keep up with the demand. We are living through some challenging times with supply chain....If you need it in a pinch, Joann Fabrics will more than likely have it stocked online.
And insanely expensive!
What side of the easysubli to you face up? The rough side or smooth side?
The "rougher" side of the EasySubli is the side that will receive the sublimation ink.
Thanks for this video
Right on Joe, thanks
Do you have any information on laser cutting Brick 600, or laser ablation on vinyl?
please reach out to our Tech Support by calling 586-203-8171 and we will help you out with this!
Hi there! I have a question about fading. I tried to use easysubli for the first time on a 100% cotton black shirt and I sublimated my image on A-sub paper and then tried to press the image on my shirt with the easysubli at 311 for 30mins (I saw this on another video before watching yours!) and my image was super faded when I lifted my press result. Is there a reason for this? I also printed my image off a week before pressing it, does that matter?
Hello, it sounds like you didnt press this process at the correct temp.... please contact our Tech Support at 586-203-8171 and we can help guide you through the process :)
Can you please tell me why my image took on the red color of my shirt? First I tacked down the easy subli using 311 degrees for 10 seconds. Then I took my sublimation image and laid it on top of the tacked on easy subli. I pressed at 385 degrees for 30 seconds. The red color of my shirt came thru to the image I put on it so instead of the image being white, it is red
Thank you so much
Hi what side do I cut on the paper
Glossy or rough
Like which side goes on the paper
on the EasySubli HTV, you are going to cut on the rougher side.
How about washing? does it have wrinkles on image? please explain
The washing is great! over 25 washes with minimal fading. As for wrinkling, it is all dependent on how large your EasySubli transfer is. If it is larger, then its going to take the shape of how the shirt creases.
Is EasySubli HTV paper supposed have a grainy(white dots) look after printing? Would doing the 2 step eliminate that?
The 2 step process may give you a crispier result. The white dots are from how the ink lays down on the EasySubli when printed directly on it.
@@SiserNorthAmerica That worked. Thank you!
May I use Epson printer for printing directly on the easysubli paper?
You can try it, but Epson Printer heads are usually very low and can cause the EasySubli to jam.... but people have had success printing directly on EasySubli on an Epson.
can you use the Cricut easy press????
You may, but the heat for sublimation needs to be consistent and even.
What are you using for the cover sheet?
you should use sheets of parchment paper
Can't you cut the subliimation print as well to get a better line up.?
Yes
So after I print on the paper, I tack down the easy subli for 2 seconds, press the sublimation printer on and doneso? I'm just concerned cause it's a longer time than the 15 seconds
yes, if you follow the steps we have in the video, you should have a perfect outcome :)
Please reach out to our Tech Support by calling 586-203-8171 and we can help you out there!
what software do you use to get the sublimation and the easysubli to be the same size?
I create both in Illustrator....but you can use any design software.
Love it
Is the mask reusable after transferring
Yes but only for 2-3 times
Great video why can't they make a clear sublimation paper that would be great or a least a frosty kind 🤔🤔🤔🤔 thank u
Thank you! ...and I agree! that is the next million dollar idea!
So how do I cut my design on the easy subli if I didn't print on it
You would cut the "silhouette" or "shape" of your design that you printed out onto the raw EasySubli
Since I am new I am confused. Why would I mirror the print but not the cut file, especially if it needs to be weeded instead of trimed? Thanks
The sub print is laying on top of the EasySubli, so you need to mirror your sub print in order for it to match the EasySubli.
Please feel free to reach out to our Tech support at Support@siserna.com and we can further help you out!
Isn't the main point of EasySubli is that you can print on it?
Yes, but not everyone has a printer that can successfully print directly onto EasySubli.
I WONDER WHERE you learned this method from.. Hmmm 🤣🤣 Shout out to me. It’s totally fine!! 💛 You’re welcome.
Where can I get some easy subl transfer paper from?
please contact us by emailing info@siserna.com
however you did a great job
Thank you!
its very difficult to match the easysubli with the sublimation paper any tricks?
Its best to trim the sublimation paper close enough to your design, so you can find the registration.
So you said mirror but do not mirror cut file. Correct so do I mirror the image
You do mirror the print image
What Sublimation paper did you use?
TexPrint-R paper
How do you just do a white sublimation on a black shirt
Contour cut your sublimatable vinyl and apply print on top
What time and temp used
380 for 25 seconds 😊
Same shirt?? While on the press the bottom green "S" & the "I" has some white edge space (like it wasn't lined up correctly) & in the final shot there is no white space..... 🤔
I cut out the design on the easy subli but when I print the design on regular sublimation paper the design doesn't match up to be the same size it's smaller can you tell me what I'm doing wrong?
You may want to look at your print settings and make sure the software doesnt size your design down.
