Atomstack R1 PRO better than xTools RA2 Pro? 4-in-1 Laser Rotary Attachment
HTML-код
- Опубликовано: 17 май 2023
- ATOMSTACK R1 Pro Laser Rolle Rotary- 4 in 1 Laser Rotary with Risers, Multi-Function Engraving Module for Laser Engraver, Jaw Chuck Rotary for Engraving Cylindrical Objects,Wine Glass, Tumbler, Ring
Amazon affiliate link amzn.to/3BBaTAA
Atomstack R1 Pro
www.atomstack.com/collections...
Atomstack A30 Pro
www.atomstack.com/products/at...
Atomstack AC1 Camera
www.atomstack.com/collections...
Atomstack F3
www.atomstack.com/collections...
/ @atomstack.official
atomstack.o...
#atomstack #laserengraver
Thanks, great review Chuck. I also chose the R1 Pro for the better clearance and angle adjustments.
I found your video while looking for help on configuration in Lightburn with my Xtool D1. The Atomstack instructions are pretty vague, the rotary motion is far from accurate even though i input the precise diameter/circumference.
Trying to generate a circle gives me a figure 8 around the tumbler.
Did you connect to an Xtool D1 or an Atomstack laser?
i used the R1 pro with the atomstack laser
Thanks for the great review. I am just about to buy a roller for my laser and am looking for the best option.
Looking at your review makes me wonder.... what is the point of including a rotary roller in a kit when the handle is so flexible and offers so many possibilities?
Where do you think the roller would be useful?
roller is easier a day quicker to set up and start engraving imo
Thanks for the great video! I see on the Atomstack storefront an R1 Pro and R1 v2 Rotary. The specs seem identical. Is the v2 a new improved version of the R1 Pro or they are the same with the Pro just including both chuck and rollers?
can you show me the connector wire for ATOMSTACK R1 Laser Chuck to XTOOL M1 ??
How do I connect the wires to xtool d1 pro? The instructions are very vague. Any help will be appreciated
ruclips.net/video/OFLdxpz8AtU/видео.html go to the 9 min mark that's where it gets plugged in. your atomstack should come with two cables one is universal
So, can this be used with my Xtool D1 non pro?
I would think so as long as you have the plug in on your engraver for the rotary tool
Does this chuck rotary tool work
Does this chuck rotary tool work with the xtool p2
@@eloiseramos8876 I know it works with the d1 pro