I've been using this method for awhile now and just now had a client who went to import the tp3 into their dozer. The dozer will load it up but then when it gets into the grading areas it freezes and shuts down. Any clue why this would be happening?
I would be curious to see the density of the triangulated surface. If it is really dense if can lock up and shutdown the software, especially on older hardware like the GX-60s
@constructiontechnologypart2040 it's for mass grading so my initial thought was the file was just too large but we've uploaded files double the size with no issues but yes maybe the density has something to do with it. I've tried clipping down the surface into three segments with no luck either so kind of at a standstill.
@@fixanythingsavemoney you're welcome to send me the .tp3. I'd take a look at it when I have a minute and see if I have any suggestions support@myconstructiontechnology.com
Can I have few ttm files where to download and do we have free software to open the ttm files and others Could you please provide me some ttm files with the same location.
You must purchase Trimble Business Center. The free downloads do not offer any of the features you need to do anything. If you can find an older version like V3 or V4 they typically have the necessary features unlocked . I will see if I can locate a good version and post a download link.
I use Trimble at work but i personally own a top rover with pocket 3d. I tried to take all my Trimble files and convert them but when I select the dxf from my thumb drive nothing shows up in Office3D. A lot of the times i get “import failed: invalid format”. Why isn’t my lines work or surface showing up when i bring them into 3D-Office?
Most likely whomever is producing the .dxf is exporting it as a newer CAD file. I typically stick with 2014 and it seems to work well with older stuff. I noticed around 2019 that some of the newer CAD wasn't well liked by the older software like Office 3D.
@@littlenel17 7 months later but Office 3D was discontinued by Topcon. They want people to use Magnet now, which as far as I know doesnt have a free version.
Yeah I have TBC 5.1 and couldn't save as an autocad file and bring it into office 3d, It would be blank and not load anything. But you can open both linework and tin autocad files in autocad and hit export and save both files as 2007 dxf and office 3d will load them. Yeah I didn't want to have 5.1 and 4.1 Trimble business center just to convert it. Hope this helps more people with the same problem. It's like TBC was trying to stop people from using topcon dozers with Trimble software.
I've been using this method for awhile now and just now had a client who went to import the tp3 into their dozer. The dozer will load it up but then when it gets into the grading areas it freezes and shuts down. Any clue why this would be happening?
I would be curious to see the density of the triangulated surface. If it is really dense if can lock up and shutdown the software, especially on older hardware like the GX-60s
@constructiontechnologypart2040 it's for mass grading so my initial thought was the file was just too large but we've uploaded files double the size with no issues but yes maybe the density has something to do with it. I've tried clipping down the surface into three segments with no luck either so kind of at a standstill.
@@fixanythingsavemoney you're welcome to send me the .tp3. I'd take a look at it when I have a minute and see if I have any suggestions
support@myconstructiontechnology.com
do you have to manually type the control in or could you import the Trimble .dc file?
Can I have few ttm files where to download and do we have free software to open the ttm files and others
Could you please provide me some ttm files with the same location.
can't seem to find a link to Trimble Business Center. Is this something I have to buy?
You must purchase Trimble Business Center. The free downloads do not offer any of the features you need to do anything. If you can find an older version like V3 or V4 they typically have the necessary features unlocked . I will see if I can locate a good version and post a download link.
Could you share the LSS toolkit in google drive? can't download
You can download from this link.
www.dtmsoftware.com/LSS-Toolkit
I use Trimble at work but i personally own a top rover with pocket 3d. I tried to take all my Trimble files and convert them but when I select the dxf from my thumb drive nothing shows up in Office3D. A lot of the times i get “import failed: invalid format”. Why isn’t my lines work or surface showing up when i bring them into 3D-Office?
Most likely whomever is producing the .dxf is exporting it as a newer CAD file. I typically stick with 2014 and it seems to work well with older stuff. I noticed around 2019 that some of the newer CAD wasn't well liked by the older software like Office 3D.
@@ctpusa1 oh ok that must be it then. There is no way around it then? There is no version of 3D Office that supports newer cad files?
@@littlenel17 7 months later but
Office 3D was discontinued by Topcon. They want people to use Magnet now, which as far as I know doesnt have a free version.
@@tylercase3199 better late than never…thanks for that
Im looking to create a file for the LPS GT1000 series but cant seem to upload my gc3 file or linework, surfaces etc, any thoughts?
What are you trying to upload it to? Data collector or computer?
Yeah I have TBC 5.1 and couldn't save as an autocad file and bring it into office 3d, It would be blank and not load anything.
But you can open both linework and tin autocad files in autocad and hit export and save both files as 2007 dxf and office 3d will load them.
Yeah I didn't want to have 5.1 and 4.1 Trimble business center just to convert it.
Hope this helps more people with the same problem. It's like TBC was trying to stop people from using topcon dozers with Trimble software.
I've seen that is well. I would say stick with anything 2014' and older and I seem to avoid issues with import.
3D office is free?
Yep
drive.google.com/file/d/1I5EDNm_y6dFXS9RIRL4_HOtaveZVr43e/view?usp=sharing
gatta fix the volume on your mic brother
Yep, old video. New ones have been much better. I've tried to post edit it, but have not been successful.
why are you speaking so low? turn up the volume on your end ffs.
I have tried, for some reason the mic didn't pick it up. When I get time I will most likely remake.