i’m grateful for your video because had i not thought to google how to put one of these chairs together i wouldn’t have known to take that cap off so that the hydraulic system worked
@@charaebrown8835 honestly they have their pros and cons. I like them because well they give me somewhere to sit. But they’re not super comfortable and sturdy. But they work well. Easy to clean. I’ve thought about buying some with a higher back but these aren’t bad.
My guy, TYSM for this vid. I am not the best at assembly, so this is a huge help. My chairs come 2mrw. It didn't make sense to pay $80 for Ashley's assembly service. And that's per chair! 🙄
I just purchased bar stools that look just like yours from Raymour & Flanigan. (putting them together goes the same except each bolt comes with two washers) One of them has a problem staying in the down position. R&F is sending a tech guy to see if he can fix the stool. My bar stools were made in China, how about yours?
Our For Living, tufted bar stool now tilts! Problem appears to be the base collar. Is there a way of confirming this and where do we get a manual? Product bought in Canada from Canada Tire.
Mine didn’t come with the bottom trim piece, screws, and the hex key. Luckily I have the same pieces on my old barstools so I’ll just use those. Can’t bother to fax or email the company to send those pieces
Hello Fiore Melograno! I assembled my 2 today so out of curiosity l raised 1st one to see how high it goes. Now I can't make it go down! The 2nd one is at a good height for shorty me. My g'son is visiting tomorrow. Hopefully he'll figure it out. Mine are khaki. Enjoy yours... Take care,, be safe 🦋
I just bought two that look just like these. One of the stools will not stay when positioned at its lowest position. It slowly raises back to the highest position. Is there a fix for this? Thanks!
Check the button on top of hydraulic mechanism isn't being pushed when it shouldn't be. otherwise Sounds like it is faulty to me. I'd return it and get a new one
I just bought two. Just my feedback. I dont feel so supported. The curve, makes me feel like I can't fully sit back in the chair and am hanging on for dear life. I just feel they make my back hurt. Def not a hang out in for more than 30 minutes chair. But it's a cute look. But may be worth paying a bit more for a more comfortable stool if you want to sit it in for long times.
true. I wouldn’t recommend for long use. than again you shouldn’t be sitting down for more than 30 minutes. I personally use it for my stand up desk, so stand as long as I can than sit for 30 minutes or so.
I have had 2 of them for about a year. The one i use more often started squeaking a lot, then tilting, and now appears to be non functioning thus why i am here. I recommend those four legged barstools that’s what im going to replace them with.
IMPORTANT MESSAGE: IF YOU DONT TAKE THE CAP OFF THERES RISK THAT IT GETS STUCK INSIDE THE CHAIR AND THEN YOU WILL NEED TO PUSH IT OUT WITH A SCREWDRIVER AND HAMMER
i’m grateful for your video because had i not thought to google how to put one of these chairs together i wouldn’t have known to take that cap off so that the hydraulic system worked
Thank you for posting! I'm picking my 2 bar stools up today. Looks very comfortable and easy to assemble.
Thank you because for a moment I thought I was losing my mind assembling my barstools.
How do you like your barstools. I ordered them and now I’m nervous, people are saying they are not good for everyday use
@@charaebrown8835 honestly they have their pros and cons. I like them because well they give me somewhere to sit. But they’re not super comfortable and sturdy. But they work well. Easy to clean. I’ve thought about buying some with a higher back but these aren’t bad.
Julieta Macias thank you!
My guy, TYSM for this vid. I am not the best at assembly, so this is a huge help. My chairs come 2mrw. It didn't make sense to pay $80 for Ashley's assembly service. And that's per chair! 🙄
Thanks for this. I was confused, but you explained perfectly. 👍
👍 good thing i came across this cause I had no idea as to how to put my stools towards thank you 🙏
Now I figure out how to lower it lol 😝 thanks!
EXCELLENT video. Thank you so much for posting it.
Awesome I ordered some just like yours so your video definitely helped me😁Thank you so much !🤗
Where did you order yours from
Your video helped so much. Thanks for posting
Thank you very much. very easy to assemble after watching your video
Thank you, you just saved my life. 😄
This helped me greatly, thank you!
Good video, thanks for showing how to assemble
Good clear instruction for setting up the bar stool, many thanks
He forgot the circular trim between post and base.... It's in a little plastic bag back there
Thanks just did it!
My bar stool came with no instructions. Thank you so much for your video!.
