The clearest and steadiest tutorial I have watched. Organised easy to watch and in no way rushed. I am new to drones and this clearly showed me what IMU is for and how to Calibrate the Mini to achieve success. 5 Stars!
I don’t even want to tell you what I was doing to “calibrate vertically” but after watching this video i’m having an OMG moment that is making me wonder if i also have simple movements like the macarena dance wrong also. so embarrassing. thank you for making this.. now i’m ready to make more travel videos for youtube!😳
Since I already own 2 DJI drones, I am completely familiar with these two processes, BUT this is great information for a new drone owner. BOTH are necessary for proper drone operation. Thanks for the concise explanation in this video.
Thank you. I was completely doing the 2nd part of the calibration wrong. I had been rotating the MINI as if it were doing a summersault. I didn't even know about that 3rd calibration. Well done.
I did the same thing the first time. Now I know why it's asking for IMU calibration. Like he said in the video. Everytime you put the drone in a car to go flying it needs to have IMU calibrated. So now have to find portable table to carry around I guess. Finding a flat surface in the middle of a field is pretty hard.
Great tutorial Billy. Another idea might be to put some small elastic bands around each arm to hold the propellers in place during calibration also keep your mobile phone away from the drone during the calibration. Happy flying.
Good video; thank you. Right to the point. It kills me when someone takes 10 minutes to tell you what their Grandma did last year for Christmas, before imparting the info the title suggests.
Indeed, I hate those video extending morons with a passion, I refuse to watch them, they'll get zero ad revenue from me! Honestly I'd like to Jay and silent Bob strikes back those clowns like at the end of the movie, hahaha
Can you make a video of the proper way to pack up your mavac mini? Im always a little worried that i am folding up the propellers the wrong way and putting unnecessary stress on the propellers and engines. Also, your channel is very informative. Thanks for making these videos!
Thank you for the video. I would just suggest that when you are going through the compass calibration that you mention what direction you are rotating the drone. It appears that during both horizontal and vertical, you were rotating clockwise. If it doesn't make a difference, then that should be addressed also.
DJI Mini. Flashing Red, Page 12 manual says IMU. Found this video. Yes I crashed my Mini. I couldn't get it to connect UNTIL I started to rotate the drone and then it connected and followed Billy's instructions WOAH, fixed. Thank Goodness. Other videos said just wait for update lol, wait forever! Thanks for the video mate.
just came in from a project where the app said I needed to recalibrate both so I attempted to so however I was standing only a couple feet from my vehicle, I tried several times and got a failure each time. Completely frustrated I came back to the office and found this video, I did not know not to stand next to the vehicle. 20 mile round trip so now my ignorant ass gets to make the trip again.
I was doing the compass calibration incorrectly. That's probably why each time I fly it tells me it needs it. Also the aircraft is unstable in hover. It tends to want to yaw slightly when it should be still, and this morning as I was bringing it down over the porch for a landing it lurched forward and crashed into the door. I will do both compass and IMU, IMU having never been done on this since I unboxed it. Thanks for this, Kyle.
Billy. The screws have lock tight on them. Basically single use, unless one has more lock tight. Lock tight binds/glues with friction. Keep up the excellent work on the videos. Still waiting on mine to come in the mail.
I noticed that in the IMU calibration when you place the drone on its right side it leans over to rest on the front but when you do the left side it remains upright. I know that on a perfectly flat surface the mini will not remain upright when on its side, it wants to lean over. Does it matter it it is leaning over or upright in the calibration?
I tried to calibrate my compass it said it failed. I assume while I was spinning my drone I was holding my controller with my left hand to view the outcome. I think I need to stand away from my controller and use the green light indicator. Hope this works on my next flight
You answered my question about the props on in IMU calibration. I was wondering about removing it like I do with the Spark. It's good to know that you can keep them on, because that would be too much work in screwing it back- Thanks Billy.
Great stuff! This is gotta be one of the most important tips for anyone learning to fly drones for the first time! And a Nice reminder for us drone veterans. I’ve done some reviews on the mavic air, looking forward to trying out the mini!
Just a note for beginners, You will beed to calibrate Low Cost Beginner Drones everytime you start the drone, however, most of all these DJI and Professional Drones do not need a Calibration as they have memory systems and remember the factories calibration, or they might need just one calibration when you first get it.
