Hello Martin the last time I seen someone use spray foam in those cans that expands around their windows and doors after it setup they had to literally take a knife and cut it back out from around them because after it expanded on them they couldn't open the windows and doors back open because of it too and they quickly learned to take regular isolation and cut little pieces of it and take a knife or a slim piece of wood and put it around there now and Merry Christmas to you and the family too
Hey Julie, this is Jake. Can you resend me your message? I've been sick this week and broke my phone before I could retrieve your message. So I've lost a bunch of contact info and all my messages. Thanks.
the fan is powered by a peltier module. it can produce power when there is a temperature difference between the two sides. It also can get ice cold on one side and hot on the other side if you apply a little DC current at low voltage, depending what the peltier cooler is rated for. They are also used in little fridges that are made to work at 12v in your car. they are not very efficient at keeping things cold, but they work.
While Marty, if you let Sarah plan the interior decoration for he apartment!! Just May get you to the dream you had to rent it to Sarah or Seth one day. I think it would be a great idea. With Sarah’s plans to continue on doing missionary work, would give her a safe place for her to come home to and not worry about having to find a place too come home to set up home again. And when you build your shop, you could do like Courtney and Riley from ambition streaks did. Keep up the great job you guys are doing, and love the Dynamics of the channel. Keep smiling:)
What is powering the fan? It's a Peltier device, between the top and bottom of the fan. It's the thin white thing you can see sandwiched in there. When heated they produce electricity.
Marty, If you drywall the window frames you may have a problem down the road with the moisture that accumulates on the glass dripping on the drywall and messing it up. I have always just gotten some cedar fence pickets and ripped them to the right width and then cu them to length on the horizontal side then cut the vertical to fit into the space between. If you sand and seal the boards it will look amazing and last for a very long time. Not to mention the area you are sanding and cutting will smell amazing.
I have to tell you guys that when I am done watching your videos my cheeks hurt from smiling so much. Thanks for bringing joy to your watchers and Merry Christmas.
Hey Martin just thought I would drop you a little pro tip. A uncluttered work space is a better safe and efficient work area. The unit is coming along great.
It's funny because in Denmark we have tu use two layers of drywall on the walls and sealing. They are only 90 cm so they are not so heavy. Good work guys. Looks really good!!!
Lightly spray the foam with water and it will stop it from growing or severely slow it down. the water coating seals out the oxygen and stops it from growing..
Only 7 more days and 196 more push ups!! Wow, these are getting hard, but at the beginning of the month I would have never guessed that I could do this many. LOL Merry Christmas you all.
Merry Christmas Johnsons! Just a quick tip on the stuck back door on the SUV. Clean the rubber seal well with some rubbing alcohol and then just a little wipe with some vaseline on a rag and no more stuck door. Much love and happy wishes from Elk City Idaho.
Not dissimilar metals but a Peltier semiconductor. They are a type of semiconductor P/N junction. If you apply heat to one side while the other is cool (That's why there are cooling fins on the fan unit) it will generate a small amount of electric current. That's what turns the motor. Peltier fans are cool devices! Pronounced: "Pell-T-A"
I was surprised to see at the end of a sunny day you hadn't cleared the snow off your solar panels. A missed opportunity for free energy. With daylight as short as it is this time of the year, I would have thought you'd take advantage of every bit of sun you could get.
Hi I'm from South Africa 🇿🇦, single mother. Love watching your videos, i can't join your live stream, because it is a little difficult the time difference, but I watch it when you put it on. Your family are great. Keep up with the good work. God bless you and your family.
I heard you talking about the fan on top of your stove. the reason the fan turns is because heat raises and the hotter it is the faster it raises. when we run our electric fire place our ceiling fan turns
AHhh, Julie, I love your hard work; you're doing a Great Job💙!!!And Martin Remember {A Happy Wife A Happy Life} Man, haha!!! Happy Holiday s, Johnson Family✨️ P.S. Sarah Color scheme sounds Spot On Great Choices 👍🏾
Hey Marty Johnson family my husband and I just did 24 pushups..hahaha we've been working our way up. Thanks for the push-up challenge. The house is looking great. You all are a joy to watch. God bless you guys. ❤️🥰
I should start doing pushups again! That thin white bit, you can see inside the middle part of the fan is a thermoelectric panel, that uses the difference in temperature between the stove-part and the fan/fin part to create electricity, which drives the fan. But magic is about the correct description too. 😁
Living in sw fla is ideal. I wouldn't be caught dead living where you are. Last night was 47 here I was freezing but got under a warm blanket. We rarely use our heater.
Guys suggestion.... there is really no need to pre fill the places where the corner beads go.. especially since you have mud on corner bead.. the way mud on corner bead is applied is the same way you tape.. slather it down with mud , firmly place the corner bead against the corner. Then using the taping knife press the paper into the mud. And wipe the wall down from excess mud. Then allow those to dry completely before adding anymore mud.
