Thank you so much for taking the time to post this Melissa. It was concise, clear to follow, and achieved exactly the result I wanted. Regards from across the pond (UK).
I can’t tell you how glad I am to have found this! After trying many other resources, I was tearing my hair out in despair. Thank you so much for saving the annual Christmas card address printing from going old school this year.
Thank you, straight forward brief and to the point. You seem to have touched on most of the points I was wondering about and had some good points on creating a data base.
Thanks, this was much easier to follow than a couple of other videos I've watched. I did have one odd problem, there was a blank page between every good address label page.
Hi Dana! Thank you! I’m glad it was helpful. There are a couple of things that can cause a blank page. The biggest is the page margins. If it is too close to the footer it will kick a blank page so check that first. Second is a setting in Tools / Options / LibreOffice Writer / Print / Print automatically inserted blank pages. Make sure that is unchecked l. Let me know if these help. I get notified with you comment so we can work through this. Thank you!
Hi Melissa thanks for easy to follow video. Is it possible to move the text down to put it in the centre of the label, it moves across but i can't pull it down of the top this would help when printing it's close to being cut off when i peel the label off. thanks again.
Thanks. I would have never figured this out on my own. But it's not working for me because after I created the database from my Word document of 500 different mailing addresses, and the Table field gives me the option of choosing between 17 tables and when I try to choose my database field, I don't have the option to choose street address, town, state zip. I only get the option to choose from one of the prefilled addresses and only that address is displayed when I go to print.
Hopefully you are still out there Melissa as I can follow along until the merge where I get aa "The data source labels was not found." I have tried registering the base and deleted all previous attempts as not to confuse it. But it still hangs up at this point. Any ideas?
Hello. I apologize for the delay in responding. Usually when this happens the file was saved in a different format or moved. Make sure it is saved as a libreoffice document.
Hi Melissa, I am having an issue. Everything is fine till I get to the part where I click File, Print, & Yes. All I get is a dialog box to print. No option is given to Save to the file. I have Libre 7.6 if that matters. Thanks in advance for your help.
Watching your “How to create address labels in LibreOffice Writer On Data base section (Spreadsheet) I did File / New / Labels Database section [Says New Database] Table section [ Doesn’t show Sheet1] humm How can I correct this to make it change to Sheet1?
Good morning, while i try to connect database by clicking file then database but database has not been displaying however all other icons showed as it was on the said clip. Seeking your consent, please.
Hi Melissa I followed thru all the steps, and after mail merge was finished u went n clicked on the file.....wen I did tht my names and addresses wnt pop up? Wats my next step
Clear, simple step by step process for making Libra Office Labels. Thank you for one of the most easy to follow training sessions I have encountered.
Label creation from spreadsheet was confusing to me until I saw this video. Thanks for posting a step by step process for LibreOffice label tutorial.
Straight forward and easy to follow. Next question is: how to get back in and add additional fields to the labels?
Out of all the tutorials I've searched, this was the best and easy to follow! Thank you so much!!
This was a lifesaver! Thank you for the easy-to-follow instructions and explanations along the way!
Thank you so much for taking the time to post this Melissa. It was concise, clear to follow, and achieved exactly the result I wanted. Regards from across the pond (UK).
Oh my word! This has been a life-saver! Thank you for helping me get my labels merged and printed to a file.
I can’t tell you how glad I am to have found this!
After trying many other resources, I was tearing my hair out in despair.
Thank you so much for saving the annual Christmas card address printing from going old school this year.
Thank you! Glad it helped!
Thanks Melissa, your clarity and intelligence saved my morning! Well done.
Thank you! Glad it helped!
"Print to file" is exactly what I was looking for! Thank you sooooo much!!!
THANKS-- LOVE these simple - short- TO THE POINT libre office trainings....
Thank you! Glad it was helpful!
Thanks so much for your video! I've been looking for something like this for quite a while!
Thank you, straight forward brief and to the point. You seem to have touched on most of the points I was wondering about and had some good points on creating a data base.
Brilliant - worked first time.
Glad it helped
Really useful - much better than LibreOffice help.
Completely new knowledge for me. Thanks!
Thank you so much!
This video was a lifesaver for me.
Thank you! Glad it helped!
Exactly what I had been searching for. Thank you!
Thank you. This works flawlessly.
Thank you! Glad it helped!
Well presented and easy to follow tutorial, thank you so much 😁
Wonderful video,, very clear and easy to understand! Thank you
Thank you so much! Great video, it was exactly what I needed.
Thanks, this was much easier to follow than a couple of other videos I've watched. I did have one odd problem, there was a blank page between every good address label page.
Hi Dana! Thank you! I’m glad it was helpful. There are a couple of things that can cause a blank page. The biggest is the page margins. If it is too close to the footer it will kick a blank page so check that first. Second is a setting in Tools / Options / LibreOffice Writer / Print / Print automatically inserted blank pages. Make sure that is unchecked l. Let me know if these help. I get notified with you comment so we can work through this. Thank you!
Hi Melissa thanks for easy to follow video.
Is it possible to move the text down to put it in the centre of the label, it moves across but i can't pull it down of the top this would help
when printing it's close to being cut off when i peel the label off.
thanks again.
Seems this video did well, did you ever try to double down on the topic?
thanks so much. was really struggling with this and u helped a ton.
Thank you, well made and helpful.
Excellent Video..............Thank You.
Very well done! Thank you so much
This video is very helpful
Thank you! I'm glad it helped!
thanks, did my lables in two minutes.
Wonderful¡¡¡ Thanks Melissa
thank you so much for the video. keep up.
Thank you! That helped!
Thanks. I would have never figured this out on my own. But it's not working for me because after I created the database from my Word document of 500 different mailing addresses, and the Table field gives me the option of choosing between 17 tables and when I try to choose my database field, I don't have the option to choose street address, town, state zip. I only get the option to choose from one of the prefilled addresses and only that address is displayed when I go to print.
Yeah sis you help me so much maybe I could now score better in my pratical tomorrow 😊
Hopefully you are still out there Melissa as I can follow along until the merge where I get aa "The data source labels was not found." I have tried registering the base and deleted all previous attempts as not to confuse it. But it still hangs up at this point. Any ideas?
Hello. I apologize for the delay in responding. Usually when this happens the file was saved in a different format or moved. Make sure it is saved as a libreoffice document.
Hi Melissa, I am having an issue. Everything is fine till I get to the part where I click File, Print, & Yes. All I get is a dialog box to print. No option is given to Save to the file. I have Libre 7.6 if that matters. Thanks in advance for your help.
Thanks!
Watching your “How to create address labels in LibreOffice Writer
On Data base section (Spreadsheet)
I did File / New / Labels
Database section [Says New Database]
Table section [ Doesn’t show Sheet1] humm
How can I correct this to make it change to Sheet1?
Can you tell me how to do this on a Mac? There is no Options key. Thanks
Good morning, while i try to connect database by clicking file then database but database has not been displaying however all other icons showed as it was on the said clip. Seeking your consent, please.
Hi Melissa I followed thru all the steps, and after mail merge was finished u went n clicked on the file.....wen I did tht my names and addresses wnt pop up? Wats my next step
Hello! Your names and addresses didn't pop up for you?
Exactly what I had been searching for. Thank you so much.
Very well done! Thank you.
Very helpful! Thank you.