During the IMU calibration it's strange that the drone doesn't actually lean on its side, perfectly vertical or "Plumb". It tips until the motor touches the flat surface. It almost tips over onto its back. Don't hold it Plumb with your finger. It's suppose to be that way.
So it's normal for one of the two sides to be 'angled' when laying down on it's own? On one side my mavic mini lays perfectly flat and parallel to the table. On the other it's at an angle like in this video. I'm not sure what to do
Hi.. thanks for the information...as u mentioned that compass calibration also required after travelling with drone. I just travelled with drone and now I am facing unstable hovering issue, pls suggest?
Thank you for this video! It actually worked! I was getting stuck at 95% and the instructions were not clear about the rotation piece. Thank you, thank you, thank you!
You probably dont care but does anybody know a trick to get back into an instagram account..? I somehow lost the login password. I appreciate any help you can offer me.
@Ralph Alaric I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will reply here later with my results.
Hi Billy, i have some weerd stuff happening. flying indoors big sportshal and the Vision Positioning is not working all the time. at low alttitude it drifts and is not hovering nice above 2 meters it wil hover correct. have you any suggestions ? or had it your self ? or can it be the floor type ? Tnx Robin Lissenberg The Netherlands BTW love your video's verry good explaind all.
Calibrating compass was easy but the IMU seems stuck with the phone screen showing 95%. What to do? The drone is flashing green fast. Great I just installed the prop guard. So I uninstall the guard. What do you call near to metal? A foot or a yard? maybe this was filmed before the update but now the phone screen shows you how to turn it and when. I finally make it work after 30 min. thanks, you were some help though.....every little snag happens and then...shutdown Overheating!! This baby is heat sensitive!
Fixed the error for the mavic mini when it says “check gps settings or calibrate mobile phone compass”. I thought it was about satellite range and spread, blah blah. It was a location service iPhone security issue. Go to Settings>>Privacy>>Location Services>>DJI Fly App>>Always. For some reason when you set it up the DJI fly app and asks if it can get permissions to use your photo, location services... it changed its security setting for location services to ask. No wonder I kept getting the gps error even at multiple locations. I hope this helps you guys. Took me a day to figure out 😊
What’s your thoughts on making the drone as cold as possible before performing an IMU calibration. I understand that way it helps with a quicker start up at all temperatures.
Where you say don't calibrate near any metal, this might sound a stupid question but my shoulder is held together with metal plates and pins so could this affect the calibration.
Just ordered a Mavic Mini. Looking forward to watching your videos. Question.... Is there a way using the app to post videos directly to online ie: RUclips or FB ?
I went to fly in a field and the fly app prompted for gyro calibration. I did the calibration all wrong. The vertical rotation I messed up. Flew ok till I got criticala low battery warning. Made it back and landed. This was my first long range flight and had just done a Dronelink flight plan, which worked almost flawlessly . Dronelink didn't prompt for calibration. When I decided to fly the drone manually with the Fly app it prompted for gyro. I have a question. Isn't it important to do the IMU on a level surface ? Short of carrying a table around what can you do to make sure you have a level surface ?
Yep I had a minor boo boo so that explains why my drone was leaning to one side in the wind and the horizon was off a bit. I'll have to try that out very informative.
Hi I hope you can help me out with this one. I calibrated my Mavic Mini and took off. About a minute in to my flight, a message pops up saying "Compass Calibration Required". This is not all the time, but when it happens, should I be concern and land my drone as soon as possible?
Hey Kyle, good video dude. I’m a long time subscriber but find myself with a question that possibly you can answer for me. Do you have any videos on how to tighten up your control sticks on the Mini 2? Basically the right stick, my movements are sloppy and I would like to tighten them down with more positive stick control.
While doing IMU calibration and placing my mavic mini on one side, it lays perfectly flat and parallel to the table but on the other side it lays at an angle. Is this normal, if not should I be holding it flat on the angled side?
I heared it does not have live compass and imu interference? I wanted to Sellin my spark for the mavic mini but as i know from my spark you cant Trust the app to warn you when a calibration needs to be Done.
Hi Billy, I hope you can help me, i own a Mavic Mini when i set the distance slider to full length the Drone only goes 165 feet away and i dont"t seem to be able to get it any further. What do you think is the matter, hope you can help. Thank you.
