This simple fix can bring your Mainboard back to life MSI X370 Gaming Motherboard repair
HTML-код
- Опубликовано: 21 авг 2024
- Yet another ATX gaming Mainboard, that didnt boot up! This time a little bit easier fix. But this can be applied to a lot of broken boards!
If you have any questions hit me up in the comments!
My Tools:
DDR3 and DDR4 Post code tester (white ddr card): s.click.aliexp... *
Tweezers: de.aliexpress....
Soldering Station AIXUN T3A T245 B Set: de.aliexpress....
JBC tips that i use: C245-906 (bought of a german retailer) , C245-030 (bought of a german retailer) , C245-908 amzn.to/47eHP05 * , C245-752 amzn.to/47BqxtO *
PCIE Post Card: s.click.aliexp... *
Side Cutters: de.aliexpress....
DDR3 DDR4 Data line Tester: s.click.aliexp... *
Pre heater: s.click.aliexp... *
Reball jig: s.click.aliexp... *
needle probes: s.click.aliexp... *
CH341A Bios chip programmer: s.click.aliexp...
Soder Wick: s.click.aliexp... *
Microscope: s.click.aliexp... *
Microscope Ringlight: s.click.aliexp... *
Microscope Arm (used 3D printing to make it work, can provide an STL if needed): amzn.to/3R1hn48 *
Power supply: s.click.aliexp... *
12V to 24pin ATX adapter: s.click.aliexp... *
Components Tester: s.click.aliexp... *
Hot Air: Some Quick 861DW counterfeit
The Flux i use sucks, so dont buy it lol
The Copper wire i use is 0.1mm Enameld wire, link is dead, but the wire wasnt great anyways
Oscilloscope RIGOL DS1054Z amzn.to/3R2aDmE *
Thermal Camera Seek Compact amzn.to/47hGeX6 * (I would check out the infiray P2 Thermal cameras to be honest if i wouldnt have already bought this one!)
Multimeter (cheap one for beginners, that i still use): UEZNIRN IEC61010-1 multimeter
UV light: amzn.to/40L0fD1 *
Links marked with * are affiliated links and i get a small comission from them without you paying extra. (The * is not part of the link)
For any business inquierments:
Xorat.business@hotmail.com Наука
WAIT, you did all that before RESETTING THE BIOS! Thats #1 STEP in any board repair. I Guess the customer may have misdirected you with problems description. Glad you got it going. Great video for newbies!
Time Stamp 14:24 Thanks Saved Me 14 Min.
Nice videos. Really enjoy people sharing their knowledge. I myself trying to learn electronics repair. The thing I would recommend is having the mic louder. I can see you are not a native english speaker and sounds like the mic is muffled. Keep up the good work.
Thank you for the feedback, the audio should be better in the newer videos!
How can you see that he's not a native English speaker? Wouldn't that be hear ? Just joking with you, no offense meant.
Yep, brand new battery worked. Well now I have a spare, since it got replaced with an I9 10850k. Thanks!
Happy i could help!
Very nice video. Well done. Thanks for sharing and good luck with your channel.
I wish you would have made close ups of where you were checking.Thanks for the video.
Its always coils that i am checking, they almost always look the same way on Mainboards!
I was thinking that, Most of that went straight over the top of my head though to be honest!
Hey, very good video. I have one question though. Can you do a video on your connection for the mainboard via your Bench PSU. Wouldn't mind a great explanation of how it was built and how many amps I should set my Bench PSU to.
Thanks and keep up the good work!
Sadly, it's not self-built, but bought on AliExpress. However, I don't mind making a quick video about it. Thank you for the suggestion!
Thank you, because I would have liked to know more about this so that I could use it for my mainboard repairs. For example, how many amps I should set to the +12V. Thank you!
@@MainboardMedic So, tell me what is Aliexpress puchased model was? If you show it, then can look more detailed spec on it. Thank you.
I will soon add a whole list of my tools to my description! RUclips doesnt allow me to post links yet.
@@MainboardMedic If you do that, it will be nice to compare with my tools. Thank you. Have a wonderfull days.
Wish I understood a bit more about what you were doing, I have an ASRock 970 Performance Fatal1ty Motherboard, I’ve done all the normal checks such as changed the CMOS Battery, Reflashed the BIOS and I’m getting Fan Spin but I have No LED Lights lighting up on the Board and No Beeps when a Speaker’s connected though, The CPU does get Hot though, I’ve just ordered a New Multimeter to replace my aging Fluke 73 Mk II Multimeter so hopefully that may help, Good Video though all the same! 🇬🇧
Great job 👏
Thank you for sharing your knowledge. New sub here.
Please help i have problem in motherboard
Pc won't turn on when cpu 8pin connector plugged when i unplugged pc just trun on perfectly i noticed also when i add pcie to gpu fans go crazy it's turning on in high rpm
Help please
Would you please tell what components should i check in mobo
(Motherboard b450 eorus elite v1)
Psu cooler master 700W
check the 12V connector to grounf and to vcore. should be high restistance
15 mins to reset a bios... I do like your test rig though could you explain it? What is the device you've got plugged into the motherboard header?
