Setting Up The Longer Ray5 Rotary Roller
HTML-код
- Опубликовано: 25 авг 2024
- Installing a Longer rotary roller and leg extension kit!
My Laser Channel: / @laser.101
Longer Rotary Roller: s.zbanx.com/r/...
Longer Ray5 10w Air Assist kit: s.zbanx.com/r/...
Longer Ray5 10w: s.zbanx.com/r/...
$50 discount code:R10HWA
TP Link Smart Plug (1) amzn.to/4bcuiZp
Longer Honeycomb:
s.zbanx.com/r/...
Leg extension kit: laser101store....
i struggled with the issues of settings but i have managed to figure it out. im using lightburn 1.6 just for reference. in rotary set up:
choose roller
enable rotary
mirror output to rotary ( you could mirror the image as you go but this saves the potential mistake later on not doing so)
on y axis:
set mm per rotation to 56.52mm
set roller diameter to 18mm
you dont have to input object diameter, only needed for chuck rotary. physically measure and make sure your image will fit within the surface space provided.
tried settings following the video and had the issue of stretching. using the above settings fixed that for me.
hopefully a help for someone else searching endlessly.
you need to play with steps per mm to fix the stretching issue
Is it possible to use bigger workpieces with circumference 10" or more?
I was following the steps very carefully and I still was not successful my machine doesn’t work. The laser when rehoming it hits the frame also the rotary keeps rolling a few times
Interesting.. Have you tried setting home over top of the roller?
@@Laser.101 thank you I’ll try that.
Does it make a difference whether you're on the chuck or roller? Cause looking at your screen, your Chuck is checked off. As the chuck to, is there an issue? Or does it matter?
@@silverstarr354 YEA, what he said. I was waiting for your brain to get smart and check the "ROLLER" box in the rotary setup screen.... I don't know what each type rotary selection is/does, but, they-Lightburn provided the option and LB should/does know what they are doing...