Is there a reason why the App would prompt me to calibrate my compass EVERY TIME before flying? I did watch your video and I read that it could be after every car ride. However, If i heard you correctly, you also said that you have not calibrated your drone very often (unless the app prompts you to). I don't know if this could be something wrong with my Mini or something. What do yall think?
today i noticed that my drones response time to the control input was extreamly laggy i would push forward on the controls and the drone wouldnt respond for about 15-30 seconds and it was only around ten ft from me could the compass or imu being miscalabrated cause this to happen?
did u experienced RTH in sideways position?! i mean when returning home started normally the drone elevates then it will turn 360 degree facing the home point.,my mini 2 it only turn sideways and returning home on sideways position..i already tried to calibrate the IMU and Compass but still d same issue..hope u help me on this bro
I crashed and broke 5 blades; I replaced all 8, because those not broken were scratched. When trying to take off and hover, the drone lifted about 2ft and flew backwards into a snow bank. No props were broken so I tried again and this time it went up 3-4ft and then full speed backwards until it hit a taller snow bank. Will Calibrating the Compass and IMU fix this?
Hey billy I just got my mavic today I did all the software updates required and also the compass and imu calibration , I took it out for a flight and notice that my screen kept saying “imu altitude error” ? Should I do the imu calibration again? Pls help thanks again
Another video about calibrating the IMU put out on the same date (Nov 10) by Drone Valley has the arms of the drone extended and the graphics on the DJI app have them extended also and on your DJI app the arms are closed. There's also a difference in how the compass is calibrated horizontally and vertically. Strange. His horizontal and vertical positions are different than yours. I calibrated the compass on a drone I have the way you do but drone valley's horizontal and vertical are different. I'd like to know what's what.
I have a magic pro and I am having problem calibrating the IMU , it just about finishes then about the end of it , it's just stays put and doesn't move I need help-
Hey, Just bought it. Not able to imu calibrate error 30055 with S20 Plus. Any suggestions..? Did you find any same issue with device. Plz help me with this. Tried from last 2 days. I have tried with apple iphone 7 plus. The last calibration which you mentioned thats not working. Unable to start this via phone button. Please help me out
Which is correct fly app for android phone.s as I have tried the rainbow app but cant get to stage 2 the code on the box I think is for apple phones can anyone show me correct fly app to download as I've had the mavic mini 2 weeks now and been unable to fly it because I dont know which app is best used with mavic mini drone thanks
Billy, quick question for you. Got my fly more combo over the weekend. In doing my part 107 registration as I’ve done with my P4P, I used the serial number on the box, which matches the serial number inside the battery compartment. Today after setting up the Fly app, I noticed the app automatically shows me a totally different aircraft serial number. Is this the case for yours too? Thanks.
Thanks Billy. I searched the DJI forums and found others have the same issue. Someone reported the following: “The S/N on the box and the battery cover should be the same. The aircraft S/N in the app will be different. I was concerned too and DJI told me that the S/N on the box is the one that needs to be registered when activating DJI Care Refresh.” Maybe a bug with the app? We’ll see if this gets corrected in future firmware updates. Thanks and keep up the great videos.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
The clearest and steadiest tutorial I have watched. Organised easy to watch and in no way rushed. I am new to drones and this clearly showed me what IMU is for and how to Calibrate the Mini to achieve success. 5 Stars!
I don’t even want to tell you what I was doing to “calibrate vertically” but after watching this video i’m having an OMG moment that is making me wonder if i also have simple movements like the macarena dance wrong also. so embarrassing. thank you for making this.. now i’m ready to make more travel videos for youtube!😳
Were you also making it do a flip? 😂
@@bassboy130 maybe. maybe not. and maybe yes.
Haha! I just realized I have been doing this wrong too - I was making my drone do a backflip.
I did the same thing and it never successfully calibrate. I almost crash my drones into a swimming pool that is why I’m here now 😂
@@bassboy130 my dad did this
Since I already own 2 DJI drones, I am completely familiar with these two processes, BUT this is great information for a new drone owner. BOTH are necessary for proper drone operation. Thanks for the concise explanation in this video.