HELP! I printed my design (mirrored) onto my sublimation paper...how in the world do I get my cricut to cut out the design on the easy subli if there is no design on it and no registration marks? What am I missing?
you need to just get the "silhouette shape" of your printed image. Just create a vector shape of it, and make sure you cut it WITHOUT mirroring the file on the EasySubli.
not possible to transfer it with sublimation paper directly to the easy subli and let it dry for cutting? i tested it but the easy subli will damage.. right? i can do print & cut, it works fine but the colors are better in the 2 step way. your layering method is not good for designs with several items.
Why wouldn’t the easisubli not stick to the shirt?
It will stick to the shirt with a full application!
7:07 The bottom is different 7:17 seems like a better cut
Does the finished design feel like vinyl or does it feel more like sublimation
There is still a hand to the transfer, since it is being applied to a vinyl.
When I weed my design, the design doesn’t stay on the sticky part. It actually stays on the matte side. Can you assist?
Yes, you would lay the sublimation down on the Matte side of the EasySubli
@@SiserNorthAmerica yes! I’ve printed it on the matte side, however, when I start weeding, the image is on the matte side still and not gloss side. You think I probably got a bad batch?
@@avclanton4960 please feel free to reach out to our Tech Support and we will try and remedy this Support@siserna.com
My question is.. how do I get my Cricut to cut the easysubli withOUT the registration mark (since we're printing on the regular sublimation paper???)
You just have to place the blank EasySubli on your Cricut and send the cut file that goes with the sublimation print over to the cutter. My sure you do not mirror your cut file. Mirror only for the sublimation print.
It doesn’t tell you which side to sublimate on ruff side or shiny side?
Rough side
@@SiserNorthAmerica Ty
What a handsome man 😅
I took a shot every time he said EasySubli and now I'm in the queue for a kidney transplant.
now you'll never forget the product name ;)
I’m very disappointed. It took me literally 3 hours to get the sisser subli to come off on the transfer MASK. All my words were individual letters. It was the absolute worst. If I had 100 of these to do I could not take this order. What in the world am I doing wrong. Please advise. It’s the 5 pack of sisser easy subli. I didn’t mirror either.
please contact our Tech Support by calling 586-203-8171 and we will try and remedy this for you
Is the only purpose of the mask to be used like transfer tape? Or is there another purpose for the mask? And can the mask be re-used like transfer tape?
yes, the mask is to be used like a transfer tape. If you design is multiple pieces, its so you can transfer it all at once :)
i wish i could post an image im so disappointed, i bought everything to the T,
email that image to Support@siserna.com
When using the Easy Subli do you cut that the exaxt same size as your image that is on sublimation paper? Or do you make the subli a little bigger (like a shadow affect)?
that is a total preference! In this video, I show two routes you can go. You can have the EasySubli transfer cut the same as the sub print, but you have to make sure your registration is accurate or you will have an offset.
Or you can give yourself wiggle room, but making the EasySubli transfer a little larger than the print, but you will have a white boarder.
@@SiserNorthAmerica Can you have a bigger area of the subli? Like a bleached background effect?
Kinda confused…. He printed the image in two different materials? The easy subli and another one?
nope, I only printed the sublimation print onto sublimation paper. Then I cut the shape of my sublimation print on the raw EasySubli material. Then applied them together.
@@SiserNorthAmerica awesome! Thanks so much for the reply. Best wishes with this awesome channel!!
How can I use easy subli if I don’t have a cricut or vinyl cutter?!
You can try to hand cut it, if you are looking for detailed designs.... otherwise you can print full prints on the sheet of EasySubli and just apply those.
My ink won't dry
please reach out to us at Support@siserna.com
try putting it under you heat press for 30 seconds to allow the heat press to dry it out.
Wow is this. Product going to get cheaper!
well you guys need to get away from this multi step process and just sell printable HTV which can be used with inkjet or sublimation ink and one step process. i have the product i am talking about and it last more than 50 washes. you can buy 20 sheets at about $50
What is it?
But like- Is he okay? He seems really jittery and nervous at points in this video.
I have an essential tremor, but thanks for noticing!
@@SiserNorthAmerica i May have the same 🙀 my coffee habits don’t help but at least I started mixing some decaf along with regular 😅
Omg so much work for one simple shirt... No thanks...
i did it just as you said with the exact product ITS THE WORST AND A WASTE OF MONEY it too forever to use the weed too l to transfer to the mask. once on the mask i went to put on shirt and the easysubi HTV stayed on the mask and didnt transfer over. I HATE THIS!!!!!!!!!!! I wasted money on a printer, cameo 4 pro and product!! CHINA HERE I COME!!! Forget this..
Please feel free to reach out to our Tech Support and we will remedy this experience for you!
email us at Support@siserna.com