Is it just me or does the higher number make them feel harder from the first one? 🤣 I adore Sarah's idea of choosing the finishes. It means she is more likely to move back to Idaho when school is done. Merry Christmas!
Merry Christmas to the Johnson Family🌴🌺😎 I saw the extension cord going through the slider and thought why not just plug it into an exterior receptacle. Then I saw the shot of the deck at 8:26 and realized it didn't look like you had any. You may want to pop a couple in before you get too far with taping and paint. That will be a favorite spot in the summer, BT speakers, blenders, etc.
Merry Christmas Marty,Jules,Sarah and Seth. As we say in German- Froeliche Weihnachten! I wish you all a Healthy and Happy New Year' God Bless and Semper Fi! Peter,p.s. still doing my push ups!!!!
You can use some of the remnant drywall on the inside of closets and that way you use up some of the left overs. It takes a little more mud work but in some scenarios it can save a few full sheets of drywall.
Temperature _and_ humidity both play important roles in regards to thinset curing. Even if the thinset is cold, it will eventually cure well if the surrounding humidity is low as it should be in a cold Idaho room.
Well, let me tell you about thermoelectricity.....that's what's powering the fan. I worked that engineering field for 45 years!! My company made thermoelectric generators (and still does). There are 2 on the surface of the planet Mars....powering the Curiosity and Perseverance Rovers driving around Mars. On Mars, nuclear fuel provides the heat for a VERY long time!! Oh, and I did my 24 pushups today too....
looks like the sheet Rocking fun part is over ! Now it is tape and mud the hard part- then Paint.... Love the pushups been pumping them out too! Suggestion for 2022 now that Push up drill Sargent Martin has built the family up to a months worth = 30 you should just carry over to 2022 and now do 30 a day! for January! Merry Christmas
I missed your live, but still did my push-ups. So far, so good! Let's go! 😁 Never played Carcasonne or heard of it. Good color choices Sarah! I'd go for a non-porous surface on the counters.
Good morning Julie how are you you guys have a merry Christmas and you guys be safe Marty you guys be careful out there make sure text get his Christmas presents
🔥 WATCH OUR OFF-GRID HOME BUILD FROM THE BEGINNING bit.ly/OffGridCabinBuild
Hello Martin the last time I seen someone use spray foam in those cans that expands around their windows and doors after it setup they had to literally take a knife and cut it back out from around them because after it expanded on them they couldn't open the windows and doors back open because of it too and they quickly learned to take regular isolation and cut little pieces of it and take a knife or a slim piece of wood and put it around there now and Merry Christmas to you and the family too
Hi Martin where is fan link?
Hey Julie, this is Jake. Can you resend me your message? I've been sick this week and broke my phone before I could retrieve your message. So I've lost a bunch of contact info and all my messages. Thanks.
Hey Martin just a quick question where is the water lines for the kitchen sink
I see the drain but no water lines
Today was a bit hard on me. 😔 Sarah made me feel A LOT better.
Are you sometimes cooking indonesian food?
24 pushups at 61, I'm happy 😃
the fan is powered by a peltier module. it can produce power when there is a temperature difference between the two sides.
It also can get ice cold on one side and hot on the other side if you apply a little DC current at low voltage, depending what the peltier cooler is rated for. They are also used in little fridges that are made to work at 12v in your car. they are not very efficient at keeping things cold, but they work.
Every thing is sow beauty full.
That fan uses Peltier elements. They can convert heat and cold to energy. They are also used in cool boxes but more the simple ones.
The fan is wired through a peltier element. Peltier element works with temperature difference between the top and bottom.
There is Peltier device in the fan. If u heat it up it generates DC electricity. If u put DC into it one side gets hot and the other cold!
Ah! How full of life a family you have!
Emotional One.
You should think about using 1x4 primed wood around your windows instead of sheet rock. Less of an issue of mold in the future around those windows.
While Marty, if you let Sarah plan the interior decoration for he apartment!! Just May get you to the dream you had to rent it to Sarah or Seth one day. I think it would be a great idea. With Sarah’s plans to continue on doing missionary work, would give her a safe place for her to come home to and not worry about having to find a place too come home to set up home again. And when you build your shop, you could do like Courtney and Riley from ambition streaks did. Keep up the great job you guys are doing, and love the Dynamics of the channel. Keep smiling:)
Merry Christmas to the entire Johnson family!
What is powering the fan? It's a Peltier device, between the top and bottom of the fan. It's the thin white thing you can see sandwiched in there. When heated they produce electricity.
Wishing you all a Very Merry Christmas 🤶🎅
The fan is powered by a solid-state Peltier device. And that takes the place of the dissimilar metals.