Billy well done on a critical step in crash prevention!!! I just received my first mini and it took a bit to find a calibration video. Thanks pilot!
Thank you. I was completely doing the 2nd part of the calibration wrong. I had been rotating the MINI as if it were doing a summersault.
I didn't even know about that 3rd calibration.
Well done.
I did the same thing the first time. Now I know why it's asking for IMU calibration. Like he said in the video. Everytime you put the drone in a car to go flying it needs to have IMU calibrated. So now have to find portable table to carry around I guess. Finding a flat surface in the middle of a field is pretty hard.
Great tutorial Billy. Another idea might be to put some small elastic bands around each arm to hold the propellers in place during calibration also keep your mobile phone away from the drone during the calibration. Happy flying.
Good video; thank you. Right to the point. It kills me when someone takes 10 minutes to tell you what their Grandma did last year for Christmas, before imparting the info the title suggests.
Indeed, I hate those video extending morons with a passion, I refuse to watch them, they'll get zero ad revenue from me! Honestly I'd like to Jay and silent Bob strikes back those clowns like at the end of the movie, hahaha
Can you make a video of the proper way to pack up your mavac mini? Im always a little worried that i am folding up the propellers the wrong way and putting unnecessary stress on the propellers and engines. Also, your channel is very informative. Thanks for making these videos!
Brandon Kincer DONT be worried, just how they place it is right
Thank you for the video. I would just suggest that when you are going through the compass calibration that you mention what direction you are rotating the drone. It appears that during both horizontal and vertical, you were rotating clockwise. If it doesn't make a difference, then that should be addressed also.
DJI Mini. Flashing Red, Page 12 manual says IMU. Found this video. Yes I crashed my Mini. I couldn't get it to connect UNTIL I started to rotate the drone and then it connected and followed Billy's instructions WOAH, fixed. Thank Goodness. Other videos said just wait for update lol, wait forever! Thanks for the video mate.
Why do you spin the drones clockwise when the prompt says to spin it counterclockwise?
Mine was drifting around and did what you said and it worked great, flies very stable now thanks
thank you so much for the help because of this we finally flew the bird after 5 weeks
Funny, out of all the videos I've seen this is one of the few that mention the IMU. Thanks for this walkthrough.
Seems just like previous DJI drones, the process is pretty simple. Exactly as you said, stay away from metal objects! - especially the car.
just came in from a project where the app said I needed to recalibrate both so I attempted to so however I was standing only a couple feet from my vehicle, I tried several times and got a failure each time. Completely frustrated I came back to the office and found this video, I did not know not to stand next to the vehicle. 20 mile round trip so now my ignorant ass gets to make the trip again.
I was doing the compass calibration incorrectly. That's probably why each time I fly it tells me it needs it. Also the aircraft is unstable in hover. It tends to want to yaw slightly when it should be still, and this morning as I was bringing it down over the porch for a landing it lurched forward and crashed into the door. I will do both compass and IMU, IMU having never been done on this since I unboxed it. Thanks for this, Kyle.
Billy. The screws have lock tight on them. Basically single use, unless one has more lock tight. Lock tight binds/glues with friction.
Keep up the excellent work on the videos. Still waiting on mine to come in the mail.
Awesome video👍👍👍. Can you also do a setup video to show how to connect the aircraft with the app?
I noticed that in the IMU calibration when you place the drone on its right side it leans over to rest on the front but when you do the left side it remains upright. I know that on a perfectly flat surface the mini will not remain upright when on its side, it wants to lean over. Does it matter it it is leaning over or upright in the calibration?
I was looking for that answer too, just got the Mini 2 SE, so does it make a difference?
I tried to calibrate my compass it said it failed. I assume while I was spinning my drone I was holding my controller with my left hand to view the outcome. I think I need to stand away from my controller and use the green light indicator. Hope this works on my next flight
Can you calibrate the IMU indoors or is it better out in the field like the compass?
Can you calibrate imu indoors?
You answered my question about the props on in IMU calibration. I was wondering about removing it like I do with the Spark. It's good to know that you can keep them on, because that would be too much work in screwing it back- Thanks Billy.
You got it!
Great stuff! This is gotta be one of the most important tips for anyone learning to fly drones for the first time! And a Nice reminder for us drone veterans. I’ve done some reviews on the mavic air, looking forward to trying out the mini!
