@@DanSmith-cb5vj It’s frustrating when you come across so much negativity and nonsense online, especially when you're just looking to enjoy the content. It’s easy to get caught up in the comments, but sometimes it’s better for your mental peace to step away from the chaos. I’ve learned to filter out the noise and focus on what truly adds value to my experience. It's a lot healthier to preserve your peace than to dive into all the negativity! ✌🧘♀
Being critical does not make one a hater.The show would lose viewers If not allowed to critique. In fact some of the “haters” actually offer valuable insights.
I was removed from his Facebook page for calling him out on some of his questionable techniques and his lack of safety procedures . Of course I'm called a "HATER" by all the fanbois
When he stepped back and said the broken windshield with the scabbed in pieces "looked beautiful" we were being shown just how powerful denial really is.
I think he needs to take ADHD medication because if he would’ve slowed down and listen to Joe he would have not screwed that glass up. Just my opinion everybody’s got opinions some more than others .
I believe your problem is Chad you don't stop and think things out before you do something you're always in a big hurry and a rush to get things done and I really don't understand why
This is getting really sad.. Up until a few weeks ago this vlog was interesting because BadChat let professionals execute his creativity. But now he shows every time how it shouldn't be done, trying to unscrew a spark plug with an unsuitable tool, spraying over rust, breaking a glass window etc.. All we see is tinkering.. Nothing is finished, up until a few months ago I watched his broadcasts every day with appreciation. Now I rarely come to watch and every time I see more decay.. A pathetic hopeless mess to keep the channel going, with or without 50 pushups that have nothing to do with the context. Pull yourself together Chad, hire some professionals who can execute your ideas. I'll come back in a few months, if this channel still exists then..
Here here. You only have to read the comments every day to see how his stubborn nature is now destroying the enjoyment and interest people used to have
"It takes a big man to admit he made a mistake and a weak man to critique him." It's more like it takes a real man to accept constructive criticism and to not dismiss advice just because they think they know it all!!! Chad can't accept that he isn't the sharpest knife in the drawer!
And once again Chad trying to do things as fast as possible caused a big problem, time is money, and destroying an expensive old car part is also money. When cutting something like that windown frame you need to slow down and take your time and measure everything not just once, but twice, and make sure you are making the right cuts. Jolene even told him he should measure it, and he was in such a hurry to get it done, he ignored her advice, then he ruined a $2,000 window frame. So much for doing it fast to save time and money.
Now this is only my option I think the reason he did not ask PAUL to cut the glass is probably because he must have pissed him of as well as we all know no one wants to work with him
No. It’s because he’s a cheap penny pincher and did not want to pay the man his worth. You could see the last time Paul was there Chad watched his every move like a hawk because he because he wanted to learn enough so he didn’t have to pay Paul again.
It takes Jolene to quickly figure out why the top frame spigots don't go down into the sides because Chad's welded blobs penetrated the frame whilst frustrated Chad BEATS on it all with a hammer on the CRACKED glass. Well, best of luck moving forward.
We currently have openings in “Bad Chads speed school” do you find yourself wasting time measuring, thinking things over, planning each move? Here at Bad Chads school of speed building we will show you how to eliminate those time wasting ideas and rush through and complete your project in twice the time it would take a normal person to complete a task! You could save money, you might be successful, but if that fails we’ll show you how to quickly fix or disguise your mistakes and most people won’t even be able to notice all of them! So if speed is what you need, then the Bad Chad speed course may be for you!!
Car was restored before the last guy got it. Car needed strip/paint. Could be done in sections( like he did the door). Car should not have been chopped! Doesn't make me a hater. It's like using the Mona Lisa as a canvas for your finger painting. He could have built what he is building using a 5 window coupe!
I am a fan however, a big man (as he says) would have listened to his wife and measured. Who uses a piece tape instead of a measuring tape or laser? Plus he has a glass cutter but used a grinder to cut glass. Why?
that window is done finished!! it will not pass safety with the cracks in it. And why would you not use the glass cutting tool, . plus that glass is old and brittle , who ever told ya to use a grinder is a ......!!!
You should have listened to what viewers were advising about not touching this old survivor. Now you have interfered in its karma and will now continue to pay the toll. Not every vehicle needs customizing. Bad move Chad.
its karma was 26 years in the back of a garage. it got a new life its happy I see and feel it people are talking about it seeing it its out of the dark.
Their collective ego couldn't stand hearing the opinions of their viewers.., the 'chop' is their passive aggressive rebellion meant simply to piss the 'viewers off', while trying to act 'otherwise'...
Makes me sad he even started to modify this car. It should have been properly restored. It already has a rebuilt engine in it and is very solid. Would have been an excellent car to restore and worth a lot more than it's going to end up as.
