So FAST & So Cheap!

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 237

  • @TomleyRC
    @TomleyRC  10 месяцев назад +11

    Win 1 of 5 RC Cars: raffall.com/352650/enter-raffle-to-win-an-awesome-rc-car-hosted-by-phil-harrison
    More info on the Smyter Turbo: www.hpiracing.com/en/part/540230

    • @theaamirkhan0076
      @theaamirkhan0076 10 месяцев назад

      Fabb 👌

    • @nick76rc
      @nick76rc 10 месяцев назад

      Hi Phil, are you planning to make a review/unboxing of the new Rlaarlo Omni-Terminator? ;-)

  • @insectking7050
    @insectking7050 10 месяцев назад +58

    I love to see you still reviewing cheaper RCs, even though your channel has gotten so much bigger. It's what sets you apart from the "other" rc channels. Cheers from an insomniac from WV.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +14

      The video is something for less than a single servo cost me on the last video lol

    • @kevincain6843
      @kevincain6843 10 месяцев назад

      HBX is good platform in this price range. I do not have a problem with it for HPI. I like the center mounted motor ( left to right). It may raise center of gravity but not a crawler so.

  • @coreynelson6731
    @coreynelson6731 10 месяцев назад +12

    Tomley! I have the same car, HBX 903A. Sick! If you run a different wheel/tire combo, she jumps way better. Also, the darn lights fall out too. But, i have emersed my entire car, and can, spray off all the electronics in water with zero issues. All metal 2 diff set with pinion and drive gears, less than 25$ online. Cheap and fun. 3s capable, but does not like full trigger. Thanks from USA.

    • @mikev221
      @mikev221 10 месяцев назад +1

      They basically did the right thing to this one to make it better by fitting a bigger esc to it, I did the same with my pickup truck version of that platform (same as 903a but with really small arms) when I found out it would cut out on full power with a 3s. I feel like I was there before hpi Lol 🤓😋 It's worth it!

  • @grrfy
    @grrfy 10 месяцев назад +13

    wow a company actually using coiled wires for lights, It's like we are finally in the 21st century!

    • @kevincain6843
      @kevincain6843 10 месяцев назад +3

      Yes, major upgrade in my opinion. Makes running much less problematic when removing body for inspection and battery swap.

  • @Luke-en2tk
    @Luke-en2tk 10 месяцев назад +11

    The biggest problem with HPI now is that their latest Maverick and Blackzon stuff are now better than their own HPI stuff 😂

  • @michaelthompson7637
    @michaelthompson7637 10 месяцев назад +4

    That's a cool little truck. I was surprised too when it hit 40. Pretty quick for a truck with the aerodynamics as a brick. Gonna have to add it to the list. I really love and appreciate your videos. It makes it so much easier to choose a car. Thanks for keeping it real. Can't wait to see that 10 wheel drive truck when it's finished.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Thanks mate. Hoping the 10x10 will be driving soon

  • @michaeldorich4485
    @michaeldorich4485 10 месяцев назад +3

    It appears to be a great smaller scale basher. Being able to put everything in a backpack and go to your favorite spot is a big advantage. I think it's a good idea for HPI to get into this market. It looked like a lot of fun. In the U.S. it's listed for about $170. This is a good choice to review.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Yes. Perfect for a space saving Basher 👌

  • @Bullwinkle39
    @Bullwinkle39 10 месяцев назад +2

    It reminds me of my vatos brushless 1/16. I like it. I've learnt with body pins to have them pointing inwards, insert the front from the front and the rear from the rear and they won't go missing as often, they get wedged on rather than go missing

  • @StarsAtNight1
    @StarsAtNight1 10 месяцев назад

    It's a hbx 901/ 903 chassis with a Flyhall fc610 (is Brushed) / hbx 2669a body. Those cars have a center diff and are easier to work on. The main con of all these cars is the really small battery tray. But you can make your own 18650 battery (2s2p) and it will have massive runtime.

  • @BronsonJensen
    @BronsonJensen 10 месяцев назад +14

    You and Kevin are why I got into RCs

  • @doubledome2076
    @doubledome2076 10 месяцев назад +4

    It took some abuse!! Totally agree about the grass landings-once it digs in, all you can do is squint your eyes, grin real hard ( we all make that face ) and pray the damage is minimal!😂 Great video‼️👍👍🦾🦾🤘🤘

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Yes haha.. I’ve broken more things on Grass than concrete

    • @davemorris6747
      @davemorris6747 10 месяцев назад

      Absolutely. Broke the chassis on my rival mt10 when the wheelie bar dug in after a jump and stopped the car dead😂.

