We Bought the Cheapest Full-Suspension Go-Kart and Swapped in a Racing Engine!
HTML-код
- Опубликовано: 9 янв 2025
- To get 50% off your first order of CookUnity meals, go to www.cookunity..... CookUnity connects you
with top chefs from across the US, delivering their signature dishes fresh to your door. With
hundreds of meals to choose from, there’s something for everyone! Use our code carsandcameras50 at checkout!
Thanks to CookUnity for sponsoring this video!
Thanks for Watching!
Go Power Sports Parts Used in Today's Video:
72mm Tillotson racing block: bit.ly/3twXZTM
72mm Tillotson piston: bit.ly/3NMSEi3
1.3 roller rockers: bit.ly/3m2W2XI
58mm crankshaft: bit.ly/3RBNjv3
Billet cylinder head: bit.ly/3O4IGd2
Juggaverter: bit.ly/3ahxWlD
24 flat slide: bit.ly/2NbWOnp
Fire 265 cam: bit.ly/3kdqTze
Side cover stud kit: bit.ly/3UTOE0U
Head stud kit: bit.ly/3hYqLXi
40” throttle cable with bend: bit.ly/3tLZYQP
Throttle assembly: bit.ly/3TRxpMd
Fuel line 3/16 non hardening: bit.ly/32iAlNe
Engine plate: bit.ly/3W9Jnoq
RLV muffler: bit.ly/3OcZT0M
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Get 50% off your first order of CookUnity meals - go to
www.cookunity.com/carsandcameras50 and use our code carsandcameras50 at
checkout to try them out for yourself! Thanks to CookUnity for sponsoring this
Video!
Ty John
It would be fun to see what you can build this into. Long travel would be a good idea.
Could you post a link of where you got the kart? Great videos guys I was waiting for yall to get your hands on one of these
Widened it a lengthen it fs then get a way better time
If you moved the shock mounting points you could get another inch or two of height and clearance for the engine.
I just realized when John hit tree and Ike ran over yelling buddy.
They are just like Gilligan and the skipper.
This thing is a wild time!
i’m boutta blow
What is the name of it?
Adrenaline rush all the way with this little racer. Thanks.
Long travel, 12" wheels, widen 8", lengthen 6", and tilt the bars straight up 🤙🏻
39:42 3 wheels off the ground says it all!!!! 🤣
“We do not recommend” literally the most awesome thing you’ve ever built!😂 Loved it guys, best episode in a while!
John was the happiest little kid for the first 5 min he couldn't stop giggling lol
Yeah for $1000 it's a piece of shit. But this video was great, glad they did before and after it was very entertaining.
I love it, the chassis twist and wheels off the ground is mayhem is sick. I absolutely would like to see you lengthen it 6" and add 6" of track with the slightly larger knobby tires, that would be slick.
Knobby tires and it would just flip anywhere it went
Definitely!!!
That’s the most I’ve laughed at your videos in a while. It’s nice to just go back to the raw reactions
Imagine with a bit of NOS! 🤣
When do we get the story on the opel gt
Only been on lift two years in background. Lol
I asked the same thing several videos back
They are never doing anything with the opel it's been there the whole time they been filming at this location over 5 yrs it's just shop art 🎨
I started to say,...I hope they aren't thinking electric,...but,...who knows, ...
I would assume they rent the shop and it might not be theirs.
Man for a grand I can't believe somebody would sell this with so many broken parts 😢. But you guys did one great job fixing it 😊
Probably all damaged in shipping. Which doesn’t excuse poor packaging from the manufacturer.
Seems like about double what that thing is worth, when did basic gokarts get that expensive.
I didn't even pay for it and I was upset when I saw the bent mounts then I saw the shot of the broken wheel, that actually got me mad, I straight up said wtf😠
I know these dudes can fix it no problem but to have to fix ANYTHING after paying $1,000 for this, geez man
@@emmajnation-emmaI work at UPS, you are 100% correct. There is no way to guarantee any package that comes through our building doesn't get stepped on, rolled over, thrown, dropped at least 2 feet onto concrete or crushed under other packages. There's an entire area of the building dedicated to recovering broken packages and sending them back.
It may not be the company who shipped the go-kart but the actual shipping company themselves who shipped the go-kart that totaled the frame. Im like John, that would piss me off also. There is no reason for this. This is a prime example people, dont fault the company that shipped it, instead fault the company SHIPPING it.
Still another fantastic build, on a great channel with awesome people!!! Also, 10 out of 10 with Ike in the chef hat, i was NOT expecting that but took me by surprise. I LOVE when your videos do that.
NAAA IT EVEN LOOKS CHEAPLY MADE
the company that ships the item needs to make sure the item is properly packaged so damage doesnt happen in shipping. we all know shipping can be rough, no excuse for a company not to package their product accordingly. yea would be nice if shipping companies were more gentle, but its never gonna change. 100% on the company that shipped it
It would be kinda cool to see you port and polish the weed eater engine & run it on race gas, really get that thing sounding like a pissed of bee colony
"Im furious" 😂😂😂 I'm not convinced.. 😂
honestly
for the supposed 1000$ price tag
yeah id be pissed too lol
They were genuinely salty to see it come in such rough shape. The engine swap brightened their days😂
That is going to be a lot of fun at the get togethers and at the Go-pro events and the drag races....-John
44:49 I don't about y'all, but that's definitely something I wanna see!
