Thanks for visiting, it was great to have you and help you expand your Rhinox collection! We look forward to seeing that new grading bucket in use soon. The only thing tougher than our buckets is guarding the biscuit tubes when you're around👀😂
Decided to order one of Rhinox quick hitches for my Yanmar which works great btw. Trouble was it required a 35mm clearance from pin to bucket and most of my buckets only had 25mm. That was expensive to replace my aging buckets (which were wearing out anyway) but hey - now I have all new Rhinox buckets they are great. Thanks for the discount code as I'm going to order one of their riddle buckets 👌
I know what’s going on. You teach Emily welding and then you go to the factory where they make buckets for machinery. You’re trying to get her a job in the factory and then Emily can make you buckets. Really interesting cheers Tom.
Brilliant Tom, so great to see a growing UK manufacturing company 🎉 you looked exited to see the buckets like a sweet shop 😅 they should make a special one for you 😃
Thanks for bringing us along, found that quite interesting. Emily should apply to go part time into the welding shop, there's a good place to get sharp. Thanks for posting....
Great video, I ordered a digging bucket and ripper tooth from rhinox at the weekend to fit my 3.5 ton hitachi which they are manufacturing next week so it was great to see the production process and the scale of the factory
Working in plant hire buckets are the bane of my life, trying to organise and find them. Diggers would be so much better without them! But I did really enjoy this video, very interesting to see and surprised how manual the process is. Cheers Tom.
Great video! 👍🏻, I would well be at home working there when vauxhall closes down ( very soon) if they need any stores persons/ fork truck drivers! Looks like a good employer! Very interesting 👏🏻👏🏻👏🏻
Great content remember turning up on a site to go on hire 1st thing I said to the Irish man cut the JCB bucket 🪣 teeth of because I would be digging service drenches so this was about in my days driving a site master would have been handy cheers Tom
Pretty cool! It is amazing when you stop and think about how many different styles of buckets, quick hitches, pins, and all that are out there! It's almost as bad as hydraulic fittings!!!
I get a chuckle seeing you in that little car your probably a foot taller than me and yet I drive an suv that would probably fit your car and that excavator bucket in lol 😆
I was expecting when the welder lifted their mask it would be Emily. Good idea, the rounded end for the utility trench bucket, how come it's taken so long for someone to think of that.
Amazing stock levels, I wonder what value is in that four acre site - tens of millions of pounds worth easily. Just had a quick shufti at their website, and quite impressed with their prices !
I wondered what was going on when you so effortlessly lifted that hitch @22:57 Can they print them as one piece, or is it multiple parts glued together?
Why on earth don't they standardise bucket hitches and make them interchangeable? They'd obviously have to account broadly for machine size. The industry needs a governing body like whoever it is that enforces phones etc. to have USB-C nowadays.
@sheilabray1620 I think you misunderstood what he was saying, Its not that there isn't enough power in the National Grid to run plasma cutters etc.... What he was actually referring to is the amount of power that they need in their workshops, including them big plasma cutters, would be greater than what their supply currently provides. National Grid has more than enough power for that kit, just not through their current (and most likely very old and limited) cables to the property
Thanks for visiting, it was great to have you and help you expand your Rhinox collection! We look forward to seeing that new grading bucket in use soon. The only thing tougher than our buckets is guarding the biscuit tubes when you're around👀😂
Thanks again!
lol. 😂
Do you design in-house?
hahaha
Looks like it pal @@mikeuk666
i think he found number 1 on his bucket list
It brings me buckets of joy to see a British manufacturing company. I hope they do well, it's becoming a rarer sight these days.
Decided to order one of Rhinox quick hitches for my Yanmar which works great btw. Trouble was it required a 35mm clearance from pin to bucket and most of my buckets only had 25mm. That was expensive to replace my aging buckets (which were wearing out anyway) but hey - now I have all new Rhinox buckets they are great. Thanks for the discount code as I'm going to order one of their riddle buckets 👌
We appreciate your support, Kevin!
There is something magical watching a welder piece everything together.
Good quality buckets I ordered a 6” and a ditching bucket for a kubota u17 and had them fedexed to Thailand
I know what’s going on. You teach Emily welding and then you go to the factory where they make buckets for machinery. You’re trying to get her a job in the factory and then Emily can make you buckets. Really interesting cheers Tom.
Look at all these buckets !
Tom's in bucket heaven! It's good to buy fr9m local businesses, need to support the businesses at home.
That''s one off your bucket list Tom !
@@troyboy4345 😂
Thanks Tom , championing British manufacturing. I find these tour vids fascinating.
Love the little red car with the bucket in it ..... who needs a pickup truck 😂
So interesting, and a impressive operation buckets for every application. 👍👍😊
That Rhinox is some company loved the video today Tom. And they stock some diseases of equipment
Brilliant Tom, so great to see a growing UK manufacturing company 🎉 you looked exited to see the buckets like a sweet shop 😅 they should make a special one for you 😃
Thanks for bringing us along, found that quite interesting. Emily should apply to go part time into the welding shop, there's a good place to get sharp. Thanks for posting....