@@JohnDisheaux what do you mean you're buying it right now by responding to his videos dum dum you like giving him money. But keep the hate going it just gives him more money.
@ those birds are insane. Getting all bent outa shape about calling out chad cutting that glass with a grinder. Thats insane. And the window broke. And he cut the frame to short. Fail after fail.
Let me just say I am a big fan of Chad and Jolene....and I would like to point out to everyone in the Bad Chad nation to sit back and pray for this couple. Over the last few weeks I feel like we are watching Chad self destruct right before our eyes. He has always been hyper and going several different directions at the same time, but lately it's different. Something is off...I don't want to see something happen to the mad metal man or this wonderful couple and the relationships with their friends . Concerned,praying for you both!!!
I have noticed the change as well, as though he is scared and having difficulty with not knowing what to do to keep things tight and those slight giggles don't sound so loving, I said it a little while ago and I'll say it again, I don't see the Bagatti getting done anytime soon, when your in the public eye It must be really hard to continue when you and yours has a business together and keep a straight face when the relationship begins to fail so does the business, gotta figure out why he pushes so many away and the queen is his deep love and if she is next its gunna hurt
Sadly I agree. Her demeanor has changed a lot and her giggles seem to be more like she's laughing at him. I think she has had it. Plus a 20 year age gap doesn't help. Hopefully they will figure things out...
So here I am sitting on my couch drinking beer watching a guy screw up a car. The good part is this is a comment section and I’m allowed to say just about whatever I want. I’m free to be me and say whatever I want to. The nice part is somebody will comment on this anyway with something different than the way I feel. That’s ok, I’m a big boy I can take it. It still doesn’t change the fact that he did several catastrophic things to mess up this car.
Yea i like all the people calling out the comments. This is getting more insane by the day. Imagine thinking the way to cut 100 year old glass or any glass was with an angle grinder ffs.
Yep, the next step is all the negative commenters will get ghosted. I hope they don't go down that route. I have watched a few RUclips channels where they go off the rails and viewers start calling them out. Then the creators just start blocking individual viewer comments from being published, the way to know if you've been ghosted is to load their video in the incognito mode hand see if your comment appears there.
You have a glass guy so why are you cutting it? I only ask cause you came home from Florida wanting to build a 1,000000 dollar car so I'm assuming that you have a few hundred for a glass guy to cut it 😂
Have you ever cut glass with an angle grinder, is that insane or can it be done?? Genuine question. Ive seen it done with a glass cutter, alcohol and a flame on laminated glass but never a grinder😮
Chad! First of all, who cuts a windshield glass with a zip disc? You were in a hurry, lacked preparation and failed to have a proper glass cutting tool available. Then, after having numerous chip outs and "cracks", your face-saving comment is "it's not in the driver's view". Seriously? And now, what do you do? You take the zip disc to it again. Why not send it out to Paul to get a new piece cut without chips and cracks. Then correct the frame to fit the new glass and either get it re-chromed or polish it to match. Chalk any cost up to educational expense. And quit agonizing about your mistake on camera. Jeesh! Enough already.
Same with the speed in cutting the drivers side post where you cut the wiper blade pipe! You cut the post then tried to open it up or pull it up yet then cut it off again when you cut the post down to the bottom of the tape BUT had you taken the time to think it thru the hose could have been left that 3 inches higher to be able to use it! Yup haste!
I have been watching for some time and this man has some real issues. It's pretty sad as I watch him slowly spiral out of control. Jolene be careful I am afraid this is an accident going somewhere to happen.
5 minutes into this video and he's already running a Mach 2, so much for slowing down. At least you owned up to the mistake and i have much respect for you doing that. Slow down, no need to rush, and never forget, you and Jolene are a team, you'd be nothing without her. Take your time, I for one don't care if it takes you 2 hours in two videos to do a process. I know what goes into doing this kind of work, I just don't video it and post it for views. I've been at it 45 years and its not a job to rush in too.
I have told you all along that you cannot keep going on your own and because of your stubborn streak you have not only completely destroyed the entire windscreen and even now your penny pinching of simply not taking the old screen and getting a new one cut takes everything away from the car. Being economical is one thing but you are turning a perfectly good classic car into a mobile scrap heap. You are not only wasting your talents but destroying your reputation by continuously cutting corners. Yes anyone can make a mistake but you are long enough at what you do and should know better. What you should have done was to simply leave the car as it was or else completely strip it and rebuild it like a brand new vehicle. You are forever going on about doing such and such would be wasting time and then you spend days on end trying to work on the engine. The gas tank is the exact same thing. Now the windscreen you are worrying about the windscreen frame moreso than getting a new screen. The Bugatti is nowhere near completion, as roughly 5 or 6 other projects remain the same. The workshop used to be a hive of of activity with several projects on the go at the same time whereas now the silence is killing me
If I recall the engine is a rebuilt from a 1936 that has replacement bearings and has seen little running time. Pretty sure that's what the previous owner told him.