Just a note for beginners, You will beed to calibrate Low Cost Beginner Drones everytime you start the drone, however, most of all these DJI and Professional Drones do not need a Calibration as they have memory systems and remember the factories calibration, or they might need just one calibration when you first get it.
Hi Billy, so when calibrating the Compass, this is done Outside? and when calibrating the IMU this can be completed inside? Is that correct? Thanks
so helpful thx i wanted to know how to calibrate the compass, and you showed the IMU too, awesome video bro
Thank you so much!!! My "Mini SE" was so unstable. IMU calibration was the problem! Greetings from Chile!
finally, we only have to follow the pictures on the screen.. lol.. and that's was not what I was looking at ! Thanks a lot !
Do you have a video on how to calibrate the Compass on the RC ?
You and Drone Valley need to compare notes on how to do the compass calibration. :-)
Got my pre-ordered Mavic Mini Fly More Combo TODAY from Best Buy!
I noticed the Drone Valley difference too...very confusing for first timers...
Yeah, I agree, they say totally different procedures on setting up your device for a first flight.
@@rogermcnorton6119 even the official mavic mini manual has the illustrations for compass calibration in wrong order!
At last no faff just good straight forward instructions nice. Thanks
Just to be clear, you calibrate both outside and not inside your home?
During the IMU calibration it's strange that the drone doesn't actually lean on its side, perfectly vertical or "Plumb". It tips until the motor touches the flat surface. It almost tips over onto its back. Don't hold it Plumb with your finger. It's suppose to be that way.
So it's normal for one of the two sides to be 'angled' when laying down on it's own? On one side my mavic mini lays perfectly flat and parallel to the table. On the other it's at an angle like in this video. I'm not sure what to do
Hi.. thanks for the information...as u mentioned that compass calibration also required after travelling with drone. I just travelled with drone and now I am facing unstable hovering issue, pls suggest?
Thank you for this video! It actually worked! I was getting stuck at 95% and the instructions were not clear about the rotation piece. Thank you, thank you, thank you!
You probably dont care but does anybody know a trick to get back into an instagram account..?
I somehow lost the login password. I appreciate any help you can offer me.
@Hugo Cristiano instablaster =)
@Ralph Alaric I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now.
Seems to take quite some time so I will reply here later with my results.
@Ralph Alaric it worked and I finally got access to my account again. Im so happy:D
Thank you so much you saved my account !
@Hugo Cristiano happy to help :)
This is really useful,. My drone itself went ahead today and crashed, what should i do plz reply my question ???
Hi Billy,
i have some weerd stuff happening.
flying indoors big sportshal and the Vision Positioning is not working all the time.
at low alttitude it drifts and is not hovering nice above 2 meters it wil hover correct.
have you any suggestions ? or had it your self ? or can it be the floor type ?
Tnx
Robin Lissenberg
The Netherlands
BTW love your video's verry good explaind all.
Hey, congrats on being a 99.9k subscribers
Calibrating compass was easy but the IMU seems stuck with the phone screen showing 95%. What to do? The drone is flashing green fast. Great I just installed the prop guard. So I uninstall the guard. What do you call near to metal? A foot or a yard? maybe this was filmed before the update but now the phone screen shows you how to turn it and when. I finally make it work after 30 min. thanks, you were some help though.....every little snag happens and then...shutdown Overheating!! This baby is heat sensitive!
Fixed the error for the mavic mini when it says “check gps settings or calibrate mobile phone compass”. I thought it was about satellite range and spread, blah blah. It was a location service iPhone security issue. Go to Settings>>Privacy>>Location Services>>DJI Fly App>>Always.
For some reason when you set it up the DJI fly app and asks if it can get permissions to use your photo, location services... it changed its security setting for location services to ask. No wonder I kept getting the gps error even at multiple locations. I hope this helps you guys. Took me a day to figure out 😊
It works! I had the same issue on IPhone 8. Thank you for your time and help :)
I got a question I just bought a dji mavic mini and for some reason I can get it to fly could u give me any advice if u can thanks
What’s your thoughts on making the drone as cold as possible before performing an IMU calibration. I understand that way it helps with a quicker start up at all temperatures.
Thanks so much for making this video! Helped fix my problem
Hi there,
Can you calibrate the IMU inside?
