Peterbilt 359 Restoration Ep.65 Birthday Bumper
HTML-код
- Опубликовано: 19 янв 2022
- #littlebylittle #twinsticks #twinstickgarage
After placing an order with the Big Rig Chrome Shop over 8 months ago, I finally received the new bumper for my 1979 Peterbilt 359 Project. My wonderful and very generous mother gives a contribution for these ongoing truck projects every year on my birthday and I’m very grateful. This year, I purchased a 20” Texas blade style bumper with the tapered ends to match the styling of the one the truck came with from the factory and special “blind mounts” that hide all the mounting bolts. This was a customer order where I had 6” round cutouts to install Perlux 200T style classic lights as well like the one used in Smokey and the Bandit Part 3. Unfortunately, the bumper arrived without the cutouts for the lights. Obliviously, I was quite disappointed but other than that miss, the bumper is a beauty and was very easy to mount … actually, the hardest part was getting the old one off…
Hope you enjoy the video and thanks for all the comments, suggestions, and support!
Keep in mind, I know a little about a lot but not an expert in anything … just doing the best I can, learning as I go ... I do all my own stunts
Enjoy watching the progress of this Kenworth W900A project, the ongoing Peterbilt 359 restoration and the upcoming #IronDuke Kenworth K100 cabover I’m planning to build up like the one used in the 70’s trucking movie High Ballin’ with Jerry Reed and Peter Fonda.
Subscribe for notifications for future episodes that I do my best to upload new videos weekly on Thursdays
Note that for some reason RUclips set my channel as made for kids awhile back so if you haven’t been getting notifications, just unsubscribe, re-subscribe and hit the bell to ensure you never miss an episode!
DayCab Company Custom Interiors: www.daycabs.com/
Gratz Manufacturing: gratz-manufacturing-inc.busin...
Mrs TwinSticks Custom Bracelets: @natures_precious_stones: / natures_precious_stones
Twinstick Garage Instagram: @359twinsticks: / 359twinsticks Авто/Мото
Just got a phone call from the Big Rig Chrome Shop and they want to make this right so maybe I’ll get to install those Perlux lights after all 👍
well thats good to hear. hopefully you get your lights and your missing brackets. great video
Dear TWS Mark P.
Don't you think that this big shiny bumper looks absolutely fantastic just like it is (without any holes at all)? Please kindly allow me to suggest, that you give it another look respectively watch the end of your great video. Thx
Sincerely yours.
Awesome deal, good to know there are still companies that have good customer service
Sure hope they don’t make it right by sending you a 6” drill bit just for “shits and giggles”!!!!🤪 🙄 😁
Wow, talk about screwing up in public.
Mark, the bumper looks great;HOWEVER, I have always believed that customer service separates the men from the boys. I would rate that company in the "infant" stage. You ordered it with the holes for the lights and it didn't come with the holes. Strike one. The kit was supposed to include the mounting hardware. It didn't. Strike two. The bumper took eight months to get to you. Strike three. In my book, I would contact the manufacturer and ask them to refund the purchase price to you. If they don't, I would just let all your viewers know who the company is. That may not be In your makeup, personally, but if you don't hold their feet to the fire,they will continually "under serve" their customers. You may not be able to get any help on your problem, but you could save others a lot of grief. Just a thought. Like I said, the bumper looks great. Thanks for my Thursday Twinsticks fix!
Well said
Didn't he call out the supplier right at the opening stage? Big Rig Chrome Shop?
@@ruaraidhmcdonald-walker9524, if he did, I missed it. My hearing isn't so great.
@@glengullickson6538 Think he said "NOt happy with you Big Rig Chrome Shop" at 2:22
I'll play devils advocate, seems they laid everyone off and its one or two guys just shipping whatever they can - I bet they haven't answered the phone in months/weeks as its all pissed off customers calling. Still no excuse to send out the wrong parts, I am surprised it even fit.
I would call and get my money back if the company is not going to fix their screw up. Great videos
I love days when i get to hang out with mr twin sticks
Hey buddy like the bumper an the trucks keep warm buddy
Little by Little... One awesome truck!
I love seeing LBL, even when shes not the star of the video. Shesso gorgeous
Love your peterbilt man she is looking better and better every video
7 months or not that thing is awesome. Worth the wait I would say.
There’s always one that gives you hell! That could apply to anything!😂😂🇨🇱
All the trucks are cool. But L.B.L. is my favorite. That bumper is a beaut. And I see they are going to fix their screw up. So can't wait for it.
This is the first time on this channel. I always want to drive semi. The biggest thing I got to drive Chevy C-65 grain truck. Good luck rebuild snowman truck. Like the music!
Don’t settle for less ! Anti-seize is your friend. Looks good
Nice that will look awesome and bad ass on the Peterbuilt 359 right on , sucks about the lights issue but glad they’re willing to fix the problem and put things right now.
Now That's a bumper!!