I wonder what the guys in the car shops that they visited in Florida think about his performances...lol Especialy the one man body man at Saltworks...lol
Everyone in the world from the beginning of time had to take things head on and learn through trial and error with what they wanted to do. No one is born with experience or knowledge. If people like Albert Einstein listened to his critics he would have never overcame the challenges he faced. I applaud you on everything you do, what you do, and your honesty. Of course there's always someone with more experience. They obviously had to learn and start from scratch. I love too to do everything myself and at the end of the day practice makes perfect and repetition makes retention. Your channel, your stuff, and your way is cool to me. You're brave, intuitive, artistic, meticulous, and badass. Keep doing you no matter what anyone's opinion is regardless if it's right or wrong as long as it makes you happy and you have proved Time After Time you find what works best and gain more knowledge and experience with every situation you decide you want to tackle on your own whether you know what to do or not.
They make glass cutters for a few dollars at every hardware store. Your grinder obviously builds heat... wet diamond discs are the way to go with glass. Flat windshields are able to be cut by any glass shop. Research on the web would have been a smart move. Narcissists are scary ..... Take good care Jolene
Chad talks the talk yet fails to walk the walk so he does pushups to compensate in his own mind that is least he finally admitted his bad chad flexible chrome didn't look good 😉
the time it would have taken to measure is not proportional to time it takes to fix it -----BUT now we get more content...LOVE the channel. I have at least 10 tape measures but i still use my EYECROMETER
Jolene this comment is meant for Chad ( Chad do what you enjoy, this last year you seem like you are just trying to make content for the viewers, when you were working on the Bugatti for Jolene you seemed so much happier and when you did her race car and hauler you had that same love in your eyes , and it was nice to see the two of you working on them together as a team. i could watch you work on the Bugatti for 6 months straight to see it finished . You seem to be at your best when you are making a custom creation . sorry if i am long winded but i just had to say i think the Bugatti is a piece of art that should be driven by your Queen.
Jolene’s value is not just in her beauty. Why can he not stop commenting on her looks? There is a facetiousness to his comments. This does not seem sustainable. Something is eating at this man’s soul.
Some you have made a great point the best fix after such careless mistake was to get a new piece of glass to fit the new size of the frame and chop the windshield opening by the 3/4 inch mistake. I've always said to be human is to make mistakes but the true display of a master of a trade is to fix that mistake so no one ever knows of the mistake.
Since ive started watching his videos he has went way downhill! Hes mentally off his damn rocker!! If i was Jolene theres no way i could stay in the Same house with him!! She will wind up hurt or dead someday!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I miss the old builds of taking nothing and making something instead of taking something and making nothing,
Have to agree 👍
Spot on😂
i know right ESPECIALLY A BEAUTIFUL CLASIC LIKE THIS ONE HUH
@@stevebennett3248 it sounds like someone needs the wambulance called
He making money now. Back then he had nothing.
I enjoy reading the comments more than watching the video.
Thanks for your support hope you continue
Not me. I use to read a lot of comments on Chads/Jolenes videos. Too idiocy spewing out, that it only irritates my peace of mind.
@@plumcrazyrt5741 haha! For sure
@@DanSmith-cb5vj It’s frustrating when you come across so much negativity and nonsense online, especially when you're just looking to enjoy the content. It’s easy to get caught up in the comments, but sometimes it’s better for your mental peace to step away from the chaos. I’ve learned to filter out the noise and focus on what truly adds value to my experience. It's a lot healthier to preserve your peace than to dive into all the negativity! ✌🧘♀
Speaking of comments, don’t forget to like and subscribe.😊
Being critical does not make one a hater.The show would lose viewers
If not allowed to critique.
In fact some of the “haters” actually offer valuable insights.
I was removed from his Facebook page for calling him out on some of his questionable techniques and his lack of safety procedures . Of course I'm called a "HATER" by all the fanbois
Just don't be a douche. Suggestions are welcome but if you clowns come on here bashing him then us true fans will call you out.
AND SOME ARE MEAN& NASTY
@@ruthroake38 whoever does that I'm put here to troll the haters do you need a wambulance called for you too.
@@BigDaddykik1973i am too brother
A wise man knows he has a lot to learn.. a fool believes he knows everything..
Which one is he?
Subscribe and like and dont forget only M-F now no weekend's
@@ScottDouglas-r1h what one are you?
The latter one...lol
A real man admits to his mistakes.
When he stepped back and said the broken windshield with the scabbed in pieces "looked beautiful" we were being shown just how powerful denial really is.
I think he needs to take ADHD medication because if he would’ve slowed down and listen to Joe he would have not screwed that glass up. Just my opinion everybody’s got opinions some more than others .
signs of a sociopath and certainly not an artist like he thinks he is..