    • @davidmellish3295
      @davidmellish3295 10 месяцев назад

      ​@@davemorris6747Bloody Hell, Kevin Talbot, Stempy and Max had a real job trying to break a MT10 , they're practically indestructible and you broke one on grass 😅😅

  • @jeffreygaunt7488
    @jeffreygaunt7488 2 месяца назад +1

    I have this truck ! How can i work out which 3s battery fits ?? Im new to rc

  • @wadevallbona5314
    @wadevallbona5314 10 месяцев назад +1

    I personally am a 1/10 scale guy. I remember when these smaller sizes were odd. It's nice to see that there is cheap and high quality smaller vehicles coming out. Definitely have changed my opinion on scale. These are cheap enough for the whole family to have one. Great video! Thumbs up from Kentucky in the USA!

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Yes, these are great for all the family

  • @OGRCFanatic
    @OGRCFanatic 10 месяцев назад

    I recently grabbed a blackzon too. I Grabbed the 1/16 scale Slyder turbo in baby blue. I’ve never usually been one to take chances on the off brand cars. But when I saw the turbo slyder it just looked so cool. No regrets so far it’s a fun, fast little car. Great video, Phil.

  • @madjh8
    @madjh8 10 месяцев назад +2

    Lot of functions in the transmiter like in the Mavericks, I like this ... and if it is from HPI and you can buy in a Shop, you can get spares easy and probably cheap. Good idea. I´m looking for a RC cheap and fast and this could be instead of the Wltoys 14010

  • @ReactionRC
    @ReactionRC 10 месяцев назад +1

    The turbo version is actually 169.99 here in the states so 40 more than Grom. The regular 2s version is 114.99. great little truck tho can't wait to get mine!👍

  • @quipstad
    @quipstad 10 месяцев назад

    The HBX radio system is frustrating when you try using the speed setting. Forward/reverse is adjusted disproportionately. When you turn it all the way down, it's slow forward but still quite quick in reverse. May be worth showing reverse as well when you demonstrate the speed adjustment.

  • @TidyRC
    @TidyRC 10 месяцев назад +2

    That’s a cool rapid little thing plus the cable for the lights is very handy. Don’t have to b so delicate taking the body off.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Yes… although it did break haha

    • @TidyRC
      @TidyRC 10 месяцев назад

      @@TomleyRC damn. 😵‍💫

  • @patmarcus172
    @patmarcus172 10 месяцев назад +1

    Excellent video as ever.
    Great if the gears are really better as my hbx 901a (on which this is based) strips the main driveshaft rear pinion, (where it meets the rear diff) very easily.
    Be even better if blackzon were to license the new, three-diffed hbx2997a which still isn’t available anywhere outside the USA

  • @farmoboy83
    @farmoboy83 10 месяцев назад

    concerning lights, i opted for a body mount on the exact spot of the "real" headlights. made a small hole and glued with hotglue from inside. Also added rear red lights and now i have a basher with same scale looks. Also, on my 1/16 that i use for garage fightz with my little daughter, the lights on the stock bumper position bend and break really easily. This my idea of shell mount is bullet proof so far

  • @therealcletusrc
    @therealcletusrc 10 месяцев назад +2

    Not a bad little basher, you only landed about 1 jump and it survived all of it. Also just my opinion I prefer the bundles on Raffall comps, even tho I haven’t won anything yet. Good stuff sir 👍🏻

  • @norsefalconer
    @norsefalconer 10 месяцев назад +3

    Coiled wire to the body! 🤯
    Why hasn't anyone done this before?!?!?! 🤦‍♂️

  • @KyleKick909
    @KyleKick909 10 месяцев назад

    I have a Hyper Go H16BM and I don't use the 3S battery because it's a bit too squirrely for me. I just installed an 18pc aluminum kit from AliExpress and maybe now that it's heavier I can control it better on 3S.