Yes you can do both inside
Does it matter which direction you turn the drone -clockwise, counter-clockwise? Same question from a month and a year ago....
Thank you for this video! I was at the mall parking lot looking like a moron spinning this thing the incorrect way.😂😂😂
Where you say don't calibrate near any metal, this might sound a stupid question but my shoulder is held together with metal plates and pins so could this affect the calibration.
Drone Valley said and shows legs open for IMU calibration. His onscreen did as well. Did DJI change it's app possibly??
Very well explained many thanks. I have just subscribed, having watched 2 excellent tutorials from you.
Just ordered a Mavic Mini. Looking forward to watching your videos. Question.... Is there a way using the app to post videos directly to online ie: RUclips or FB ?
Thanks for a video and how to calibrate remote control?
I have zero practical uses for a drone and I need this 🤪
I went to fly in a field and the fly app prompted for gyro calibration. I did the calibration all wrong. The vertical rotation I messed up. Flew ok till I got criticala low battery warning. Made it back and landed. This was my first long range flight and had just done a Dronelink flight plan, which worked almost flawlessly . Dronelink didn't prompt for calibration. When I decided to fly the drone manually with the Fly app it prompted for gyro. I have a question. Isn't it important to do the IMU on a level surface ? Short of carrying a table around what can you do to make sure you have a level surface ?
Thank you so much Billy the kid, I’ve pretty much checked out all your videos super happy finally got a mini and I am loving it!
Yep I had a minor boo boo so that explains why my drone was leaning to one side in the wind and the horizon was off a bit. I'll have to try that out very informative.
Hi I hope you can help me out with this one. I calibrated my Mavic Mini and took off. About a minute in to my flight, a message pops up saying "Compass Calibration Required". This is not all the time, but when it happens, should I be concern and land my drone as soon as possible?
Can the compass calibration be done indoors because normally outdoors on concrete or grass it is not flushed.
Hey Kyle, good video dude. I’m a long time subscriber but find myself with a question that possibly you can answer for me. Do you have any videos on how to tighten up your control sticks on the Mini 2? Basically the right stick, my movements are sloppy and I would like to tighten them down with more positive stick control.
While doing IMU calibration and placing my mavic mini on one side, it lays perfectly flat and parallel to the table but on the other side it lays at an angle. Is this normal, if not should I be holding it flat on the angled side?
I heared it does not have live compass and imu interference? I wanted to Sellin my spark for the mavic mini but as i know from my spark you cant Trust the app to warn you when a calibration needs to be Done.
Again, please add the direction that you should rotate the drone - clockwise? Counterclockwise?
It tells you when you do it. 👌🏼
Hi Billy, I hope you can help me, i own a Mavic Mini when i set the distance slider to full length the Drone only goes 165 feet away and i dont"t seem to be able to get it any further. What do you think is the matter, hope you can help. Thank you.
Thanks Billy, Would you do this when drive to a new location.
Every time I turn on my mavic mini it tells me to calibrate my compass. Whyv
Same. Why?!
Michael fixed it. Apparently there’s something metallic near the drone.
@@ricardot3763 Mine tells me this regardless of what I'm near.
Michael from what places do you take off? For example in pavements then there’s huge metal wires to support the concrete.
@@ricardot3763 i would do the compass calibration everytime..make a checklist like my 1st step is check the propellor screws n props
Sad thing that user manual does not say about it. It's just connect and fly. You might be surprised.
will the mini be available to purchase with discount on black friday coming 29th november?
Is there a reason why the App would prompt me to calibrate my compass EVERY TIME before flying? I did watch your video and I read that it could be after every car ride. However, If i heard you correctly, you also said that you have not calibrated your drone very often (unless the app prompts you to). I don't know if this could be something wrong with my Mini or something. What do yall think?
With the changing of magnetic north. Does this effect drone?
today i noticed that my drones response time to the control input was extreamly laggy i would push forward on the controls and the drone wouldnt respond for about 15-30 seconds and it was only around ten ft from me could the compass or imu being miscalabrated cause this to happen?
should i do this in the field
did u experienced RTH in sideways position?! i mean when returning home started normally the drone elevates then it will turn 360 degree facing the home point.,my mini 2 it only turn sideways and returning home on sideways position..i already tried to calibrate the IMU and Compass but still d same issue..hope u help me on this bro
I have one question. If I want to fly this drone from a boat or raft, how do I calibrate it? Is it necessary?