@@FastMoparSF how fast is your Mopar?
You should have listened to Joline
I dont think you needed to point that out considering he pretty much admitted to it
Yes, like that was so yesterday, and Gary is complaining now.
Jolean doesent pipe up much on the show ,but when she does you should think twice and listen
doesent ?
@@BigBlock-wf3mh I was able to read pass the error but here it is 'does not'😄
Facts
Sometimes some jobs need to be done by the correct person
WOW, you mean you never made a mistake before ….. never?
I believe your problem is Chad you don't stop and think things out before you do something you're always in a big hurry and a rush to get things done and I really don't understand why
OCD
yup
@@mikeschauger5498 Self regulation is possible. Many with OCD train themselves to self regulate.
Yes but he gets things done, mostly,good, how about you what are you working on
@@mothereartha7 Some say that 'never completed' is evidence of 'not' getting things done...
This is getting really sad.. Up until a few weeks ago this vlog was interesting because BadChat let professionals execute his creativity. But now he shows every time how it shouldn't be done, trying to unscrew a spark plug with an unsuitable tool, spraying over rust, breaking a glass window etc.. All we see is tinkering.. Nothing is finished, up until a few months ago I watched his broadcasts every day with appreciation. Now I rarely come to watch and every time I see more decay.. A pathetic hopeless mess to keep the channel going, with or without 50 pushups that have nothing to do with the context. Pull yourself together Chad, hire some professionals who can execute your ideas. I'll come back in a few months, if this channel still exists then..
Here here. You only have to read the comments every day to see how his stubborn nature is now destroying the enjoyment and interest people used to have
@@edmundharkin9472 please don't let a YT video do this to your life
adious
@@ernestlewis1718 I would not tell anyone don't watch, but honestly I think its in their best interest not to watch.
@Barrett50-j4hes here again old barrett 50 can't help himself but comment
Could have sold the original glass to someone who needed an original….and put the money towards a properly cut piece. Haste makes waste
But That would make too much sense.
What the Hell is going on over there??
So true. He is doing that with the roof
Flat Glass isn't worth the freight be different if it was curved and rare
Major twice cut once
"It takes a big man to admit he made a mistake and a weak man to critique him." It's more like it takes a real man to accept constructive criticism and to not dismiss advice just because they think they know it all!!! Chad can't accept that he isn't the sharpest knife in the drawer!
And once again Chad trying to do things as fast as possible caused a big problem, time is money, and destroying an expensive old car part is also money. When cutting something like that windown frame you need to slow down and take your time and measure everything not just once, but twice, and make sure you are making the right cuts.
Jolene even told him he should measure it, and he was in such a hurry to get it done, he ignored her advice, then he ruined a $2,000 window frame. So much for doing it fast to save time and money.
He's not even In the draw😅
i just cant see how those cracks are not going to grow bigger.
Put a fork in it, it's done, the cracks will grow and it'll break. Might as well just put a piece of acrylic in it.
You are wasting your time with that glass, it’s gonna keep on cracking. Stop now and get new glass man.
A guy if they get bigger they'll change the window no biggie it's just flat glass
@@ScottDouglas-r1h Got it👍
@@ScottDouglas-r1hit won't matter he is never going to drive it
Now this is only my option I think the reason he did not ask PAUL to cut the glass is probably because he must have pissed him of as well as we all know no one wants to work with him
No. It’s because he’s a cheap penny pincher and did not want to pay the man his worth. You could see the last time Paul was there Chad watched his every move like a hawk because he because he wanted to learn enough so he didn’t have to pay Paul again.
💯
Nobody is going to criticize you for taking the time to do the job right and being organized with the tools needed for the project.
They talk shit on his cuffed pants, who you kidding?
But yeah, that’s why he says he don’t wanna do TV because they rush him. That’s why he quit the TV show.
It takes Jolene to quickly figure out why the top frame spigots don't go down into the sides because Chad's welded blobs penetrated the frame whilst frustrated Chad BEATS on it all with a hammer on the CRACKED glass.
Well, best of luck moving forward.
I don't want to scratch it bit late for that
We currently have openings in “Bad Chads speed school” do you find yourself wasting time measuring, thinking things over, planning each move?
Here at Bad Chads school of speed building we will show you how to eliminate those time wasting ideas and rush through and complete your project in twice the time it would take a normal person to complete a task! You could save money, you might be successful, but if that fails we’ll show you how to quickly fix or disguise your mistakes and most people won’t even be able to notice all of them! So if speed is what you need, then the Bad Chad speed course may be for you!!
@user-bo3tj2pi6s Why don't you show everyone how its done.
lmao 🤣
😂😂😂
what we show you is how to profit off the weak simple minded on the internet..