Thank you for the tour. It was very interesting.
Great video, I ordered a digging bucket and ripper tooth from rhinox at the weekend to fit my 3.5 ton hitachi which they are manufacturing next week so it was great to see the production process and the scale of the factory
Who doesn't love a good mooch round a yard of buckets
nice factory and nice to see How it is made .
Thanks Tom for sharing your tour, It was really good
Working in plant hire buckets are the bane of my life, trying to organise and find them. Diggers would be so much better without them! But I did really enjoy this video, very interesting to see and surprised how manual the process is. Cheers Tom.
Great video! 👍🏻, I would well be at home working there when vauxhall closes down ( very soon) if they need any stores persons/ fork truck drivers! Looks like a good employer! Very interesting 👏🏻👏🏻👏🏻
BUCKETS !! Nice one again Tom and interesting 👍 thanks again 👍
Puffing like an old man Tom! You need to do something about that friend!
Great content remember turning up on a site to go on hire 1st thing I said to the Irish man cut the JCB bucket 🪣 teeth of because I would be digging service drenches so this was about in my days driving a site master would have been handy cheers Tom
What a great tour round Tom, enjoyed that👍👍
Pretty cool! It is amazing when you stop and think about how many different styles of buckets, quick hitches, pins, and all that are out there! It's almost as bad as hydraulic fittings!!!
Its easy to see the joy Tom have while going through the factory.
matey certainly knows his stuff about buckets
Love the sound of bacon cooking ???
Excellent video Tom, very impressive site
Impressive stock 😮
Great vid, very interessting :) Thanks Tom (Should have brought the Wifey though, could make copy of the buckets in the "basement").
Really interesting video ,looked like you were in your element top ❤
Great, more of these please!
I get a chuckle seeing you in that little car your probably a foot taller than me and yet I drive an suv that would probably fit your car and that excavator bucket in lol 😆
I was expecting when the welder lifted their mask it would be Emily. Good idea, the rounded end for the utility trench bucket, how come it's taken so long for someone to think of that.
Drink a shot every time someone says BUCKET! 🤣
Interesting video 👍
Amazing stock levels, I wonder what value is in that four acre site - tens of millions of pounds worth easily.
Just had a quick shufti at their website, and quite impressed with their prices !
Great video Tom very interesting and informative 👍
That's a lot of buckets..
Fascinating video Tom 👍
great video tom
you should collab with clarkson, i bet yall would have good energy.
Fantastic video, some great stock items there!! Did you nip over to visit your old college whilst nearby 😄
Hope they do a nice printed on paper catalogue of their entire range.😊😅😊
Thanks for your Video 😊
I wish telehandler buckets came with a rubber leading edge, a removable one!
now we're bucketing 😂
Very cool stuff Tom!
good video tom
I wondered what was going on when you so effortlessly lifted that hitch @22:57 Can they print them as one piece, or is it multiple parts glued together?
nice workshop vid soon
lol you put the bucket in the car, and that thing was slammed to the floor
Dang., Tom! Do you know everyone in England? I’ve this friend called Dan who was working on “The Knowledge” about 30 years ago… surely you’ve met him…
Were all these buckets manufactured at Rhinox in East Yorkshire?
Not all I’m lead to believe
Looking at buckets for your fronted loader😅😅😅
should've brought emily to weld a few up real quick
Your new bucket seat don’t fit your car very well Tom 🤔😉
Had a quick scan, the majority shareholder of the holding company is 85 years old !!
It's a shame we didn't have a counter for the number of times 'buckets' was said.
Just saying...
It,s about time you visited god's own county 😁😁😁
Where ?
@@Tomlamb980 The only and only Yorkshire.
@ I went to collage there for 4 years
@@Tomlamb980 Leeds,York ?
@ Beverly
Your needing to weld a roof rack on that wee car
1000 buckets please
Anyone count how many times the word bucket was used?
That poor Citroën 😂😂😂
French cars should be in a bucket not carrying them 😂
Why on earth don't they standardise bucket hitches and make them interchangeable? They'd obviously have to account broadly for machine size. The industry needs a governing body like whoever it is that enforces phones etc. to have USB-C nowadays.
Now wouldn’t that have been a great idea, like the 3 point linkage. Unfortunately nobody would agree which hitch to use.
👏👏👏👏👏👏
So, there is not enough power to run the Plasma cutters etc., but the government thinks there is enough power to plug in 100 electric cars.
The power supply size
@sheilabray1620 I think you misunderstood what he was saying, Its not that there isn't enough power in the National Grid to run plasma cutters etc....
What he was actually referring to is the amount of power that they need in their workshops, including them big plasma cutters, would be greater than what their supply currently provides.
National Grid has more than enough power for that kit, just not through their current (and most likely very old and limited) cables to the property
@ 👌
Great video Tom 👍👍🐑 to bad his mike didnt work 🤔🤔