How to Replace LBZ Duramax Parking Brake Shoes
HTML-код
- Опубликовано: 23 апр 2023
- Welcome to my latest RUclips video, where we'll be taking an in-depth look at the process of replacing the parking brake shoes on a LBZ Duramax. But before we get to that, we need to finish up the installation of the U-bolts, a critical component of the rear suspension.
Thank you again for your continued support, and I hope you enjoy this video. Please feel free to leave your comments and questions below, and I'll do my best to respond to each and every one of them.
Additional Videos:
Rear Breaks:
Complete Rear Break Replacement for a LBZ Duramax
• DIY Rear Brake Replace...
Product Links Below ⤵️
MERCH:
linktr.ee/diydiesel?fbclid=PA...
Rear Parking Break Shoes:
www.rockauto.com/en/catalog/c...
Shoe Hardware Kit:
www.rockauto.com/en/catalog/c...
Rear Axle Seal Kit:
dmaxstore.com/products/?route...
Rear Axle Bearing:
www.rockauto.com/en/catalog/c...
Film Equipment:
Go Pro Hero 9:
www.bestbuy.com/site/gopro-he...
Media Mod:
www.bestbuy.com/site/gopro-me...
SD Card Upgrade:
www.bestbuy.com/site/sandisk-...
2007 LBZ Duramax Mods:
Truck Mods!!!
DSP5 switch
Ppe Fuel Rail Race Plug
Ppe Ported Fuel Rail Fitting
AirDog165
Kryptonite Lower Bump Stops
Kryptonite Sway Bar End Links
PPE Stage 3 Tie Rods
Kryptonite Death Grip Full Floating Traction Bars
Stainless Fuel Lines
Lincoln Diesel Specialties Sump
Timken Wheel hubs
Powerstop Truck and Tow break kit
Nylon Coated Break Lines
Russel Stainless Braieded Break Lines
Curt Class 5 2" reciver
ARP Head Studs, Gaskets
5"-7" North Spec Built Tip
5" MBRP Exhaust
3" Stainless PPE Down Pipe
PPE Passenger Side Stainless Up-Pipe
Lincoln Diesel Specialties 68mm Turbo
WCfab cold air in-take
WCfab Egr Delete
WCfab Upper Radiator Pipe
WCfab Break Resivor Cover
(Blueberry Frost)
Boost Auto Mirrors
ReconLighting Cab lights
ReconLighting Tail lights
Bushwacker Fender Flares
Rigid Industries Midnight D series Fog Lights
Pod Light Mounting Bracket
Compustar remote start
Auxbeam LED Headlights ( High&Low Beam)
Music:
Epidemic Sound 
Авто/Мото
Great video! Great camera angles and explanations of what your doing. Keep it up!
Thank you! 🤘🏼
Excellent video
I found out after doing one side with the hub off you don't have to pull the hubs to do the ebrakes, I did one side hub off and one side hub on. You do it a few times it becomes really easy.
That’s good to know and a helpful comment for others 🤘
So how would I do it with the hub on?
How many bearings are in that rear hub? 2 or 1?
2
You installed the shoe slack adjuster incorrectly. you’ve got the cog nut on the left side and it should be on the right so the cog ends up in front of the backing plate window. You can see the difference in before and after you took it apart
I wouldn’t say there is a right way, or a wrong way. There is no window on the dust covers in this video. It’s going to operate the same way
@@DIYDiesel the oblong hole directly behind it is the window, typically a rubber plug in place but that seems to be missing.
So had a blow out on the freeway yesterday. Tire blew and the impact sheared off the brake caliper in half along with the parking brake assembly bracket mount. Do you know the part number for that and how I should go a part replacing that.
Oof glad your ok! That can be a scary moment. Unfortunately I do not know that part number. Your best bet is to call Hicksville Auto Recyclers in Ohio they are a duramax graveyard.
@@DIYDiesel can I email you a video of what my truck is doing while in drive? I put the rear end on jacks and i only have the driver rear brakes connected since the passenger side is sheared off. When I brake I have to put it to the floor but the tires in the rear don’t stop they jolt and keep going. Does that mean it’s the differential? I have the video I can send to your email.
@@kingkolt886 if you go to my website diydiesel.shop and do the contact us it will send me an email
why does noone show getting the actuator attached to the cable end around the spring behind the backing plate?
I made a separate video on that because I replaced mine
Where? I don't see it on your channel when i search actuator@@DIYDiesel
What kind of springs are those?
7 + 1 leaf spring pack from SD Truck Springs
How are they with towing?
@@coltonetsitty2631 just towed a 29’ camper this weekend with it. Towed great! I’ll be making a video on it shortly. I don’t recommend them on a daily driver. Someone who goes a lot absolutely, or hauls heavy loads in the box.
always black sweatshirts with a coat of dog hair on them every video haha. u need some fabric softners my man help get that dog hair off in the dryer. hahahahahah great video
🤣🤣🤣 two German shepherds and a new white kitten I always have it on me lol appreciate it!
Why new bearing if your not replacing the race. Should always replace in pairs
So ya i actually replaced it after this video lol I was editing and realized I didn’t replace the race I also did the other one as well.
So ya i actually replaced it after this video lol I was editing and realized I didn’t replace the race I also did the other one as well.
You should breath in the microphone more .
Super painful to watch him not get to the point or ramble on and on