Dimensions: Fountain basin (Octagon): Octagon each side length: 30 cm, Height: 13 cm, Water distribution unit (the topmost part of the fountain): Height: 8 cm, Diameter: 8 cm, Tier-1 (small round disk); Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm, Distance between tier 1 and tier 2: 18 cm Be creative in this area, try to make different shapes. Tier-2 (Big round disk) Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm, Distance between tier-2 and Basin base: 28 cm, Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce more shapes in between and make it more attractive)
Is the base made of Styrofoam? It’s beautiful just what I was looking for elegant, beautiful but I don’t think I could actually do it myself but just was wondering is that bass made of Styrofoam.
Very good idea, best way to recycle polystyrene, bet the birds love it and it looks great in the garden, with this idea you can make it with lots of different sizes, styles or colours. Thankyou for sharing your inspirational videos 😊
Very beautiful. Fell in love with this fountain. Where does one get thermocol? Just starting to work with cement myself. Hope yo graduate to this. Again very beautiful.
Las mas bella fuente que he visto!. Lo felicito por su gran inteligencia e imaginacion. Que Dios lo bendiga!! muchas gracias por compartir... Y Por cuanto la vederia??
White cement will take around 2-3 days to dry completely. You will have to mist/spray water every 2 hours for better curing during this period. I turn on my fountain 1-2 hours everyday, and its almost 6 months now and working good.
It looks very nice but ignores basic fountain rules. The internal base should be at least twice as wide as the feature is tall, otherwise you will loose water.
No. White cement is different from plaster of Paris. Both of them looks almost similar but their composition varies i guess. I have tried both POP and White cement in my crafts and found that white cement crafts are very sturdy and strong compared to POP.
I did not add any waterproof agent. I have masked all the edges of the fountain basin (octagon) with a masking tape before applying cement. If you want a more sturdier model, you can use a cotton cloth instead of a masking tape on the edges and then apply cement. Water did not leak anywhere in my model. But there in no harm in adding a waterproof agent if you want to.
Are you talking about the masking tape? Yes, you can use masking tape to seal the edges before applying cement. Cotton cloth will be even better than a masking tape.
Fountain basin (Octagon): Octagon each side length: 30 cm, Height: 13 cm, Water distribution unit (the topmost part of the fountain): Height: 8 cm, Diameter: 8 cm, Tier-1 (small round disk); Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm, Distance between tier 1 and tier 2: 18 cm Be creative in this area, try to make different shapes. Tier-2 (Big round disk) Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm, Distance between tier-2 and Basin base: 28 cm, Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce mode shapes in between and make it more attractive)
Fountain basin (Octagon): Octagon each side length: 30 cm, Height: 13 cm, Water distribution unit (the topmost part of the fountain): Height: 8 cm, Diameter: 8 cm, Tier-1 (small round disk); Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm, Distance between tier 1 and tier 2: 18 cm Be creative in this area, try to make different shapes. Tier-2 (Big round disk) Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm, Distance between tier-2 and Basin base: 28 cm, Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce more shapes in between and make it more attractive)
Dimensions:
Fountain basin (Octagon):
Octagon each side length: 30 cm, Height: 13 cm,
Water distribution unit (the topmost part of the fountain):
Height: 8 cm, Diameter: 8 cm,
Tier-1 (small round disk);
Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm,
Distance between tier 1 and tier 2: 18 cm
Be creative in this area, try to make different shapes.
Tier-2 (Big round disk)
Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm,
Distance between tier-2 and Basin base: 28 cm,
Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce more shapes in between and make it more attractive)
22
Where did you bring the thermaco?
Is the base made of Styrofoam? It’s beautiful just what I was looking for elegant, beautiful but I don’t think I could actually do it myself but just was wondering is that bass made of Styrofoam.
Excellent Job
Very Very Nice 👍
Thanks for sharing
Thank you too
Lovely work very good
Many thanks
Красивая музыка и красивый проект!
Awesome ♥
Thanks 🤗
Красивая музыка и красивый проект
Спасибо
Wow, would have never guess it started off as foam board. Its beautiful creation.
Thanks so much 😊
Of all models I have seen it it superb
Which I will prepare and keep it in my portico
Great 👍
Gorgeous and creative
Thank you! 😊
Bellísima fuente!! Me encantó, felicitaciones!! Un excelente! trabajo y detalles.
muchas gracias 😊
Best fountrin on youtube
Thanks....
Thank you it's beautiful 😊💝👌👏👏👏👏💐💐💐
Most welcome 😊 Thank you too
Hey Man, gotta give you credit that's tight !
Thanks a lot
Very good idea, best way to recycle polystyrene, bet the birds love it and it looks great in the garden, with this idea you can make it with lots of different sizes, styles or colours. Thankyou for sharing your inspirational videos 😊
You are welcome & Thank you too!😊
Beautiful piece of work thankyou 🤗👍😇
You are so welcome 😊 Thank you too!
Amazing ❤️❤️❤️❤️❤️❤️
Thank you! Cheers!