This was super helpful! Thank you! Took me maybe 20 minutes to do 4 chairs that looked very similar.
so touching for an excellent video
How do I get the hydraulic to go down if it’s already highest it goes before I assemble
Thank you very much. I didn't know you had to sit on it to lower it.
Mine did not come with screws. Do you know what size screws you have?
thanks, made the job easy
Thank you!! Big help Sir!
Can you show me hot to disassemble it? I need to fix the spring, its stuck. Got the seat out but im not able to separate the bottom parts
what size screws? mine did not come with screws.
Do you like these? They're on sale right now.. debating getting 4
How do you remove black cap after you already installed.
I just got the same ones and put one up a bit too high. When I sit on it it won't lower? Is it because I don't weigh enough to make it go down?
Thank you very much. X
Good to see that We've got one with a manufacturing error and we're not loosing our mind
I have these chairs. I really like them.
I just purchased bar stools that look just like yours from Raymour & Flanigan. (putting them together goes the same except each bolt comes with two washers) One of them has a problem staying in the down position.
R&F is sending a tech guy to see if he can fix the stool. My bar stools were made in China, how about yours?
How do you lock the base in if you pick the chair up isn't it going to fall apart?
exactly as you see in the video
Our For Living, tufted bar stool now tilts! Problem appears to be the base collar.
Is there a way of confirming this and where do we get a manual? Product bought in Canada from Canada Tire.
thanks, no instructions inside. Glad you showed on on RUclips.
hi, curious how's the chair now after few years? thanks.
it is ok , just a little bit squeaky
2:34 : to make the screws tight, do we need tools ourselves? or, there's a tool goes with this product?
Thank you.
Mine didn’t come with the bottom trim piece, screws, and the hex key. Luckily I have the same pieces on my old barstools so I’ll just use those. Can’t bother to fax or email the company to send those pieces
I did the same but couldn’t lower it, maybe there’s something wrong with it
Hello Fiore Melograno! I assembled my 2 today so out of curiosity l raised 1st one to see how high it goes. Now I can't make it go down! The 2nd one is at a good height for shorty me. My g'son is visiting tomorrow. Hopefully he'll figure it out. Mine are khaki.
Enjoy yours...
Take care,, be safe 🦋
Address Where should we get them.
Thank you so much this confuse me so much
May I know what's the height of this chair in Inches?
I just bought two that look just like these. One of the stools will not stay when positioned at its lowest position. It slowly raises back to the highest position. Is there a fix for this? Thanks!
Check the button on top of hydraulic mechanism isn't being pushed when it shouldn't be. otherwise Sounds like it is faulty to me. I'd return it and get a new one
It feels like I’m sliding down from the chair. Seat is not flat. Not sure how to fix it.
So I'm not heavy enough for chair neads an elephant
Yep. When I sit on mine it won't go down either, but when other people sit on it it goes down like magic. Guess you need to weigh a ton
very good!
Prices kya hai or kha se ley
I just bought two. Just my feedback. I dont feel so supported. The curve, makes me feel like I can't fully sit back in the chair and am hanging on for dear life.
I just feel they make my back hurt. Def not a hang out in for more than 30 minutes chair. But it's a cute look. But may be worth paying a bit more for a more comfortable stool if you want to sit it in for long times.
true. I wouldn’t recommend for long use.
than again you shouldn’t be sitting down for more than 30 minutes.
I personally use it for my stand up desk, so stand as long as I can than sit for 30 minutes or so.
Dose go up or down
both
Are they durable? How long do they last?
I have this chair for 3 years, everything is ok just i bit squeaky
Do it Do it thank you!!
I have had 2 of them for about a year. The one i use more often started squeaking a lot, then tilting, and now appears to be non functioning thus why i am here. I recommend those four legged barstools that’s what im going to replace them with.
James Timmons thanks!
Ok, totally nothing to do with vid, but nice comfy slippers. LOL.
Mine is not coming down
my one not coming down
Sit down on the chair and push the lever down
@@samfar28 mine is not coming down
thank you
Hey you left off the trim piece at the bottom, genius.
And mine is at the very top and I'm too short to sit on it to bring it down
IMPORTANT MESSAGE: IF YOU DONT TAKE THE CAP OFF THERES RISK THAT IT GETS STUCK INSIDE THE CHAIR AND THEN YOU WILL NEED TO PUSH IT OUT WITH A SCREWDRIVER AND HAMMER
My cap is hard to take off!
My chair won’t go down
Bigestload of rubish iv had my chair does not go up or down