Is it possible to remove the rear spring shocker permanatly? I don't want the rear shocker on the bike anymore, so is it possible to remove it permanatly?
If you go to the Racetech website it has a calculator tool that allows to select your bike and rider weight. From there the website will give you a recommendation on what springs to go for front and rear Hope this helps!
For that KYB shock, can you just loosen the pre-load rings past the threads and allow them to drop all the way off? Seems that would would free up the extra few inches to get the collar off for guys like me that don't own a spring compressor. Is that not advisable?
The ring won't fall down onto the non threaded area, as its actually wider on the non threaded part, so it would just result in the collar bottoming out
Awesome video, made it look easy, I’ll see how I go. Great stuff 👍
Thanks, this was direct and to the point.
Awesome information!! Thanks!
Does it matter which end of the spring goes on top or bottom?
Great video, just what I needed
Great spring compression tool !!
Thanks for this!
I have a CRF 250 L and the rear suspension is too light for my weight. What do you suggest?
How to do with ohlins one
Is it possible to remove the rear spring shocker permanatly? I don't want the rear shocker on the bike anymore, so is it possible to remove it permanatly?
Thanks
My 2018 crf 250 shock is way to soft for my weight I'm 16 stone how do I know what spring I need
Check out race techs website and use the spring rate calculator
I'm just over 100kg (110kg with gear on) what type of spring do I need
If you go to the Racetech website it has a calculator tool that allows to select your bike and rider weight. From there the website will give you a recommendation on what springs to go for front and rear
Hope this helps!
For that KYB shock, can you just loosen the pre-load rings past the threads and allow them to drop all the way off? Seems that would would free up the extra few inches to get the collar off for guys like me that don't own a spring compressor. Is that not advisable?
The ring won't fall down onto the non threaded area, as its actually wider on the non threaded part, so it would just result in the collar bottoming out
Very nice tool
Sunil Ghorpade , Mumbai
22 people lost a finger tip
Guy is high af
Never been in my life my friend.
@@vitalmx ya sure look it brotha
@@vitalmx sorry