  • @ryanjohnson3615
    @ryanjohnson3615 10 месяцев назад

    Nice vid! Hey for future reference, a good trick for bending a threaded part back straight is to thread a nut onto it and beat on the nut. We do that with inch and a half threaded anchor bolts and a sledge hammer on steel building foundations.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +2

      Rubber Mallet 👌

  • @jonhcolbran5850
    @jonhcolbran5850 8 месяцев назад

    Thanks for the video! What would be the best budget ESC upgrade you would recommend for this car?

  • @MrGrunter0
    @MrGrunter0 Месяц назад

    Great video. My young son wants one now!
    Could you tell me what the bigger battery way that you put in please. Thanks 👍🏻👍🏻

  • @danieljackson443
    @danieljackson443 10 месяцев назад

    Were those shocks adjustable on the lower arms?

  • @robertgreen578
    @robertgreen578 23 дня назад

    Did the gearbox make any grinding sounds

  • @TheKawasaki500s
    @TheKawasaki500s 10 месяцев назад

    For curiosity open the rear drive and look at the bevel gear its very soft and on 3 s gets eaten in a few pack, this is why im starting to move away from HBX

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      This says it has ‘HD’ gears… the others listed don’t

  • @boduke9428
    @boduke9428 10 месяцев назад

    So is this built by HBX for HPI or vice versa? I get so confused by all the clones. Are parts interchangeable so you can order from the cheapest provider?

  • @jameswisecarver
    @jameswisecarver 10 месяцев назад

    Bezgar uses that chassis too I have a couple with it, I wonder if they use the same gears?

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      This 'Turbo' 3s Version says 'NEW Steel Diff Gears'

  • @RG-pe8nr
    @RG-pe8nr 10 месяцев назад

    How does it compare with the hyper go´s? I mean, hyper go 14xxx for instance, seems more durable and it is still half of the money....

  • @HenkBrandjes
    @HenkBrandjes Месяц назад

    What battery was the 3s?? Can you please send a link 🙏🏻

  • @coltonfarnes8809
    @coltonfarnes8809 Месяц назад

    Where can I get upgraded parts? My son was driving his and broke the rear hub set after it being out of the box for 10 minutes

  • @mikebrown5066
    @mikebrown5066 10 месяцев назад +5

    The only problem I have with Tomley videos is I keep seeing inexpensive RC cars and trucks I want to buy and I have no more space to STORE cars... Curse you, Kevin Tomley!! Now I need a bigger shop space!!

    • @TomleyRC
      @TomleyRC  10 месяцев назад +6

      The World Kevin is banned in my Comments 😅

  • @badeyes83
    @badeyes83 10 месяцев назад

    I like the idea of seperate prizes to multiple people instead of one person the receiving everything. Gives more people that are on a tight budget to get a RC and let them have some fun

  • @646_
    @646_ 5 месяцев назад

    much appreciated video! nice to see a real durability test, thats one of the most importat thing for me since i buy for my son and he manage to break every rc he gets

  • @gavindurfee6542
    @gavindurfee6542 10 месяцев назад

    @TomleyRC
    I live in the US and have been wanting to jump into your raffles, but I can't figure anywhere about if I'm eligible? Do I just add my US card and it automatically converts to pounds?

  • @neilcampbell2
    @neilcampbell2 6 месяцев назад

    Novice rc owner here. I’ve just purchased this truck. Looking to get a spare battery but unsure what I need to get. Can anyone recommend a spare battery that will fit? Do O need to go for the blackzon one or do most lipos fit? Thanks

  • @MarkJohnMorris
    @MarkJohnMorris 10 месяцев назад

    Yes much better idea to have 5 winners rather than winner takes all. Alot more chance for us ❤❤❤
    Awesome review, i was thinking about getting this for my daughter. 2S on low speed will be perfect to get her into the hobby.

  • @ripptorr
    @ripptorr 10 месяцев назад

    Question is- can I upgrade my base smyter using parts from the smyter turbo?