Good morning!☀️😃
Martin is always the best push-ups
Joyeux Noël à tous et du bonheur et belle soirée
Merry Christmas to you all your lovely family 🇬🇧 ❤️
Should not use sheet rock on window seals In a cold climate. Will have mold issues. Love you all.
Merry Christmas from the Cantrell family.
This channel is growing on me 👍
Always miss this family
thats is some good ice cream making snow...love it
Marty, If you drywall the window frames you may have a problem down the road with the moisture that accumulates on the glass dripping on the drywall and messing it up. I have always just gotten some cedar fence pickets and ripped them to the right width and then cu them to length on the horizontal side then cut the vertical to fit into the space between. If you sand and seal the boards it will look amazing and last for a very long time. Not to mention the area you are sanding and cutting will smell amazing.
Carcason (sp?) is super fun. Only played once but loved it. Like Catan.
What are your favorite board games?
Sarah that was hilarious! 😂
Snow
I have to tell you guys that when I am done watching your videos my cheeks hurt from smiling so much. Thanks for bringing joy to your watchers and Merry Christmas.
Hey Martin just thought I would drop you a little pro tip. A uncluttered work space is a better safe and efficient work area. The unit is coming along great.
Hello Good morning ..,, Martin Johnson and your family ... Have a nice day
Hello, Your going to Fast on the push ups Martin.☺
It's funny because in Denmark we have tu use two layers of drywall on the walls and sealing. They are only 90 cm so they are not so heavy. Good work guys. Looks really good!!!
Lightly spray the foam with water and it will stop it from growing or severely slow it down. the water coating seals out the oxygen and stops it from growing..
Happy Christmas Johnsons. I hope you have a peaceful and memorable time and that you also manage a couple of days of pure rest!
⛪️🎄🎅🏻🔥Merry Christmas FRIENDs of GBL…. We did our 1st Fire It Up Friday today!
Still doing the pushups, thanks.
Only 7 more days and 196 more push ups!! Wow, these are getting hard, but at the beginning of the month I would have never guessed that I could do this many. LOL Merry Christmas you all.
ideal temp for doing mud work and drying is 70
I just experienced time travel. Watched your 25 push ups just now n went to the suggested vid. WOW you all just did 24. Thank You ...
Put. Little dish soap in quick set stir and it will be smoother in your spreading.
Merry Christmas, what a beautiful landscape!! Beautiful white Christmas!!!!!
Hello, Martin and your family ... Merry Christmas and happy new year.
Merry Christmas Johnsons! Just a quick tip on the stuck back door on the SUV. Clean the rubber seal well with some rubbing alcohol and then just a little wipe with some vaseline on a rag and no more stuck door. Much love and happy wishes from Elk City Idaho.
Merry Christmas to you all!
Sara was the morale booster for the day ❤
Merry Christmas 🎄🎅☃️✨🎈
Not dissimilar metals but a Peltier semiconductor. They are a type of semiconductor P/N junction. If you apply heat to one side while the other is cool (That's why there are cooling fins on the fan unit) it will generate a small amount of electric current. That's what turns the motor. Peltier fans are cool devices! Pronounced: "Pell-T-A"
I was surprised to see at the end of a sunny day you hadn't cleared the snow off your solar panels. A missed opportunity for free energy. With daylight as short as it is this time of the year, I would have thought you'd take advantage of every bit of sun you could get.
I think it’s sooo funny that the parents r in better shape then the kids👍. Go Marty & Julie. Luv u guys. Have a merry Xmas🎄
Now that we know how the fan works...you should have several of those fans on the stove. It will spread the heat through the whole room and house.
Hi I'm from South Africa 🇿🇦, single mother. Love watching your videos, i can't join your live stream, because it is a little difficult the time difference, but I watch it when you put it on. Your family are great. Keep up with the good work. God bless you and your family.
I heard you talking about the fan on top of your stove. the reason the fan turns is because heat raises and the hotter it is the faster it raises. when we run our electric fire place our ceiling fan turns
I love Sarah’s color ideas! Merry Christmas everyone! Stay warm!
Merry and blessed Christmas to you all.
AHhh, Julie, I love your hard work; you're doing a Great Job💙!!!And Martin Remember {A Happy Wife A Happy Life} Man, haha!!! Happy Holiday s, Johnson Family✨️ P.S. Sarah Color scheme sounds Spot On Great Choices 👍🏾
Hey Marty Johnson family my husband and I just did 24 pushups..hahaha we've been working our way up. Thanks for the push-up challenge. The house is looking great. You all are a joy to watch. God bless you guys. ❤️🥰
I should start doing pushups again!
That thin white bit, you can see inside the middle part of the fan is a thermoelectric panel, that uses the difference in temperature between the stove-part and the fan/fin part to create electricity, which drives the fan. But magic is about the correct description too. 😁
Thanks for the efforts!