And don’t forget about the people with no sense of humor!!!!
The mistake was chopping this car in the first place. I’d have done a proper restoration
agree what will be next?
No you wouldn't! You would not pay the cost to do a "proper restoration".
It was a nice car.
Show
Us your restored vehicle…
Car was restored before the last guy got it. Car needed strip/paint. Could be done in sections( like he did the door). Car should not have been chopped! Doesn't make me a hater. It's like using the Mona Lisa as a canvas for your finger painting. He could have built what he is building using a 5 window coupe!
he hasn't learnt anything
" quick as we can"
" quick as we can"
What you didn't learn in school has come back to haunt you
@@SchwinnXchange "learnt"
I am a fan however, a big man (as he says) would have listened to his wife and measured. Who uses a piece tape instead of a measuring tape or laser? Plus he has a glass cutter but used a grinder to cut glass. Why?
He couldn’t figure out how to put the glass cutter in the grinder 😂
@@leblanckerry4826 lmao or it woulnt fit maybe his brain told him not to 🤣
They won't get any bigger cause he will never drive it!!!
Not married
@troyhonda71
They got engaged about 7 years ago. They're not married yet?
that window is done finished!! it will not pass safety with the cracks in it. And why would you not use the glass cutting tool, . plus that glass is old and brittle , who ever told ya to use a grinder is a ......!!!
none of the cars pass safety
He told himself to use a grinder, it was his brain
Would of been easier to chop the post again since you have to get new glass anyway but u done went and frugged it up welding on it
Yo chad, maybe next time you listen. To Jolene, she told you to measure it to make sure it's right.
No JOLENE you call the shots maybe thing go right not left
PROBLEM IS CHAD LIKE MEASURE ONCE AND CUT 2 TIME ME THINK O
NO! he is doing this on purpose to get More Views, she is in on it, It's working, Bad Chad RUclips marketing genius
@@cessealbeach they know how to get folks to ride the tilt-o-wheel
Wasn’t that yesterday?
Quick and cheap now its slow and expensive as you say time is money.i dont think he learns by mistakes.
Beautiful, He says beautiful, cracked piecing together , Jolene probably threw the tape away , tune in to learn how to build million dollar cars
You should have listened to what viewers were advising about not touching this old survivor. Now you have interfered in its karma and will now continue to pay the toll. Not every vehicle needs customizing. Bad move Chad.
its karma was 26 years in the back of a garage. it got a new life its happy I see and feel it people are talking about it seeing it its out of the dark.
Their collective ego couldn't stand hearing the opinions of their viewers.., the 'chop' is their passive aggressive rebellion meant simply to piss the 'viewers off', while trying to act 'otherwise'...
@@dn734 have you ever been abducted by aliens?
@@Barrett50-j4h Besides that it has a happy new life, what else did that car 'say' you?
@@dn734 I said people are talking "about" it.. no where did I say its talking to me, your making shit up. and said I see and feel it..
Stop winging it,it only makes a fabricator look foolish & costs $$
Florianópolis Santa Catarina Brasil ❤
How many cars you build ,
I think the window screw up is called Kar Karma. Should have just left this one alone.
Shoulda left it alone!
What the Hell is going on in there??
Speaking of Hell, don’t forget to like and subscribe!😊
Imagine Chad trying to figure out how a metric tape measure works ?
Imagine you not negative commenting one time as u tune in for years now …. At least hit the like 👍🏻
Makes me sad he even started to modify this car. It should have been properly restored. It already has a rebuilt engine in it and is very solid. Would have been an excellent car to restore and worth a lot more than it's going to end up as.
Meanwhile never once did you say " I should have listened to Jolene"... Nice job 🤣
His ego won't let him
He won't admit she right he thinks he knows everything that his way is always the way to do
Last video he did.
Fred Flintstone are you watching today? Chad is using your idea's No window or motor.
Glenn we know you are watching that is the most important thing. thankyou for your continued patronage
SLOW DOWN!
He is always in a hurry. Dam slow down your not on a schedule no one is going to buy it anyhow you screwed it up
AMEN
i know right he devalued that car by 80% huh 😡
AMEN AMEN AMEN slow ta EFF down
@@JohnDisheaux what do you mean you're buying it right now by responding to his videos dum dum you like giving him money. But keep the hate going it just gives him more money.
@@JohnDisheaux LOL he built cars for a living what do you do other than being a keyboard warrior.
It’s going to cost more than the cost of the car because when your done it’s going to be salvage price
You'll always have your bootlickers, telling you it's great and well done. But, using a metal grinder to cut glass is ridiculous.
I cant comprehend people sticking up for him on that. Its mental.
lol bootlickers,, I know what u mean,, sucking up in the comments section,, like the guys who say hi to the dog,, the dog can’t read
@ those birds are insane. Getting all bent outa shape about calling out chad cutting that glass with a grinder. Thats insane. And the window broke. And he cut the frame to short. Fail after fail.
