if your patient you can check out aliexpress. They are cheaper on that website and it took about 2 weeks to receive the product. It's worth the savings imo.
Good stuff! I just got one and it seems undrivable with the stock gyro even on the lowest gain so I just ordered the external gyro. It's my first rwd drift rig so maybe Im just not good atm🤷♂️😅
if its your first time then definitely you are part the reason but rest assured that you can get these tuned and you will be driftingin no time. You definitely need the external gyro to get this drifting proper. So dont worry you will notice how much better it is after you install that gyro.
Awesome upgrades! I'm really interested in how does the metal diff works. By the way, if you need stronger servo, you could use emax 12g in it like mine does. It's an overkill though using 12g 😂
I will have a video on the metal gears once the rest show up. The diff is a ball diff and I'm just going to tighten it so its locked. Probably was meant more for guys that want to run these with rubber tires. That way they can adjust the differential.
all these do apply to the 1801. Only difference to the 1801 is the narrow width and it uses different a arms and rear axle is a cvd and shorter than the other models. Other than that they are all the same chassis.
Great channel, want to get the rbrc gyro coz the dasmikro costs literally ten times as much to get it shipped to me, with the rbrc gyro do u have an install video? And should I buy anymore connectors etc? Thanks!
appreciate it! The RBRC gyro installs the same way but doesn't need any additional adapters. My experience is good with those gyros. Just make sure to make very slight micro adjustments on the gyro gain then test (with body on because it changes the drift characteristics) .
@@RunThatRC thanks iv got it installed but it seems my front wheels don't have enough traction,iv set the front toe out and camber and when in full steer my front lead wheel makes full contact with the surface,any ideas sir?
If you have this model I recommend adding a better gyro and that's really it. These are fun without much mods needed. I recommend the DasMikro V5 gyro you can use it with your stock electronics.
This is a question about the past OK. I have the RES-V3 and I want to double check the mounting or the servos. When pushing them on are the silver pins facing down? 😸😸🐱😹
I'm not 100% sure what your referencing. Are you trying to figure out how to plug the servo to the board. They weirdly can be plugged in two ways. Should be plugged in parallel to the board.
@@RunThatRC yeah there's 3 inlets on the board stearing, gear change and top is for the winch. When I'm plugging them in do the little silver pins on the connectors face up or down. I'm worried about frying the board. Hope this helps. If the polarity is wrong for these will it fry the board?
@edwardlove4300 They face down, and nothing should happen if plugged in the opposite way. It's always safe not to plug things in wrong, that's for sure.
Thanks so much. I did fry a few boards in the past. I hate when it happens. It's always the battery plugged in the wrong way. Not sure if polarity is a big deal with attachments like winch or servos??? Thanks again.
I usually try to have links but the sellers I got them from no longer have stock or will not be caring them anymore. I just search LDRC on aliexpress and a bunch of stuff comes up.
@@RunThatRC i just ordered one it’s was only 20$ but i’m gonna test it out and then if it doesn’t work i’ll buy that one my budget is kinda low tho lol
@MSF_middles-_- I got the DasMikro v5 for 18 bucks on aliexpress. Just have to search for deals. They shipped it fast. Was here in about 10 days. I'm sure any gyro is better than the stock one in the rx7 anyways.
I got them all from aliexpress but I usually dont post links from there because sellers always change or go out of stock. Search ldrc on aliexpress and you will find all these parts for these little guys. the 1801 has shorter a arms, shorter cvd driveshafts on the same chassis as the 1802(rx7), 1803(nsx), 1899(GTR). The 1802, 03, 1899 and newest 1804(miata) are on the same chassis and same longer a arms with longer dog bone driveshafts.
To strip a servo on one of these cars compared to a normal off road buggy is highly ulikely unless the servo is horrible quality imo..i have the heavy diecast car and plastic servo has plenty of torque .
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Very informative!
Can you drop the link for the metal diff set?
Thanks
I haven't tried these little drifters yet. My RC budget is tight but I'd love to give it a try. 😉
if your patient you can check out aliexpress. They are cheaper on that website and it took about 2 weeks to receive the product. It's worth the savings imo.
I live in usa and aliexpress is usually 7 days for me...much faster than bg and always way better prices than Amazon...
@@roadstar499 I just started using AE again. Definitely better deals and faster shipping.
Good stuff! I just got one and it seems undrivable with the stock gyro even on the lowest gain so I just ordered the external gyro. It's my first rwd drift rig so maybe Im just not good atm🤷♂️😅
if its your first time then definitely you are part the reason but rest assured that you can get these tuned and you will be driftingin no time. You definitely need the external gyro to get this drifting proper. So dont worry you will notice how much better it is after you install that gyro.