Merry Christmas everyone!!!!!
MERRY CHRISTMAS JOHNSONS 🎄🎄👍
Living in sw fla is ideal. I wouldn't be caught dead living where you are. Last night was 47 here I was freezing but got under a warm blanket. We rarely use our heater.
Guys suggestion.... there is really no need to pre fill the places where the corner beads go.. especially since you have mud on corner bead.. the way mud on corner bead is applied is the same way you tape.. slather it down with mud , firmly place the corner bead against the corner. Then using the taping knife press the paper into the mud. And wipe the wall down from excess mud. Then allow those to dry completely before adding anymore mud.
Merry Christmas to all of you from Uruguay
Merry Christmas to you and your family 🤶🎅
We used that type of fan in out cabin. They are a great investment.
Nice job Seth Going the mile on your pushup
Put tile on windows sills for no rot easy cleaning
I bought one of those for my daughter last year, does cause wonder as to how the fan is powered yes it’s magic
Your view is so beautiful!
Merry Christmas and a Happy New Year.
Is it just me or does the higher number make them feel harder from the first one? 🤣
I adore Sarah's idea of choosing the finishes. It means she is more likely to move back to Idaho when school is done.
Merry Christmas!
Marty and Julie, have a happy Christmas and a wonderful New Year!
Merry Christmas Julie, Marty and kids.
Merry Christmas to the Johnson Family🌴🌺😎 I saw the extension cord going through the slider and thought why not just plug it into an exterior receptacle. Then I saw the shot of the deck at 8:26 and realized it didn't look like you had any. You may want to pop a couple in before you get too far with taping and paint. That will be a favorite spot in the summer, BT speakers, blenders, etc.
Merry Christmas!🎁
Merry Christmas Marty,Jules,Sarah and Seth. As we say in German- Froeliche Weihnachten! I wish you all a Healthy and Happy New Year' God Bless and Semper Fi! Peter,p.s. still doing my push ups!!!!
Selamat natal dan tahun baru
Just want to wish Tux (the star) and his humans a very Merry Christmas and a Happy New Year!
You can use some of the remnant drywall on the inside of closets and that way you use up some of the left overs. It takes a little more mud work but in some scenarios it can save a few full sheets of drywall.
Good morning johnson’s I did my 24 push-ups your place is looking good.
Merry Christmas and God bless.
Merry Christmas 🎄🎁
Sarah tambah cantik. Tertawanya seperti ibu julie
Merry Christmas and Happy New Year.Loved spending another year with your family.And who cannot love Jewls beautiful smile and laugh
🇳🇱Merry Christmas and a prosperous and healthy 2022.🎄🎄🎄🎄👍👍👍🍀
Merry Christmas and a happy healthy safe 2022 God bless
Temperature _and_ humidity both play important roles in regards to thinset curing. Even if the thinset is cold, it will eventually cure well if the surrounding humidity is low as it should be in a cold Idaho room.
Well, let me tell you about thermoelectricity.....that's what's powering the fan. I worked that engineering field for 45 years!! My company made thermoelectric generators (and still does). There are 2 on the surface of the planet Mars....powering the Curiosity and Perseverance Rovers driving around Mars. On Mars, nuclear fuel provides the heat for a VERY long time!! Oh, and I did my 24 pushups today too....
looks like the sheet
Rocking fun part is over ! Now it is tape and mud the hard part- then Paint.... Love the pushups been pumping them
out too! Suggestion for 2022 now that Push up drill Sargent Martin has built the family up to a months worth = 30 you should just carry over to 2022 and now do 30 a day! for January! Merry Christmas
Merry Christmas to you all from Neil schwerdt
GOOD MORNING IN NORTH IDAHO TO THE MARTY JOHSON FAMILY ---- MERRY CHRISTMAS AND A HAPPY--HAPPY NEW YEAR 2022 '''
Salut. I sure like the the snowface. 😜😜😜 Happy holidays to one and all. May this time find yous safe 'n sound.
P S Seth if you shave your eyebrows and do your PUs one hand facing North, I will vote for you in the last election. 😝😝😝😝😝😝😝
Merry Christmas from Oslo, Norway
God is blessing you ALL and have a wonderful, beautiful Christmas...big hugs to you ALL.
Merry Christmas Martin and fam!!!!!
....good one, keep safe..
you have a ton of sanding to do. bet that will be fun.
Sukses selalu pak Martin.
What drives it is a thermo electric current generates by temperature difference of junctions of dissimilar metals, one hot and one Cold.
I missed your live, but still did my push-ups. So far, so good! Let's go! 😁
Never played Carcasonne or heard of it.
Good color choices Sarah! I'd go for a non-porous surface on the counters.
Good morning Julie how are you you guys have a merry Christmas and you guys be safe Marty you guys be careful out there make sure text get his Christmas presents