@@richardsumner7172maybe Jolene reads the comments to Fina?
@@ScottDouglas-r1h do you feel how you "act" is "normal"
It's not fixed until you send the frame out to be rechromed. Until then it's just a Band-Aid on a bullet hole.
Let me just say I am a big fan of Chad and Jolene....and I would like to point out to everyone in the Bad Chad nation to sit back and pray for this couple. Over the last few weeks I feel like we are watching Chad self destruct right before our eyes. He has always been hyper and going several different directions at the same time, but lately it's different. Something is off...I don't want to see something happen to the mad metal man or this wonderful couple and the relationships with their friends .
Concerned,praying for you both!!!
Definitely walking on eggshells.. feeling the same while watching. Noticing Jolene’s nervous giggles lately.
I have noticed the change as well, as though he is scared and having difficulty with not knowing what to do to keep things tight and those slight giggles don't sound so loving, I said it a little while ago and I'll say it again, I don't see the Bagatti getting done anytime soon, when your in the public eye It must be really hard to continue when you and yours has a business together and keep a straight face when the relationship begins to fail so does the business, gotta figure out why he pushes so many away and the queen is his deep love and if she is next its gunna hurt
Sadly I agree. Her demeanor has changed a lot and her giggles seem to be more like she's laughing at him. I think she has had it. Plus a 20 year age gap doesn't help. Hopefully they will figure things out...
Is this the guy that was talking aboat doing a million dollar build the other day ? 😂😂
jolenes bugatti?
Not sure is that what you read? or are you trying to make something up to fit your narrative?
@@ScottDouglas-r1h Thanks for joining 3 days ago and all caught up what's going on here.. hope to see you tomorrow,, remember no vids on the weekends
@@ScottDouglas-r1h That's right and it's value will be far from a real one.
@@Barrett50-j4h triggered 😢
Give Fina and Jolene the tape measure.
thanks for watching pound that thumbs up help the channel grow
..Barrett the seagull poster has entered the chat....🤡💩
@@stevo184 what other emojis you have?
@@Barrett50-j4h Ok sure thing...
@@RustySpurs63 thank you for commenting every comment every click helps
Chad, your ego by not listening may costs you $2,000
So here I am sitting on my couch drinking beer watching a guy screw up a car. The good part is this is a comment section and I’m allowed to say just about whatever I want. I’m free to be me and say whatever I want to. The nice part is somebody will comment on this anyway with something different than the way I feel. That’s ok, I’m a big boy I can take it. It still doesn’t change the fact that he did several catastrophic things to mess up this car.
Yea i like all the people calling out the comments. This is getting more insane by the day. Imagine thinking the way to cut 100 year old glass or any glass was with an angle grinder ffs.
It won't be me. I completely agree with you.
Yep, the next step is all the negative commenters will get ghosted. I hope they don't go down that route.
I have watched a few RUclips channels where they go off the rails and viewers start calling them out. Then the creators just start blocking individual viewer comments from being published, the way to know if you've been ghosted is to load their video in the incognito mode hand see if your comment appears there.
@@Zedsdead83 Imagine if he cut it with a kitchen fork? or a rubber band?
I am so happy that Chad shows us all the ways we can save time and make our builds fun :)
You’ll never learn cause you’re never wrong
He already admitted he was wrong, yesterday & today, you need to watch the shows , instead of complaining.
Great recovery Chad, and the chop looks good, she’s got a lower profile, more sleek looking.
Just thinking.....maybe you can cover the whole frame with Bad Chad Chrome...........
Please stop with the push ups
Please start with the pushups
Have you ever heard..
.....all the clowns are not in the circus?
Standard Bad Chad " shit show" is addictive to watch...
I heard Jolene say measure it and no on listened to her 😊
@@barrybishop203 i listened to her... and measured
The difference between Bad Chad and a professional: a tape measure, and a glass cutter.........
i can't believe after all the yrs his been hacking shit up his has not learned anything
Thank you for your continued support through the years hit the thumbs up and thanks again
Water and electricity go well together
His quote in the video tells you all you need to hear. “The only way I know things is failure”.
Damn, that’s sad.
Jolene, I wouldn't say anything to Chad, he's not going to listen to anything you say anyway, Jerk.
Jolene never looks happy
Would you be happy , with Chad around
I think its great they are working together and she can be more than just the camera person. she seemed fine to me.
She just lost her mother, Jolene should take some time off instead of doing this. Healing is way more important than filming that car.
You have a glass guy so why are you cutting it? I only ask cause you came home from Florida wanting to build a 1,000000 dollar car so I'm assuming that you have a few hundred for a glass guy to cut it 😂
That's money he would have to dish out
Cheesy Chad hacking another non running vehicle, Sad.