  • @roccolandolfi1978
    @roccolandolfi1978 4 месяца назад

    Love your vids Il looking for a longer lasting 2s battery do you have any advice what brand battery will fit inside the try thanks from Australia

  • @gerardsmith-go8ro
    @gerardsmith-go8ro 10 месяцев назад

    Still the best,quick question if okay I have the mjx hyper thing is it’s brushed could you please advise me on a brushless motor upgrade please,and anything else I need thanks also how do I join yr giveaways as well,

  • @crisdus
    @crisdus 7 месяцев назад

    Any idea what to do if the red light on the remote keeps blinking and the blue led on the esc keeps blinking? My son is heartbroken, he’s only used it 5 times. And help is welcome! 🙏🏽

    • @krzysztofswiader2219
      @krzysztofswiader2219 5 месяцев назад

      my son rode on 3 batteries and had similar symptoms. I thought it burned the ESC, but after replacing it, it burned out after 5 minutes. the engine short-circuited and also burned the ESC. You have to be careful because there is no protection and poor cooling.

  • @boduke9428
    @boduke9428 10 месяцев назад

    My only issue with smaller scale bashers is how difficult it is to actually land jumps. They just don't have enough suspension travel to keep from bouncing. My 8s exb Outcast can land and settle from all kinds of wonky positions. The long shocks and huge tires along with 30 plus pounds don't bounce. Even tenth scale doesn't land as smooth. Granted, the smaller stuff is less violent when it gets it wrong.

  • @ollieissingle
    @ollieissingle 7 месяцев назад

    Where did u get the 3s lipo from

  • @seanwilson9117
    @seanwilson9117 10 месяцев назад

    Got my kid the HBX version which appears to be more or less identical aside from the body, the good news in that is that we now have Blackzon/HPI supplying parts as well!

  • @richchase1381
    @richchase1381 9 месяцев назад

    What do u rekon mate this or the hpi mavrick 2flux ??

  • @giannetto1000
    @giannetto1000 9 месяцев назад

    For the same price,this or the Mjx 14210?

  • @CuddlePool59
    @CuddlePool59 10 месяцев назад +1

    Bro putts in so much effort he deserves a sub

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Cheers dude

  • @khainugent1353
    @khainugent1353 9 месяцев назад

    What 3s battery are you using?

  • @Cobalt-Jester
    @Cobalt-Jester 10 месяцев назад

    I only just dfound your channel a couple of days ago. I've been ill with this bloody flu going about so I've been on my couch watching everyone of your vieos...
    In one of your early videos you picked up a box of TT-01 parts off ebay...
    I'm pretty sure they were mine.
    They looked like mine. A few years ago I wondered if I could take a bog standard car and get it to go over 100MPH with readily available upgrades. By the time I'd finished with the TT-01 there was very little of it that was standard so I sold all the parts on ebay along with various parts from my sons RC cars and his TT-01... What you made out of the box of parts has a striking resemblance to what my son's looked like. Including the pink and blue alloy upgrades and even the coloured suspension springs and stuff. There was a lot of other parts in your box I didn't recognise. I'm wondering if when I sold it the buyer took what was needed and then passed on the rest with some of his old stuff. But that TT-01 chassis that you made was defo mine/my sons. A shame you didn't get the body shell as it was a GT40 in 2-tone pearl paint. It changed from red to blue in different light and looked amazing.

  • @MaxGillett-ty7sy
    @MaxGillett-ty7sy 7 месяцев назад

    What battery did you put in it?

  • @Slikx666
    @Slikx666 10 месяцев назад

    I'm impressed. And bonus points for the lead for the lights.
    Would I get one? Yes. I just don't have any room.

  • @MarkJackson-e1k
    @MarkJackson-e1k 10 месяцев назад

    Hi Phil, looks a decent truck for the money. It seems like your paying for the Arama name with the grom. I think your right about the 2s being better for it. Looked a handful on 3s. Great review as always. 😊

  • @Deathbysnusnu125
    @Deathbysnusnu125 10 месяцев назад +1

    there is a smaller version of this in hobbie shops here. Probably the size of the grom or however you spell it. It's called the slyder. got one for my son. Fun little basher.

  • @adrianpilbeam7403
    @adrianpilbeam7403 10 месяцев назад

    Thats a solid truck mate especially for someone new or young. Performance against price is pretty damn good. Nice review Phil.