Nice and informative Billy! Good job
I crashed and broke 5 blades; I replaced all 8, because those not broken were scratched. When trying to take off and hover, the drone lifted about 2ft and flew backwards into a snow bank. No props were broken so I tried again and this time it went up 3-4ft and then full speed backwards until it hit a taller snow bank. Will Calibrating the Compass and IMU fix this?
Great video but my calibration will not proceed past 95% Help?
In my case I get stuck on imu calibration the same way.
Good tutorial, it seems like a very good drone.
It is
Hey billy I just got my mavic today I did all the software updates required and also the compass and imu calibration , I took it out for a flight and notice that my screen kept saying “imu altitude error” ? Should I do the imu calibration again? Pls help thanks again
Try again... this could be a hardware malfunction that requires repair from DJI. Would obviously be covered under warranty
Another video about calibrating the IMU put out on the same date (Nov 10) by Drone Valley has the arms of the drone extended and the graphics on the DJI app have them extended also and on your DJI app the arms are closed. There's also a difference in how the compass is calibrated horizontally and vertically. Strange. His horizontal and vertical positions are different than yours. I calibrated the compass on a drone I have the way you do but drone valley's horizontal and vertical are different. I'd like to know what's what.
He was using a beta version of the app. If you look closely, it is actually a graphic of a Mavic Air in his video.
Hey I have IMU error , doesn’t let me start the calbration and I have the lights flashing green and red all the time, what is the problem ?
Good information. Well done Billy.
imu callibration won't start even when i press start...
I have a magic pro and I am having problem calibrating the IMU , it just about finishes then about the end of it , it's just stays put and doesn't move I need help-
Hey, Just bought it. Not able to imu calibrate error 30055 with S20 Plus. Any suggestions..? Did you find any same issue with device.
Plz help me with this. Tried from last 2 days. I have tried with apple iphone 7 plus.
The last calibration which you mentioned thats not working.
Unable to start this via phone button.
Please help me out
Perfect! Good man!
Which is correct fly app for android phone.s as I have tried the rainbow app but cant get to stage 2 the code on the box I think is for apple phones can anyone show me correct fly app to download as I've had the mavic mini 2 weeks now and been unable to fly it because I dont know which app is best used with mavic mini drone thanks
Do you have to calibrate first time right out of the box?
I wasn't going to bother with the Mini, but after seeing your review I couldn't resist it, so it arrives on Wednesday ;-)
@@masterplanes10 Amazon, I'm in the UK
What is best fly app for mavic mini on android phones any1 help or show me the logo as theres about 12 pop up when u type dji fly app?
Thank you Billy. Great information and tutorial!
Great tutorial very well explained.
I've done already that but my drone is more aggresive and he did not stay in one place..please help what should i do.?
Dji Mavic mini or a used mavic pro (1)?What should I buy?
thank you for your practical information really worth watching
Billy, quick question for you. Got my fly more combo over the weekend. In doing my part 107 registration as I’ve done with my P4P, I used the serial number on the box, which matches the serial number inside the battery compartment.
Today after setting up the Fly app, I noticed the app automatically shows me a totally different aircraft serial number. Is this the case for yours too? Thanks.
Woah, really? Not for me. That’s weird. I’d contact DJI support.
Thanks Billy. I searched the DJI forums and found others have the same issue. Someone reported the following:
“The S/N on the box and the battery cover should be the same. The aircraft S/N in the app will be different. I was concerned too and DJI told me that the S/N on the box is the one that needs to be registered when activating DJI Care Refresh.”
Maybe a bug with the app? We’ll see if this gets corrected in future firmware updates.
Thanks and keep up the great videos.
being so light weight, in what wind speeds can you fly it??
Quick and simple. Thank you
Hello have you ever had a sensor error with the Mavic Mini?
really helpful, I just couldn't make sense of what the illustrations were showing me!
Keep drone rotating for 3 minutes until light turns green, allow it rest on its sides for 3 seconds before flight. -IMU Compass basting process
Can IMU be calibrated indoor?
I was looking for this question before I asked the same question. Just got mines today.