Do you need a wambulance called
@ Why u mad
@@Varo3121 I looked at your channel it says it all about you!
@@Barrett50-j4h thanks for the views !
you normally start with a POS but you made it to a new level... took a nonPOS and created a better POS. Keep pattin yourself on the back
Best comedy on RUclips.
Glazier here. Smh just get a shop to cut it.
Have you ever cut glass with an angle grinder, is that insane or can it be done?? Genuine question. Ive seen it done with a glass cutter, alcohol and a flame on laminated glass but never a grinder😮
Chad! First of all, who cuts a windshield glass with a zip disc? You were in a hurry, lacked preparation and failed to have a proper glass cutting tool available. Then, after having numerous chip outs and "cracks", your face-saving comment is "it's not in the driver's view". Seriously? And now, what do you do? You take the zip disc to it again. Why not send it out to Paul to get a new piece cut without chips and cracks. Then correct the frame to fit the new glass and either get it re-chromed or polish it to match. Chalk any cost up to educational expense. And quit agonizing about your mistake on camera. Jeesh! Enough already.
Bad Chad Comedy hour Part 2. This is better than watching Rodney Dangerfield.
Bad Chad comedy hour part 2. This is funnier than watching Rodney Dangerfield videos.
Wow look at these two professionals sitting on the couch drinking beer .. do you own a wrench? You know what a wrench is? 😂
Jeesh, enough of the bitching.
@@darkhalfz3736 I know what a glass cutter is ..or smart enough to spend the money to have it done ..
Same with the speed in cutting the drivers side post where you cut the wiper blade pipe! You cut the post then tried to open it up or pull it up yet then cut it off again when you cut the post down to the bottom of the tape BUT had you taken the time to think it thru the hose could have been left that 3 inches higher to be able to use it!
Yup haste!
I have been watching for some time and this man has some real issues. It's pretty sad as I watch him slowly spiral out of control. Jolene be careful I am afraid this is an accident going somewhere to happen.
How long until he goes all Trevor from Gta5?
5 minutes into this video and he's already running a Mach 2, so much for slowing down. At least you owned up to the mistake and i have much respect for you doing that. Slow down, no need to rush, and never forget, you and Jolene are a team, you'd be nothing without her. Take your time, I for one don't care if it takes you 2 hours in two videos to do a process. I know what goes into doing this kind of work, I just don't video it and post it for views. I've been at it 45 years and its not a job to rush in too.
Look at him trying to make himself look good for making a mistake hes just making a big ass out of himself 😂
If that glass is flat with just the curve this is not a 2k mistake. I can get these made for under $300. Tempered. And pattern cut. Smh
I have told you all along that you cannot keep going on your own and because of your stubborn streak you have not only completely destroyed the entire windscreen and even now your penny pinching of simply not taking the old screen and getting a new one cut takes everything away from the car. Being economical is one thing but you are turning a perfectly good classic car into a mobile scrap heap. You are not only wasting your talents but destroying your reputation by continuously cutting corners. Yes anyone can make a mistake but you are long enough at what you do and should know better. What you should have done was to simply leave the car as it was or else completely strip it and rebuild it like a brand new vehicle. You are forever going on about doing such and such would be wasting time and then you spend days on end trying to work on the engine. The gas tank is the exact same thing. Now the windscreen you are worrying about the windscreen frame moreso than getting a new screen. The Bugatti is nowhere near completion, as roughly 5 or 6 other projects remain the same. The workshop used to be a hive of of activity with several projects on the go at the same time whereas now the silence is killing me
Wow why don’t you write a novel, what a miserable life you must have, to be so rude
Should we call the police to help you with the guy holding the gun on you forcing you to watch something you don't like??let us know karen..
@@mothereartha7 he sounds like he is reading the riot act to his child.. another misplaced soul in life.
Chasing his tail like usual and not thinking about it or planning it or measuring . Can’t build quality that way
He don't plan anything , he just goes for it ,
Thanks for supporting the channel
@ it happens every so often . More cash for Jolene to run off with when she finally does ! And she will at some point and I don’t blame her
@@Chrisgaskill75 did you hit the thumbs up and sub? and share the channel to friends and family thanks again.
to be fair, using tape IS measuring - it's jumping from one measured piece to another that's the problem.
I wouldn’t let him work on a wheelbarrow. How the hell did he get a following ?
Such a silly mistake shouldn't have happened.. It should have been $2000 to fix the broken engine.
If I recall the engine is a rebuilt from a 1936 that has replacement bearings and has seen little running time. Pretty sure that's what the previous owner told him.
dont you need a new glass cut,thought it was cracked
They'll use what they have 😅
re-cut the glass it's already cracked what more can it hurt those cracks even if hidden will run over time anyway
Why would you put a broken piece of glass back in I'm in Ontario can you get a piece of glass cut and installed price 100.00
@ Nova Scotia engineering good enough for who it’s for
@@virginiaman1960 thanks for tuning in, another vid tonight please attend we depend on you.