For sure!
14:30 “Honey, I think the neighbors are chasing eachother around the woods with a chainsaw… should we check on them?”
Really enjoyed seeing this episode , The size and suspension coupled with the go power sports items make this a highly desirable package . I'd love to see strengthening in needed places , A steering wheel !! , Foot control's , .. And a set of wide knobbily wheels and tires ... Strong bushes of coarse ... The steering wheel and foot controls would help with Ike's comfort issues and wider rims and tires with added strength and maybe a slightly modified exhaust system for " Ground clearance " 😂 🤣 LoL this little beauty would be alot more desirable than it already is !!!! .. lighting always comes to mind for me also when watching every build on Cars and Cameras ... . Thank you John and Isaac for your time and effort to provide us with this exciting Content !!! LOVE IT ❤ !!!!
13:46 the mosquito in my room at 2am
18:15 The two male connectors has me dying. 😂😂😂😂😂
That was one of the most entertaining vids I've seen!! Thanks John and Isaac!! Well done!!
Holy Cow, at 74 years of age, I'd LOVE to ride that thing!
John had me rolling when I heard him go weeeeeeee!!!! 😂
Jeez, man. Carries the wheels over the finish line, that chassis is screaming for mercy.
Hey C&C, Keep up the cool builds, it wouldn't be the same wouthout you guys around. Hope you all have a great year.
🇦🇺🤟🥳
40:05 Holy cow, That’s got me lmao 😂🤣 That’s hilarious 😂
That chassis is just begging for mercy LOL
So much torque, the chassis twisted coming off the line
You guys should look into thr wicsonsin v4 and inline/paralell 2 lineup, and put one of those in like a lawnmower or something. I'm doing so myself, but I want it to be able to get out to more people than if I were to video😅 love you guys, you inspired me to do what I love and I've found my favorite thing, best wishes
Wisconsin engines are pretty neat I have one on an antique welder.
2 stroke scooter build please. Rough house R50 preferably, it’s a great off road 2Stroke scooter and plenty of after market parts available, people would love it!
Yess yess this needs to happen or a yamaha zuma
I've done it before on a buddy 50.. I was able to cruise at about 60 and topped out at 71.. now I got a rattler 50 light mods stock cylinder doin 47-50mph gps.. and a Rattler 110
You two are certifiable! Ike hit the throttle and it stood up like it was trying to throw him off! WOW!
For $1,000 that thing is a total piece of garbage. Busted out of the box?!?!!!??
Anything shipped from china that’s heavy, welded, or large will be dropped in shipment. I bet you can’t find these stateside without the same damage.
You should see how much go power sports bolt together go kart cost😂
I dub this new cart: "The Giggle Machine"
Yes! The Giggler.
Oh my goddd that thing is wicked...the wheelie off the line is so funny I almost fell off my chair laughin I love it put a wider set of tires and grip tires all the way around and reinforce the frame and then you got yourself a midsize racer right there I wanna ride that so bad I love the short frame and lotta power got to figure out how keep the front end on the ground hasaa😂
Congratulations on the subscribers ya'll!
Love what you guys are doing but need to give you some advice mix some 10w30 with water and lube your cutter on the mill when your cutting aluminum your cutter won't plug have fun.
That initial burnout with the new engine put a smile on my face 😁
Coming around that finish on the back wheels looked awesome!
Thanks guys, this video was hilarious and much needed. Thumbs up from a very smoky southern california.
Another fun video Guys 👍. You had this Old Man from Washington NC laughing. John spent time with you Dad yesterday. He really lights up talking about being with y'all 💕. Love You Guys. 🛵🧔💝💝💝
You guys are CRAZY!!!! One of my favorite episodes next to the military engines yall use.
I saw this sitting on the side in the last video I was hoping to see a video of it 😂😂love to see it
So.... what this really is, is an opportunity to build your own, done properly! Like mounting the engine to the chassis and running a chain forward to the trailing arm pivot and then back, kind of a mod to how the wheelbarrow works.
A1 implementation of your sponsorship. The acting was actually alright 😂
I think...
That think is bending all over the place. I actually think that you should do two sets of work -
1, stiffen up that chassis. Strengthen the engine mounting. Strengthen the front/front axal.
Test/run/fun/
2. Now lengthen the chassis and put things like bigger wheels.
My one thing is that its rapid now partially at its current weight. The more things you do, the more weight loading up will slow it down.
That thing is a blast!
Line up a dirt bike seating setup behind that handlebar. Minor barrier set up from the chain and shocks. It'll be like a kneeling formula 1 cross cart.
