Jackspania Tucked Harness Install 1990 Honda Civic Si - OBD0 to OBD1 conversion
HTML-код
- Опубликовано: 1 дек 2023
- Jackspania 10% off code - GarageBuiltHondas
jackspaniaracing.shop/product...
Radiator - www.ebay.com/itm/382062048886...
Battery Tie Down - www.ebay.com/itm/234948112487...
Exhaust - amzn.to/3lEU2bG
Front Lip - amzn.to/3JNwSJy
Taillights - amzn.to/3Fz6e4E
Headlight Set - amzn.to/3yMUHuz
Maxpeedingrods - 10% off code GBH
www.maxpeedingrods.com/?track...
BullBoost Performance 10% off code - GBH
bullboostperformance.com/disc...
Advan Wheels - jhpusa.com/products/advan-rac...
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFF
Decals available for purchase here - garagebuilthondas.bigcartel.com/
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support! Авто/Мото
I love this video, I’m working on my 91 SI and I’m doing what I call a rich man’s type R I just got the head back from the machine shop yesterday and I’m looking at which harness I need to buy glad I found your video!
Right on!
Love your install videos!!
Thanks for the video, i have a couple things in my cart for my bswap crx im working on!
Looks good. ✌🏻👍🏻
Looking good! Excited for you to install the Y8/SC!
Same bro!
I had no issues with the rywire chassis harness. Both fan and reverse work without adding any wires
Forgot a charge harness so i grabbed a 98 Integra harness and pulled out the charge harness and used that ugly as hell but it worked
Eh !! The thumbnail caught my eye and that's all I see brother. Awesome!!!
If you pull the wiper motor harness from the loom it will definitely reach from under the dash to the motor plug. Thats what i did on my wire tuck in my 91 sedan.
Thanks for adding that!
I think also if needed you can detach the plug on the motor and get a few more inches and maybe hide the plug inside the fire wall
Grasias por conpartir
Simon loco
❤it shout out from Carlsbad New Mexico🌶
Yo!
The plug to turn on the fan goes on the other end so it does not modify the b4 to the a12 of the obd1
I pulled my EF out earlier to work on it too lol
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Do you have to convert your chassis harness to mpf1 if it’s dpfi? I’m running a mono tech plug and play harness but this video convinced me to clean up the bay a bit. Great video like always!
You do not! This would actually be a MPFI swap at the same time.
Got a link for this harness? Tryna do my obd0 to obd1 swap. You made this look super easy so now I’m confident lol
jackspaniaracing.shop/products/b-d-h-f-series-tucked-engine-sub-chassis-harness?_pos=4&_sid=497384ca9&_ss=r&variant=44256951566561&ref=klKh2uTN
How would I find a A6 tune for chrome or HTS?
🔥🔥🔥🔥😎🏁
This is a nice wire tuck, I wonder if they have one for a dual point motor.
They do not. I'm unsure if any companies make one for the DPFI.
@@GarageBuiltHondas might have to do it myself, maybe I’ll just tuck the headlight harness in only on both sides. Thanks
You ever had it where you rev slow and it is fine but when revved fast it sputters and the rpm go down ?
Nvm bad thermostat ground was loose
You have a direct link to the parts you used.
Where did you get the sub harness, the one that powers the wiring?
jackspaniaracing.shop/products/charge-harness-starter-alternator-leads-wire-k-series-engine-k20-k24-fuse-box-us?_pos=35&_sid=218073d1c&_ss=r&ref=klKh2uTN&variant=40595290882199
Hello, I have thinking to buy a exhaust for my ef sedan, will an ef9 full exhaust set fit a sedan? will they line up? I mean, i know it is tad a bit shorter, but adding a flex pipe/test pipe long, will it work? Thank you! Greetings from Iceland
No
Skunk2 alpha headers are too small, hence the purple coloring on the exhaust manifold
This is a generic header.
Where do you get the schematics for these old EF’s?
You can Google most of it and find links and pics to the wiring diagrams
#SavetheEF
Does this eliminate using a separate 0bd0 to 0bd1 jumper harness?
Yes
Will the stock ecu work with this engine harness?
Yes
I need to move from DPFI to MPFI on a D15B2, from KENYA 🇰🇪🇰🇪 how much is it for the parts required?
Here in the united states in todays time 2024 $300 the most and thats not being budget friendly
the pricing for the harness isnt bad at all. i may hit jack to see if he can do a semi custom harness for my integra. i have an obd2 dizzy and FIC injectors. trying to get away from jumper harnesses.
Depending on the teggy year you might only need the obd2 version
Did your chassis to engine harness come with yours I literally paid for it and it didn’t come maybe I’m dumb?
Yes it did. On the pull down menu you select what chassis you are using so they can include the harness.
1989 Honda Civic Dx and I'm did the engine swap to f22b1
Vtec I'm having issues with the wiring harness is there any way you could help me out with that please thank you and God bless you
What's the issue?
Well the issue is the wiring conversion
@@GarageBuiltHondas
Thank you for replying back
@@GarageBuiltHondas
well it the conversion wiring harness Obbi 0 to Obbi 1
@GarageBuiltHondas
well it the conversion wiring harness Obbi 0 to Obbi 1
Can you give me links to the harnesses?
tr.ee/Hd3xbk6nNw
is that a d15b?
No. Sohc ZC, 1.6. Replacement engine for the D16A6
Hello friend, how much can you sell me one of those harness kits? I have an EF D16y8.
You can get it here! Use code GBH for a discount too! jackspaniaracing.shop/products/b-d-h-f-series-tucked-engine-sub-chassis-harness?_pos=4&_sid=497384ca9&_ss=r&variant=44256951566561&ref=klKh2uTN
Looks like the same quality as my raywire and that cost me 986$🤮🥲
Ouch!