Awesome upgrades! I'm really interested in how does the metal diff works. By the way, if you need stronger servo, you could use emax 12g in it like mine does. It's an overkill though using 12g 😂
I will have a video on the metal gears once the rest show up. The diff is a ball diff and I'm just going to tighten it so its locked. Probably was meant more for guys that want to run these with rubber tires. That way they can adjust the differential.
Hey , great video love this RC , does all of those mods apply to my 1801 ?
all these do apply to the 1801. Only difference to the 1801 is the narrow width and it uses different a arms and rear axle is a cvd and shorter than the other models. Other than that they are all the same chassis.
@@RunThatRC appreciate the answer , cant wait for my 1801 to arrive , right away i ordered the gyro v5 and aftermarket wheels , Exicted bro hhh
Great channel, want to get the rbrc gyro coz the dasmikro costs literally ten times as much to get it shipped to me, with the rbrc gyro do u have an install video? And should I buy anymore connectors etc? Thanks!
appreciate it! The RBRC gyro installs the same way but doesn't need any additional adapters. My experience is good with those gyros. Just make sure to make very slight micro adjustments on the gyro gain then test (with body on because it changes the drift characteristics) .
@@RunThatRC thanks iv got it installed but it seems my front wheels don't have enough traction,iv set the front toe out and camber and when in full steer my front lead wheel makes full contact with the surface,any ideas sir?
@@ethanalexanderpatience1994 hey, did you able to find any solution for it?
hows the experience with the rbrc one ?
can we have a list of the thing to buy for the upgrade ?
If you have this model I recommend adding a better gyro and that's really it. These are fun without much mods needed. I recommend the DasMikro V5 gyro you can use it with your stock electronics.
This is a question about the past OK. I have the RES-V3 and I want to double check the mounting or the servos. When pushing them on are the silver pins facing down? 😸😸🐱😹
I'm not 100% sure what your referencing. Are you trying to figure out how to plug the servo to the board. They weirdly can be plugged in two ways. Should be plugged in parallel to the board.
@@RunThatRC yeah there's 3 inlets on the board stearing, gear change and top is for the winch. When I'm plugging them in do the little silver pins on the connectors face up or down. I'm worried about frying the board. Hope this helps. If the polarity is wrong for these will it fry the board?
@edwardlove4300 They face down, and nothing should happen if plugged in the opposite way. It's always safe not to plug things in wrong, that's for sure.
Thanks so much. I did fry a few boards in the past. I hate when it happens. It's always the battery plugged in the wrong way. Not sure if polarity is a big deal with attachments like winch or servos??? Thanks again.
Que motor utilizas de cuantos kv, saludos desde Perú
this one is stock 150 size motor.
Can you put links stuff other than your screw? Lol thank you!
I usually try to have links but the sellers I got them from no longer have stock or will not be caring them anymore. I just search LDRC on aliexpress and a bunch of stuff comes up.
Do you think it’s worth buying one for 50 euros?
If you find it for around that price with free shipping then yes. Just add a external gyro and your good to go.
@@RunThatRC I ordered Rx7 And a little later I’ll order a new servo and gyro like in the video
which gyro is it and what things did you put on the wheels
it's the DasMikro V5 gyro and the LDRC metal hex upgrade.
@@RunThatRC thank you
@@RunThatRC i just ordered one it’s was only 20$ but i’m gonna test it out and then if it doesn’t work i’ll buy that one my budget is kinda low tho lol
@MSF_middles-_- I got the DasMikro v5 for 18 bucks on aliexpress. Just have to search for deals. They shipped it fast. Was here in about 10 days. I'm sure any gyro is better than the stock one in the rx7 anyways.
@@RunThatRC hey do you get all your parts of of aliexpress
Will this gyro work on the 1804 too?
Yes it will work on the 1804.
@@RunThatRC good to know. Follow up question, is the procedure to disable the internal gyro on this model the same?
@fulltang1 The 1804 you just leave the gryo gain on the controller at zero, and the gyro is disabled.
Do you have a link of the parts
I got them all from aliexpress but I usually dont post links from there because sellers always change or go out of stock. Search ldrc on aliexpress and you will find all these parts for these little guys. the 1801 has shorter a arms, shorter cvd driveshafts on the same chassis as the 1802(rx7), 1803(nsx), 1899(GTR). The 1802, 03, 1899 and newest 1804(miata) are on the same chassis and same longer a arms with longer dog bone driveshafts.
@@RunThatRC thank you.
To strip a servo on one of these cars compared to a normal off road buggy is highly ulikely unless the servo is horrible quality imo..i have the heavy diecast car and plastic servo has plenty of torque .