And yes wide. the rear end for sure. But an upright setup from a small dirt bike like one of your little ones. Will sit perfectly almost. You'd probably be sitting more centered and forward
That was GREAT, torqing through the corners and the constant wheelies, awesome and a little dangerous.
Every time I watch your videos I think of Uncle Eddie on national lampoons Christmas vacation played by the part of Ike
I really like watching this one and if you do revisit this thing, fixing the 4link is a must. The back tires are trying to drive under the chassis not push it forward. That means the 4link angels are way too high and are pushing the CG way above the chassis.
I love it when John said " what a bad idea"😅
Outstanding and awesome content as always.Thanks for sharing and taking us along.
You should 100% do those other upgrades you mentioned at the end of the video. I was already thinking about the tires but yeah a long travel setup and extending the frame along with the tires is going to make a huge improvement
Build a stand-up scooter for the 2-stroke.
I’ve been waiting for someone to do this to one of these forever. Awesome video. You guys are the best. Best small engine minibike go kart channel around.
Hey guys! Super cool projects you do, I wish I could do the same.
The engine change made it insane fast.
You guys need a set of walkie talkies, love the videos btw. Keep building cool stuff !!!
Yall should start carrying a super blast horn on you just in case something goes wrong.
Love the hand truck cart 😂
31:02
The giggle from John! 🤣
Living the 3 wheel motion life, go-cart style.
You guys need to start using radios, that way whenever John wrecks or breaks down, poor Ike doesn't get too worried and chases off after him.
I'd be so upset if I got something that broken upon delivery. It's a good thing you guys have the tools and knowledge to work with it. I hope you kicked the company in the company jewels.
You guys are always entertaining to watch thanks for The good times🤗
I literally laughed out loud when Ike came across the finish line on 3 wheels! Too much fun!😂
It's like u guys read my mind I was jus looking at these karts thinking how cool it would b to see it with some power
Now they Need to add the flex with stability if possible. Maybe alittle more power
All I know is I want more content with that little machine. It is WILD, definitely a top 5 favorite for me
This is good old fashioned sketchy Cars and Cameras that hooked me in the beginning. So fun.
39:42 He had 1 wheel on the ground at the finish, insane!
Lol the gearing is perfect so this be a good time to take gearing notes guys so that future builds will get on like this lil race horse ..posi track be the game changer tho.. the handle bars r so cool
I laughed and giggled the whole video. Leave it small and wild, no extensions.
I feel you on the jacket over the sit. Every time I open my screen door, some how the handle gets caught in my belt loops.
muchachossss son unos geniuuuuuuuuuuuussssssssssssssssss!!!!!
What a sick little "kart"!👌 That looks like such a blast!
That looked awesome
That was pretty cool. Keep going with this one. Long travel sounds great.
Ike dragging muff @ 45:57
When the 2x speed kicks in around 13:45 , it sounds like the beginning of mosquito season lol
This thing is EPIC!! Nice job boys!!
great viewing as usual guys. i think you need to copy that thing but make it 20 percent larger and re enginer the rear engine mount
I'd love to see you guys replicate the design but just make it bigger and more heavy duty. It's a beasty looking design. Great video as usual 😎
The KRAZY KART👍
Put a skid plate on the back and make it into a wheelie machine! It's almost there already. That was a lot of fun to watch.
Jon giggling like a school girl was so funny! Very entertaining episode fellas! Definitely “fix” this thing and bring it back!
West nc here. Electric Opel Cadet😊hey you got a mill, good for you guy’s
The bump steer on that thing is wild!
Lol. Madness. You guys should get some radios!!
Hell yeah! Build it up more! So you can take it off some sweet jumps!
This is the kind of build that I love. Scary and ready to cross the line into terror!
Dude that little thing is BAD ASS👌👍💯
This is exactly what I been wanting to do. Oh yes.
Modify and lengthen the rear end, centre the motor and reinforce the frame, put a heavier axle in an put some bigger wider tires maybe some heavier shocks, bushings and struts...... and maybe a roll bar, harness and bigger brakes
You following in the truck makes it look like a scene from Mario cart lol
That thing hauls butt!
Definitely think about building your own full suspension looks like so much fun.
A lot of that broken/bent stuff was well protected. I think they just sent you a return that had been abused around the warehouse for s few years.
Need wheelie bar and build out the front (only) for wider stance/stability Then incorporate a dual torsion bar into the rear end.
I started laughing out loud when John took it for the first rip with the new engine, ha ha ha awesome, what a weapon. PLEASE alter it to make it better, not so much safer, just better and faster.
Yeah the long travel suspension idea sounds like a great idea
My cheeks hurt from laughing during the hot laps!!! Great work yet again!!!
Fun video! 🎉 Reinforce the frame , before too much more.
100% a wild ride. Made the best episode in a while guys! 😂
8:39 do that thing sounds like my echo weed wacker 😂
yea i think this thing need a bit longer and wider, also the engine mount is hilarious haha
That thing is awesome! I'm thinking the motor moving around is possibly the bushings flexing?
Got them snow toys out and ready 💥I see a million views video 💯🫵make us proud guys