  • @SRG-HITMAN-11
    @SRG-HITMAN-11 8 месяцев назад

    What local hobby shops i assume you mean online as none hardly in essex

  • @sheiladavis2304
    @sheiladavis2304 10 месяцев назад +1

    Another good review but I was hoping for more super apocalypse truck with the heavy artillery. That thing is insane. I've been thinking about it being done for the last couple of days. God if that was real, using a diesel train engine as the body and power plant. I was thinking about something so big rocking from firing the artillery at incoming hoards of zombies!😅😂 too cool.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Haha.. getting back to work on that tomorrow, hoping to get a video out Friday

    • @grrfy
      @grrfy 10 месяцев назад

      It is a real thing apart from full size is actually a 12x12 for when 10x10 just won't cut it. A 150.6-liter diesel V12 gave it the go.a few bits on the net about it cant post a link but 12x12 landtrain should find it.Didn't have thast gun though.😁

  • @richardsawyer5428
    @richardsawyer5428 8 месяцев назад

    You're testing these cars like a hooligan. This is great because I want to see what's the worst that could happen before I buy one. Cheers.

  • @ΕυαγγελοςΦιωτοδημητρακης

    How long does the battery last

  • @youcaillou
    @youcaillou 6 месяцев назад

    Thanks for this review!
    As a complete noob, I don’t understand what you mean when you talk about 2S and 3S 🙈

  • @ollyp5732
    @ollyp5732 10 месяцев назад +1

    how many brands just rebuilding the HBX901a

  • @geoffdbirds
    @geoffdbirds 10 месяцев назад

    I gave one of those to my grandson for Christmas and he loves the hell out of it
    It is fast enough for him and that's all that matters

  • @swindonrctruckersmedia
    @swindonrctruckersmedia 10 месяцев назад

    Impressed on the 3s that's quick for a small car.

  • @PhilipCockram
    @PhilipCockram 10 месяцев назад +1

    Good review , nice truck . Glad to see shops carry these . Hope they have the parts for them too . I always recommend people try to shop local for RCs.
    In the past , I got some good deals and vehicles from Bang G...But those days are long gone here in Canada , The budget prices no longer exist and they sometimes want more for shipping than the product costs now . Dealing with them over a quality issue is very painful experience as well .

  • @roblowrie1969
    @roblowrie1969 10 месяцев назад

    Wow!! That's a little ripper!! 👍🏻

  • @Patrick-hi4ho
    @Patrick-hi4ho 10 месяцев назад +1

    WHERE CAN 1 BUY ONE. I LIVE IN London NW1

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Modelsport… Wheelspin Models… SC Models.

  • @SharkysGarageRCandMore
    @SharkysGarageRCandMore 10 месяцев назад

    What a great bit of kit, certainly sets a good benchmark for the mini basher market

  • @owen8538
    @owen8538 10 месяцев назад

    Has it got a centre diff

  • @TheSphongleface
    @TheSphongleface 10 месяцев назад +1

    The problem with HPI Racing is that they last forever
    Except for that ONE vital part that always breaks
    Fixing it becomes a hassle so the cars are just left in a pile for years
    My pile cost me 25.000$ and I could not care less

  • @ChamnapleysakNan
    @ChamnapleysakNan 9 месяцев назад

    I"m living in Cambodia, how can I get one from UK?

  • @MtOlympusRC
    @MtOlympusRC 10 месяцев назад

    @TomleyRC I have the exact same car that identifies as a Bezgar hm124. Exact chassis and everything. (Except I don’t think it runs on 3s I’ve never tried.) sweet little 1/12 basher loads of fun!!!

  • @chrisvda7277
    @chrisvda7277 10 месяцев назад +1

    Love to see how the Traxxas Rally VXL compares to the HPI WR8 and Cen Puma. Maybe a new Rally shootout.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      No prediction yet on when the VXL will be on stock 😫

    • @chrisvda7277
      @chrisvda7277 10 месяцев назад

      @TomleyRC Traxxas loves you so they will send you 1 I'm sure of it.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Haha

  • @matthewbeeson5612
    @matthewbeeson5612 10 месяцев назад

    Hi Phil, great video thanks. This car looks like it might suit my next project, to build a Tamiya Hotshot that can survive jumps! If you could share the approx wheelbase and track that would be really helpful. Cheers! 😀

  • @rufusyoungblood9274
    @rufusyoungblood9274 10 месяцев назад

    Where can I buy one?

  • @Guitar387
    @Guitar387 10 месяцев назад

    I can’t find anything formation saying what size motor it has in it. Does anyone know.

  • @acche-rc
    @acche-rc 10 месяцев назад

    This seems lighter but faster than the 2995A?