Its a TL611 PRO, on some boards it can be used to get post codes!
thanks
Wow, I have an x99x I9 5820? that sat 6mo, now mysteriously dead (no anything).
Hello there. I have a problem with my motherboard (i think so).
After reinstalling Windows, everything works, including the Internet and the hard drive via a sata cable. Then I turn off the PC, turn off the power. I wait for half an hour - I turn it on and everything works. I repeat, leave the PC completely without voltage for 2 hours, turn it on - everything works. I repeat once more, now I leave it for the whole night, turn it on. And here the problems begin. It doesn't see the SATA hard drive at all + the network card falls off because it doesn't see Wi-Fi or cable Internet either. What could it be?
My specs: MB - msi b650-p pro wifi (bios ver. 7D78v1C) Cpu - ryzen 7500f Psu - 650 seasonic Dram - kingbank ddr5 Video - 2070super
Have you checked the Bios battery?
@@MainboardMedic Yes some time ago i was replaced the battery with new one
Thanks for the videos. What adapter are you using for the PSU to 24-pin ATX + CPU?
Its written in the description under "12V to 24pin ATX adapter". That thing originally is made for mining, but was modified by me.
There will be a video about the tools i use in the future.
One of my b365 mobo cpu shoket pin burnt due to bad cpu can it be repaired and last long after repairing?
Hi ! Please can you tell me how do you generate the 3.3V on the 24 pins cable via the power supply ? Thanks for knowledge sharing
Its generated by the adapter itself. Just like the 5V and -12V or the 5vsb. The adapter only takes 12V and converts them itself.
How about a bios update to the latest version? I have a Asus Strix X370-F Gaming with the Dram LED on. I have tried different slots and different ram with no change. No video and no post or change in diagnostic LED sequence. Just solid lit Dram LED. Have you experienced this before?
In that case i would try the DDR tester, to see if the Data lines are present or not!
tldw: remove cmos battery
crank up the volume!!!, my sound in max and cannot hear you over the rain.
so i have a x370 mobo that dose this weried stuff where it will post some time but if i shut it off it wont post it just hangs there no lights no display but if i shut it off take the ram out turn it on then back off then ram back in it post any idea why ?
There is a lot, what could be wrong here. I would start with flashing the bios. There could be damage with the SIO. Maybe other components would also be nececcary to see if it really is the board!
@@MainboardMedic its a msi x370 gaming pro carbin but see it will turn all the debug light are off form time to time it frezzes on cpu orthers it will just post
@@MainboardMedic i also updated the bio and it posted no issues but i was thinking it was a bios issue so i updated it to the newest bios for the mobo
@@fxgamer-11yt What voltages does your battery have?
Hi good job. may i know where i can buy ur 24 socket small unit?
There will be a Video on that soon! There is a link in my video descritption!
Its an 12V to 24 pin adapter. Often refered to Mining adapter.
Me again :D, well I need one advice. I got motherboard and 12v cpu rail is shorted. I will try CPU on new motherboard, if CPU is shorted can he damage new board?
Yes it can! I had that happen to me before. The VRM wont instantly blow up, but it will get really hot really fast and can die as a result! But for quick testing should be fine to see if it survived or not!
@@MainboardMedic Thank you.
Hi on the powersupply you set 12v how much do you put the amps on.
I just leave the amps unlimited. This power supply can handle up to 10A.
Ok will the pc motherboard be ok with the 10A just for the job you were doing@@MainboardMedic
@@Heinrich.Fourie With low power CPU´s it will. For stress testing you will need more then 10A. I Am using a 1200W 12V power supply for stress testing.
can you repair my x570 motherboard?
Yes i can!
@@MainboardMedici have x570 e ging too ,how can you help me to revive it please 😢
Hi,
I hope you'll see this post and maybe you can give me a lead? :) I have an MSI B350 pc mate motherboard that gives me a red light cpu all the time. I have tested everything possible (clearcmos, new cpu, test with another power supply, another ram etc...) without success. I came across this guy's video: ruclips.net/video/PG2H2bUzJck/видео.html. His technique worked for me, but I have to do it systematically if I want the motherboard working. I took the opportunity to update the bios, without success.
Obviously the problem is with the CPU power supply, but do you have any clues? Thanks in advance.
I have seen this before. This seems to have do to with the reset line on the board. Sadly i dont know an exact fix for this. Did this occur after a system or component change? Because i would expect a component to be missing or maybe dodgy on the board!
Thanks for your reply! Unfortunately i have no idea, I bought the card in this condition. I'll take the time to look at the card in detail and see if I find anything. I'll come back to you if I ever find a solution. Thanks again!
This is not worth even watching for the entertainment value. Your head was in the way, It's hard to understand your voice. I didn't see even half of the contacts you were checking. You didn't explain what you were looking for. For all I know you didn't know anything you were doing. You are not teaching, you are showing off and you didn't do a very good job at it either. Keep trying but next time expect people to actually learn something from your videos. You didn't reveal any of your trade secrets.