Very beautiful. Fell in love with this fountain. Where does one get thermocol?
Just starting to work with cement myself. Hope yo graduate to this. Again very beautiful.
Thermocol iwill be available in Hardware stores and stationery. Thermocol is also banned in few places. Thanks for the visit.
Wow great job my friend. I will make much bigger base but for a tutorial vid you did fabulous. So impressed. Subscribed from Texas!
Yes you are right, the base should have been bigger. Thanks for your visit, comment and sub!
Bravo!!!! It's so beautiful 😊👏👏👏👏 Your're a talented. man. I look forward to look at your other videos.
Thank you so much 😀
Las mas bella fuente que he visto!. Lo felicito por su gran inteligencia e imaginacion.
Que Dios lo bendiga!! muchas gracias por compartir...
Y Por cuanto la vederia??
muchas gracias.....
Thank you very much for the visit and your comments. 😊 I just made a fountain to replace a bird bath in my garden. Thanks again 😊😊
I definetly recommend you making a larger pond, it splashes out too much. Otherwise, great fountain and great video! Greetings from Spain!
Yes, you are right 😊 Will take care of this in my next fountain. Thanks for the visit. Have a great day.
Yes and no a different pump with a slower flow can serve well, but yeah bigger fountain can be made.
I like it
Lovely water fountain...👍👍👍👌👌
But when water flow on by the submersible pump , water flow out of the tray!!! It will be controlled then much better
No Response!!
Lovely
How long does the white cement take to dry and get sturdy?? Does it dissolve by time in stagnant water??
White cement will take around 2-3 days to dry completely. You will have to mist/spray water every 2 hours for better curing during this period. I turn on my fountain 1-2 hours everyday, and its almost 6 months now and working good.
Hi it’s amazing I’ll try making it soon but just a question will the thermacol inside melt over time?
No, it does not melt. The fountain shown in the video is still doing great.
It looks very nice but ignores basic fountain rules. The internal base should be at least twice as wide as the feature is tall, otherwise you will loose water.
Yes, you are right. The base should have been bigger (realized this only while checking the fountain with water). Thanks for your comment and visit.
Loose means not tight. *lose water
This white cement you used...is it what we in the states would call Plaster of Paris (calcium sulfate hemihydrate) ?
No. White cement is different from plaster of Paris. Both of them looks almost similar but their composition varies i guess. I have tried both POP and White cement in my crafts and found that white cement crafts are very sturdy and strong compared to POP.
I was wondering what kind of cement you used for this project?
It's called JK white cement. Just like POP, but a lot stronger than POP.
Where can you buy styrofoam in sheets like that?
These styrofoam sheets are generally used for packing. You may get them in hardware stores or sometimes in stationeries too.
Excellent video! 👌Is it definitely white cement as opposed to plaster? Any particular make? Thanks 👍
Yes, it is white cement. I have used "JK white cement". Thanks for the visit 😊 and have a great day.
هذه الأعمال كلها مكملة للطبيعة
Thanks
Hi.... Need to add any polymer mix with white cement????
No. I did not add any.
You don't need to add waterproof agent otherwise there will be leakage?
I did not add any waterproof agent. I have masked all the edges of the fountain basin (octagon) with a masking tape before applying cement. If you want a more sturdier model, you can use a cotton cloth instead of a masking tape on the edges and then apply cement. Water did not leak anywhere in my model. But there in no harm in adding a waterproof agent if you want to.
wowwwwe
Can we use tape to make polygon
Are you talking about the masking tape? Yes, you can use masking tape to seal the edges before applying cement. Cotton cloth will be even better than a masking tape.
I like this . But it is difficult to made at home by me.
I need base cutting video please
Could you please add a list of the dimensions and sizes of all the pieces?
Fountain basin (Octagon):
Octagon each side length: 30 cm, Height: 13 cm,
Water distribution unit (the topmost part of the fountain):
Height: 8 cm, Diameter: 8 cm,
Tier-1 (small round disk);
Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm,
Distance between tier 1 and tier 2: 18 cm
Be creative in this area, try to make different shapes.
Tier-2 (Big round disk)
Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm,
Distance between tier-2 and Basin base: 28 cm,
Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce mode shapes in between and make it more attractive)
Where you mentioned the size
Fountain basin (Octagon):
Octagon each side length: 30 cm, Height: 13 cm,
Water distribution unit (the topmost part of the fountain):
Height: 8 cm, Diameter: 8 cm,
Tier-1 (small round disk);
Height: 6 cm, Diameter: 21 cm, Lip height: 2 cm,
Distance between tier 1 and tier 2: 18 cm
Be creative in this area, try to make different shapes.
Tier-2 (Big round disk)
Height: 8 cm; Diameter: 30 cm; Lip height; 2 cm,
Distance between tier-2 and Basin base: 28 cm,
Total height of the fountain: 71 cm (You can alter the size as per your needs and introduce more shapes in between and make it more attractive)
Very awesome 😄😄👌👌.
But u did not show clearly how to make.make another video to show clearly plzzzz
Ok 😊
⁹