I lost my instructions and came to you. Just brilliantly done. Clear, articulate, no chit chat, every word served a purpose, voice sound not muffled because you're looking away from the camera. You could not have done this better. To be honest, I have another one and now I know about the lean back option. You're an ace. Thanks so much.
9 месяцев назад+2
This was an easy video to follow! I purchased it several years ago and dreaded putting it together!!! Awesome!!!
I am with the others that did not have instructions. I inherited the chair in the box, previously assembled but then taken apart...without instructions. Didn't need them, I had YOU!!! I know have a nice chair that is secure. So appreciated. I agree with the comments about how you presented it, step by step. Seems easy enough but so many others biff that process. You nail it. Thank you. You got a sub because of it. Can't wait to see all the other stuff you do. Thank you.
It's very important to have a supporting chair or stool for many hours we sitting on long terms no matter if it's doing soldering work, reading a book, talking on the radio or whatever it is. It's should make you feel comfy sitting in it and being disk, spine and shoulder arm friendly to everyone.
I followed your video to put together my chair ( not the same brand, but same style ). Did not use the washers lol, but it went together just as yours dud! Thank you for the help.
I bought one very similar here in Thai. I have a new workstation and my big capt's chair is at my other work station. What do you think about those hand held sdr's in a case ? Looks like it may be harder to tune than one on a pc or laptop.
Had a quick question for some reason I just received the chair and followed the video but when I pull the handle it doesn’t do anything, meaning it don’t go up or hold the height I want
hey, i have the exact same model and have been looking into new cylinder, to make it taller . I cant figure out how to get the cylinder loose though. Any help?
I purchased two of these desk chairs at different times. First time I was guided to your video right on the Amazon site but the second time I really had to hunt for it. Thank you so much for making the assembly so much easier. Had some difficulty lining up some of the screws but it all worked out.
I was putting a chair together at work and for some reason I couldn’t figure out how to put on the arm rests, I was like how on earth is this supposed to fit 😂🤣🤣🤣
I was so lost on how to put the wheels on. Thank you for this video
I got one in omg this is hard for the freaking wheels
I lost my instructions and came to you. Just brilliantly done. Clear, articulate, no chit chat, every word served a purpose, voice sound not muffled because you're looking away from the camera. You could not have done this better. To be honest, I have another one and now I know about the lean back option. You're an ace. Thanks so much.
This was an easy video to follow! I purchased it several years ago and dreaded putting it together!!! Awesome!!!
I am with the others that did not have instructions. I inherited the chair in the box, previously assembled but then taken apart...without instructions. Didn't need them, I had YOU!!! I know have a nice chair that is secure. So appreciated. I agree with the comments about how you presented it, step by step. Seems easy enough but so many others biff that process. You nail it. Thank you. You got a sub because of it. Can't wait to see all the other stuff you do. Thank you.
Thank you! You made putting this chair together so much easier!
Make sure that The Arm's are leveled! had to readjust mine but after watching this video returned secod one I brought! Thanks
Thank you so much. No instructions included in my box. You saved me a screaming headache
It's very important to have a supporting chair or stool for many hours we sitting on long terms no matter if it's doing soldering work, reading a book, talking on the radio or whatever it is. It's should make you feel comfy sitting in it and being disk, spine and shoulder arm friendly to everyone.
Thanks for sharing. I still had to work hard on things but just knowing you did it made me keep trying 😂
What a help! I was ready to give up. Thanks!
This was awesome thank you for the help.
My chair came without instructions. So thankful for this comprehensive tutorial!
thanks so much. I couldn't have done it without your help. :)
Thank you I got my new office char on my new job let’s get this freight moving 🙌🏽
Thank you so much. I was unable to get the tires in, your video helped me assemble the entire chair
Thanks for this. The instructions were vague but this helped tremendously.
Thank you for this video. It took me a while but I got it done. 😊
This would have taken me 10 days just with the instructions. Instead, one hour. Thanks so much!!
Thanks a ton !! This was very helpful
Thank you so much
Really appreciate your help man🙏🙏
Glad this helped!
Amazing video, thank you! Made putting the chair together super easy & great & clear instructions!
very clear and crisp video
This video helped me build my brothers chair
Thank you for your help!!!
You saved my life with this video
I got one of these chairs. The cushion on the seat is kinda rough. easy to put together.
I have a similar chair like this and your instructions still helped me put it together!! THANK-YOU because those paper instructions are garbage! Lol.
Thank you so much.
Thank you! Made it so easy
Thank you for your guidance on putting this chair together! 😁❤
You are welcome!
Thank you sir 🙏🏾
Thank you soooo much this helped a lot!!!!!!!
Thanks for the build guide. Great video
Those instructions in the paper was so confusing thank you for the help
You are welcome!
Thank you so much 😊😊😊
I followed your video to put together my chair ( not the same brand, but same style ). Did not use the washers lol, but it went together just as yours dud! Thank you for the help.
Thank you, great instructional video
Thank you so much this was very helpful!!
Nice chair
Thank you man this was Supra helpful
Thank you so much for the video
Mines came without instructions
Thanks again
Thank you
I bought one very similar here in Thai. I have a new workstation and my big capt's chair is at my other work station. What do you think about those hand held sdr's in a case ? Looks like it may be harder to tune than one on a pc or laptop.
They look interesting to me. I haven't used one yet so I can't really say much about them. Vive heard the quality of them is a bit inconsistent though
Thank you!!!!!
Had a quick question for some reason I just received the chair and followed the video but when I pull the handle it doesn’t do anything, meaning it don’t go up or hold the height I want
This helped a lot ! Thanks 😇
Thx so much 😊
That's a pretty nice chair for the price!
This was the best video!! Thank you so much!!!
You're welcome! Glad you liked it
Thanks for this video - I am a woman and did ok on the assembly except I couldn't figure out how to make the wheels stay in place
Thanks!
Those arm rests had me lost. Thank you.
Thank you!
How do you lift the chair in the front. It is in a downward slant
Thank god your here... No fricken instructions came with it
Thanks a lot.. 👌
Thx for this.
Awesome video man👊
This is so helpful, thank you so much! :)
Glad you found this helpful
Just purchased and dreading doing this😅
It's not hard, you'll do fine
hey, i have the exact same model and have been looking into new cylinder, to make it taller . I cant figure out how to get the cylinder loose though. Any help?
I can’t put my caps on
I purchased two of these desk chairs at different times. First time I was guided to your video right on the Amazon site but the second time I really had to hunt for it. Thank you so much for making the assembly so much easier. Had some difficulty lining up some of the screws but it all worked out.
My caster won't stay in when I turn it
Thanks man!!
Thx it was helpful
I was putting a chair together at work and for some reason I couldn’t figure out how to put on the arm rests, I was like how on earth is this supposed to fit 😂🤣🤣🤣
I’ve had this chair for 3 weeks and it’s squeaking. I have tried to WD-40 but it’s still squeaking, any tips?
WD-40 is not a lubricant. Try a silicone based lubricant or 3 in 1 oil or something like that.
Ohhh so they were spares 😭😂😂hahah thanks
My chair doesn't move up or down, I have this same exact chair
You have to have a good chair for the shack.
You need to put some oil in screw slots stand up like he is putting arms on but you need c clamp at least I did
What a smart guy I’m such an idiot 🤷🏾 thanks for your help !
is this a good chair to buy?
Good is in the eye of the beholder....I'm happy with mine
This has been the most pain in the ass thing to put together 😖
421 Stokes Oval
Those wheels gave me hell🥴
I did not find this helpful i did not know how to put anything togther
Jesus loves you!
54113 Noemy Unions