Ole Snowman really is a racing truck! Got a detachable steering wheel and all🤣🤣🤣🤣
It's not the end of the world. I have a 86 ford f250 I got 4/1/2 in hole cutter cutout holes in my bumper to put train signal lights they are 4 inch bought the semi trailer light boots pressed them in hooked em up measure your lights walla they work have to adapt and overcome sometimes. It will work out buddy. Keep on trucking. Have a good day. God bless.
Yes, if that what it takes on a public platform then they should make it right. Truck looks good.
Hello from Tasmania really enjoying your channel can’t wait to see the cab over build
If it were me I would be sending it back it looks like there are some small dents at the bottom edge of the bumper too ( you can see them when you first opened the box and took the wrap off) always disheartening when you dont get the right part sent out. If that was me it would bug me constantly and I would end up having to send it back again.
Also I wouldnt drive it without the lower support on the bumper as it WILL flex and ultimately you could end up with protruding dents from the hidden bolt heads.
It looks great fitted but I wouldnt be happy with it.
As usual though Mark thanks for keeping my spirits up I always look forward to Twinsticks Thursday, you help to keep me motivated during this bad time with my mental and physical health.
Im still thrilled you were able to build your garage every time i see it. An artist deserves a good studio. Keep em coming, mark
Your new mic sounds great. Thanks for reinvesting in the channel
I got the idea from you. Your a great inspiration buddy thank you for your wonderful ideas.
Hey Mark, there are companies that will cut the holes for the lights where you need them in that chrome bumper using a water jet feature I've had a similar situation with a factory bumper and this technique blew my mind it looked not only factory when they were through but it was perfect without a flaw and i was able to finish my project but if would go after that company for a full refund of the purchase price on that bumper
If you cut chromed bumpers you'll watch them rust from the cut in days depending on how shit the base metal is (and these days, unless you specify exactly what you want, you won't get the real thing).
Stern fan are we? Love Artie Lang😎
Looks good without lights!
Mum Twinsticks comes through again, what a star. It looks stunning. Well done for keeping it together getting the old one off. I'd have got the grinder out, and the bumper would've left via the window 😂
Nice bumper uncle Buck.
I'm loving your trucks the really good
Heavy tow truck operators everywhere were CRINGING when you popped those front tow hooks off!! OUCH!
It’s not complaining when you bought and paid for something and it’s not what you ordered . All to often do we order things and it’s short mounting hardware. It sure looks awesome Mark , another great job done .
I know you wanted those lights but my guy...that is one SEXY ass bumper. Chrome never looked sooooo good.
I for one think that bumper is PERFECT for the Pete. Just an uninterrupted mirror, I love it.
If you have a Fab shop around your area see if they can cut out your lights with a water jet cutter. But it looks beautiful. Be safe and keep up the good work ❤️❤️❤️👍👍
I really like that bumper without the lights. Looks so clean without them in my opinion
Get a leaf blower to "sweep" the shop. Also, handy for drying the trucks after a wash!
you had me on the floor with the "the exhaust gases which are discharged from engines part lmao
Bless momma twin sticks heart. Tell her we all said thanks for the bumper!
Nice bumper Mark👍🏼
Mark, great looking bumper. A real shame the supplier didn't follow your instructions. As others have said, there must be an engineering shop that could modify it for you. It's more expense, but you've already waited 8 months for it. You could probably get the brackets made too. Loving the channel. Mike from Lancashire 🇬🇧
Hey Mark great video! There are a lot of really good Canadian companies making bumpers and other stainless parts that would go above and beyond to make sure that you received the product you ordered. Also I would say in my experience the quality is much better. shoot me a PM if you want some more info.
Looks good 👍
I'm got the film Smokey and the Bandit I really love to watch him
Hey Mark keep that bumper it looks better whit no holes and if you paint that truck in your shop the paint going to get everywhere you will be cleaning for year’s have fun.
Yes definitely a beautiful bumper!!! Thanks marks mom!!!!
You should get the names of the trucks put on the stall doors some way or another and have each truck it’s own stall. That would be 👌🏽mint!
Love the new mic😁
i emailed big rig chrome shop tailing them to get ahold of you and make right so probaly go no where but i tried lol have good day sir 10-10 on the side
Looks good
well i watched all your vids and i liked your site need more haha
At looking good on the truck
They need to make it right for you Mark.
Bumper looks awesome. Glad they're gonna make it right
Here's to all the Mom Twinsticks! If your mom is still kickin, give her a big hug!
I hope they make right after such a wait.
Good on them for wanting to show great customer support. Lets see what they can come up with for you Marc because you have time on your side so getting them to replace it correctly is the right way to go.
Not gonna comment about the bumper, that horse has been beat. Love the Artie Lang drop.
Looks awesome, pity about the cut outs missing, that would set it off really well having lights in that bumper.
What a difference , it really gives the truck an aggressive look . Really cool.