  • @maxpowers7606
    @maxpowers7606 9 месяцев назад

    This or the hbx 16889a? :)

  • @garethsmith5535
    @garethsmith5535 10 месяцев назад

    Can you also review Arrma stuff?

  • @MCsCreations
    @MCsCreations 10 месяцев назад

    Pretty nice looking truck, Phil! 😃
    Awesome bashing and review!
    Stay safe there with your family! 🖖😊

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Yeah, really good 👌

  • @RoostedFilms
    @RoostedFilms 10 месяцев назад

    Looks like a pretty decent little truck. Took a proper bashing.
    Cheers mate

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Yes, was fun

  • @abadakoor7018
    @abadakoor7018 10 месяцев назад

    Hey ! Can I know the name of your gps tracker for the speed ? Great video btw and thanks in advance !

  • @bella0167
    @bella0167 7 месяцев назад

    Not a bad little truck.👍

  • @SnoMoJoe1
    @SnoMoJoe1 10 месяцев назад

    This is a great basher. Especially considering it comes from a quality manufacturer and at such a good price. I have to say, I watch your videos from northwest Montana, in the States, and I really enjoy your channel.

  • @aliyalcin19835
    @aliyalcin19835 10 месяцев назад

    Hbx 2996a is the same but only can 2s drive

  • @FarmerFpv
    @FarmerFpv 10 месяцев назад

    Does it have a slipper clutch? It sounds like it does? Fast little sucker.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Errr… good question 😅

  • @RenePolster
    @RenePolster 10 месяцев назад

    i have the 1 / 14 BlackZon Slyder and its a funny little Machine. All i will change is the Suspensions because its to bumpee with the Stock ones....

  • @RedLionRC
    @RedLionRC 10 месяцев назад

    Looks like a haiboxing or HBX model ☝🏼🧐

  • @timpone896
    @timpone896 10 месяцев назад

    I have the Hbx version of this truck an it's a great lil basher really well balanced with the motor where it's placed an positioned 😎

  • @gingerdude94
    @gingerdude94 10 месяцев назад

    It's that a public outdoor track?

  • @dosetti
    @dosetti 10 месяцев назад

    Nice truck. Hopefully 3s was not the cut off issue you had, if it says 3s it should take it.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      Yes, although the grass was quite long and wet

  • @mehimrc1314
    @mehimrc1314 10 месяцев назад

    The statement about grass v concrete will have feather flying 😂 I agree abit of slip and slide over the grip of grass can save the day 👍

  • @Pablo668
    @Pablo668 10 месяцев назад

    Good review, nice little truck, tough!

  • @CommanderGoggle
    @CommanderGoggle 10 месяцев назад

    Was that a young Tam from Still Game?

  • @julianorozco761
    @julianorozco761 10 месяцев назад

    Muy buenos dias Mr Tomley este pequeñin es muy rapido y nos es muy costoso , muchas gracias por compartir , feliz dia

  • @keithvanderyajt8727
    @keithvanderyajt8727 10 месяцев назад

    I have the HBX version of that. It's a beast. Another great review.

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Cheers dude

  • @FeralRC
    @FeralRC 10 месяцев назад

    That's HBX 903a chassis through and through. Hopefully that has upgraded gears over the HBX because ours would destroy the gears in no time.

    • @TomleyRC
      @TomleyRC  10 месяцев назад +1

      It does say ‘HD Gears’ where the others don’t, so hopefully

    • @FeralRC
      @FeralRC 10 месяцев назад

      @@TomleyRC I definitely take words like that with a grain of salt but if there are gears available that aren't soft powdered metal then I will certainly buy them!

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      This is what it says...
      NEW Steel spur gear (brushed version is aluminum)
      NEW Steel differential gears (brushed version uses aluminum)

  • @danieljackson443
    @danieljackson443 10 месяцев назад

    Just noticed Tye from Cleetus McFarlands channel was wearing one of your hoodies in there last video

    • @TomleyRC
      @TomleyRC  10 месяцев назад

      Yeah, haha.. Tye's a good dude

  • @scaleworksRC
    @scaleworksRC 10 месяцев назад

    Pretty cool little ripper! I still have my eye on that Jumpshot Flux. HPI is really impressive for the money and I didn't know about the 3 tier thing you explained. Nice quick fix on that axle too Thanks bro!