The new hiltz logo needs to be a Jackass...draw that and send it in for the 500
Fantastic 😅
is he a jackass or you? answer that honest.. seems they do ok and as they please, and make money off you and me..
How about Shrek the Donkey ?
Hurry hurry hurry!!!!
You would never make it in an actual body shop!
I wonder what the guys in the car shops that they visited in Florida think about his performances...lol Especialy the one man body man at Saltworks...lol
Jobs like this trim fix is where a TIG comes in handy. No spatter and little to no grinding needed.
Get a new glass cut
That would cost money. Chad doesn’t care to spend money on these projects.
Everyone in the world from the beginning of time had to take things head on and learn through trial and error with what they wanted to do. No one is born with experience or knowledge. If people like Albert Einstein listened to his critics he would have never overcame the challenges he faced. I applaud you on everything you do, what you do, and your honesty. Of course there's always someone with more experience. They obviously had to learn and start from scratch. I love too to do everything myself and at the end of the day practice makes perfect and repetition makes retention. Your channel, your stuff, and your way is cool to me. You're brave, intuitive, artistic, meticulous, and badass. Keep doing you no matter what anyone's opinion is regardless if it's right or wrong as long as it makes you happy and you have proved Time After Time you find what works best and gain more knowledge and experience with every situation you decide you want to tackle on your own whether you know what to do or not.
They make glass cutters for a few dollars at every hardware store. Your grinder obviously builds heat... wet diamond discs are the way to go with glass. Flat windshields are able to be cut by any glass shop. Research on the web would have been a smart move. Narcissists are scary ..... Take good care Jolene
I AGREE WITH YOU THIS DUDE IS EGOCENTRIC AND WON'T ADMIT IT HUH I FEEL BAD FOR JOLENE TOO
Like clint eastwood said ( a mans gutta know his limitations) chads limitations stop when he gets out of bed😂😂😂🎉
Learn to cut glass and learn to listen to ur better half
Speaking of learning, don’t forget to like and subscribe!😊
Chad talks the talk yet fails to walk the walk so he does pushups to compensate in his own mind that is least he finally admitted his bad chad flexible chrome didn't look good 😉
Why not just slow down, its a marathon not a sprint race. You forgot the step of measure twice cut once.
Really bangin it outta the park lately there b'y !!
Putting cracked glass into a frame is no no , cracks will travel with vibration 😢
the time it would have taken to measure is not proportional to time it takes to fix it -----BUT now we get more content...LOVE the channel. I have at least 10 tape measures but i still use my EYECROMETER
You'll never learn if you're never wrong
Jolene this comment is meant for Chad ( Chad do what you enjoy, this last year you seem like you are just trying to make content for the viewers, when you were working on the Bugatti for Jolene you seemed so much happier and when you did her race car and hauler you had that same love in your eyes , and it was nice to see the two of you working on them together as a team. i could watch you work on the Bugatti for 6 months straight to see it finished . You seem to be at your best when you are making a custom creation . sorry if i am long winded but i just had to say i think the Bugatti is a piece of art that should be driven by your Queen.
Arrogant.
🤣
Yes you are
Im still waiting for the engine to fire up
Don't hold your breath!
how long will you wait? and what happens when you stop waiting?
Jolene’s value is not just in her beauty. Why can he not stop commenting on her looks? There is a facetiousness to his comments. This does not seem sustainable. Something is eating at this man’s soul.
What a crappy job...
Run girl 🏃♂️ 🏃♂️ 🏃♂️ 🏃♀️
Some you have made a great point the best fix after such careless mistake was to get a new piece of glass to fit the new size of the frame and chop the windshield opening by the 3/4 inch mistake. I've always said to be human is to make mistakes but the true display of a master of a trade is to fix that mistake so no one ever knows of the mistake.
Thats what happens when you think you know everything 😂
Since ive started watching his videos he has went way downhill! Hes mentally off his damn rocker!! If i was Jolene theres no way i could stay in the Same house with him!! She will wind up hurt or dead someday!
Yikes I hope not. But she is wasting her life at this point. 7 DAYS A WEEK in some dirty garage. NO THANKS
Stay off the blow
“Remember if you not making mistakes you’re not doing nothing “ if you know what I mean ….well then I don’t understand then
Tim you dont understand you been trolling here for years to no avail, so obv there are some learning issues with you.
Wonder what a glass shop would have charged to cut the windshield?
Wouldn't be 2k😂
Probably $50 or less.
Well Chad I would say your like a Bull in a china cabinet 🤓