Mark you are just a good trusting soul. I would rip that piece of crap off my pride & joy, throw it in the junk pile and tell them to come pick up their crap and get your money back. They don’t care to even check that the freaking bolts are in the box after waiting 8 months! They obviously do not care about their customers! I’m so sorry that an American company has such horrible disregard for there customers. This video really made me mad! Please keep up the great work, I look forward to your videos every week!
Man those pipes on little by little are bad ass looking!!!❤
Music request - some good Canada boys, maybe Corb Lund & Tom Connors. Dont get me wrong, i absolutely love the music now. But i love listening to your voice & accent too. Its like a vacation to the great white north, eh? Sorry, i cracked myself up with that. 🤣🤣
A Texas viewer
snowman's got a healthy engine, thing caught those cylinders really quick
Good morning Twinsticks garage 🤘🇨🇦✝️...I'm down with the Rona 😷...I feel fine tho knock on Wood....welp now back to Twinsticks garage 👊
Get well soon 👊
Good job Mark 👏. It looks really good on there .... one thing at a time ....
One of the hardest things to do was turning my sound up and down everything you walked away from the camera mic. The new sound mic you have is awesome. Thank you for doing that
You always can take the blueprint to a machine shop and have a machine inserts where you put the lights in if I cost them on the lab done but they won't damage the bumper
Even without the lights it looks amazing.
I know you waited 8 months but I would’ve boxed it back up & told them to come & get the SOB. But that’s just me. Take care & stay safe. Cheers
Great to see you happy and making progress
Sorry to say ,as nice as it looks I'm Glad you told us who the are" BIG RIG CHROME SHOP." If they'r going to charge a pretty penny for that bling they BETTER get it right! I will use them as a last resort for my project now. Thanks again for letting me know who they are.
Классный бампер👍✌
Welp, never shopping at said chrome shop! 4 state is the way to go. Chrome Shop Mafia
Love Thursdays!! TwinStickGarage time...... 👍👍👍
Love the work you have done with old blue cannot wait to see when you finish them all
I love how you keep your cool all the time. The trucks are all amazing they remind me of the ones I had when I started trucking. Keep up the good work.
awsome video mark too bad about the bumper i wood be mad to i dont blame u still looks good thought thumbs up and shared
Great to start the day with a new episode . Looking good Mark.
Man I love seeing all the progress on lbl can’t wait to see it get painted
Thats awesome!! Shame about the missing cutouts. Fantastic set up
Nevermind the “crying too much” about the bumper mistake, that bs happens way to often and we all let it slide way too often. You paid money expecting one thing and got something else. Still looks sweet regardless.
The bumper looks great Mark, LBL is really starting to shine even without paint. Myself I would have shipped the bumper back, I believe a person should get what they pay for, but I respect your decision. Have a great week my friend see you on the next one
Gotta be honest…love the no cutout look…it’s so much more smooth and clean.
not right though
@@gtametro still looks good…🤷🏼♂️
@@mg5632 yeah it looks nice, still, i would have liked to see the spots in it.
yay
Are you heading to Ottawa this week?! It would be great for your channel..... great stuff! I love the mechanical stuff/ how you persevere through challenges with your build. I would also like to see videos if/ when you rebuild your engines! And always why!... take care.
I'm sure Mark is trying to keep this channel not political, but you said what I was thinking too.
Bumper looks awesome
Love your trucks and your channel.
LBL looks great with the new bumper nice job 👍🏼
Nice finishing touch with that bumper!! Nice job !
Is it possible to be too "Canadian"? Man, you were awful nice about the Big Rig Chrome Shop's multiple screw ups. Show's what kind of a man you truly are!!!
Bumper looks awesome a shout out to TwinStick Mom!!!
That looks really nice 👍👌
Looks great mark sorry about the lights
Hope the company will step up and get you taken care of. Truck is looking great. Keep up the good work.
You needed a 4 stall garage, so you can fit a black mack r700 in, rubber ducks convoy truck 🤷♂️ that was the very first truck movie i saw when i was a kid, my parents let me watch it at about age 6, even with the swearing and violence in it, it never did me any harm
Nice bumper, yano over here in the uk, im jealous, we dont have so many nice trucks, most of ours are cab overs, they have been for decades, ever since i can remember
Theres a hand full of trucks with the hoods like the pete and the kenworth you have, but there very rare to see, last time i saw one was about 8 years ago, well, i saw 2 at the same time, two red kenworths, i dont know what model kenworth, they looked like 1970's/1980's trucks though, they werent the newer ones, they were both driving together, they must have been to a truck show
It was amazing to see them on the road in the uk, honking the horns as they approached a roundabout 😁
Good one boss! That bumper looks great.
An upload on my birthday. Awesome 👌 🆒️
Happy Birthday Mark!!!!!
Hi Mark, that bumper sure looks nice. But like you I would be disappointed with their incompetence in not getting it right for you! I would be having some colourful conversations with them 🤬🤬cheers.🇦🇺🇦🇺
Good ole Mum👍👍