Hi. Thanks for the 3d printing files. I have printed foot pad triangle which is very nice design but I think we need to have to fourth food especially when we put battery on drone.
Hello Troncat, recently I saw your real estate build using PAVO25 about 2 years ago. Can I still use that build on a PAVO25 V2 frame or is there a better build that you can suggest? Thanks
Nice flying brother!! Let me ask a question, I have an avata2 and I was thinking of changing to another one and I was having some doubts about changing to a cinewhoop or a freestyle (I want both in the future, but the one to start) and I was thinking about the Flywoo 85 O3 Lite because I saw a lot of reviews about it and people say really good about it. Do you think that this one would be a good option? I already have an ELRS controller, but I will need to wait the fix from DJI to connect Goggles 3 with the Air Unit. Keep going with the good videos. o/
Nobody asked me but Speedybee Bee 25 and Pavo 20 are better options according to some users. I have them and I like them all but I prefer the bee25, smoother , no jello at all and flies amazing
Hi. Been out of the fpv game for years now but used to race them back when it was still naze32 and betaflight was still actually in beta hehe. Been wanting to go back since it's everything is finally now in hd and I'm looking for something like this (similar to avata2 size) so it can stand some wind but still be small enough. Thinking about some mild long range (3 miles-5 miles tops) to surf some mountain ridges when I'm out on my dirtbike. Do you recommend tbs or elrs? Also a nice compact goggle and radio recommendation as well? Thanks heaps
Hi I wanted some advice from you, I want to create a 2.5 inch cinewhoop. I already have a cinelog 25 with 1404 4500kv motors, my intention was to build a drone that could suffer less from the wind in outdoor flights but that was very maneuverable indoors. The frame is a baby tank from the Italian Farins Frames, the stack is an AIO F7 from T-motor. I wanted your opinion on the choice of motors. I was thinking of Axisflying 1505 but I was undecided on the kv. I could take the 2350kv that also support the 6s and have the possibility of flying both indoors with the 4s and outdoors with the 6s or take the 3450kv that only go to 4s. What do you think?
I am watching this drone since some days. Since two days, I feel like everyone is making videos about this drone. Thanks youtube. Its OK, I bought it. OK! I bought it!
Nice frame. Is there a better option (ducted/protected frame) for an Analog 2"-2.5" build like this, carrying something like a Thumb/Caddx Peanut/Walnut?
With a GPS module and RID it will be over 250. Not a big deal.. just pointing out. How long does it fly on a 750? Can you put a 1000 4s? How does it feel compared to similar 2" or so FPV drones like the Cinelog or the Pavo20 Pro?
It weighed 244 here with a 720mah and the upgraded aluminum front piece that is probably a few grams heavier than stock. I think you could shave enough off to cram say the Lumineer 9g RID module and still be sub 250. Looking at this myself as a part107 for operation over people at events
That depends on what you are wanting to do. In my opinion, racing is the fastest way to learn. I would recommend practicing racing for a few months and then decide what you want to do. You will have good contact of the drone by then. Get some foldable soccer nets and cut the nets out. Those are cheap and easy gates to fly through
Hey man love ur content I need a mentor for a school project. I need someone who can teach me how to fly and build a 5 inch fpv drone and suggest parts and correct me if I’m going off rail and meet up online or in person twice a month. I would really appreciate your help or consideration. Have a great day:)
nice flying through the trees. i like how you find almost impossible paths, but in the end it works out :)
and the quad is pretty interesting too.
Hi. Thanks for the 3d printing files. I have printed foot pad triangle which is very nice design but I think we need to have to fourth food especially when we put battery on drone.
Hello Troncat, recently I saw your real estate build using PAVO25 about 2 years ago. Can I still use that build on a PAVO25 V2 frame or is there a better build that you can suggest? Thanks
Hey, in several recent videos you've briefly mentioned your main real-estate drone, I'm wondering if you have a video showcasing it?
Is it possible to mount a Walksnail Moonlight instead of the o3?
That is really cool looking. The weight is awesome with all of these features. My Cinebot25 might be getting replaced.
I really like the design, super clean
Sweet presentation.
Nice flying brother!! Let me ask a question, I have an avata2 and I was thinking of changing to another one and I was having some doubts about changing to a cinewhoop or a freestyle (I want both in the future, but the one to start) and I was thinking about the Flywoo 85 O3 Lite because I saw a lot of reviews about it and people say really good about it. Do you think that this one would be a good option? I already have an ELRS controller, but I will need to wait the fix from DJI to connect Goggles 3 with the Air Unit.
Keep going with the good videos. o/
Nobody asked me but Speedybee Bee 25 and Pavo 20 are better options according to some users. I have them and I like them all but I prefer the bee25, smoother , no jello at all and flies amazing
Hi. Been out of the fpv game for years now but used to race them back when it was still naze32 and betaflight was still actually in beta hehe. Been wanting to go back since it's everything is finally now in hd and I'm looking for something like this (similar to avata2 size) so it can stand some wind but still be small enough. Thinking about some mild long range (3 miles-5 miles tops) to surf some mountain ridges when I'm out on my dirtbike. Do you recommend tbs or elrs? Also a nice compact goggle and radio recommendation as well? Thanks heaps
Hi I wanted some advice from you, I want to create a 2.5 inch cinewhoop. I already have a cinelog 25 with 1404 4500kv motors, my intention was to build a drone that could suffer less from the wind in outdoor flights but that was very maneuverable indoors. The frame is a baby tank from the Italian Farins Frames, the stack is an AIO F7 from T-motor. I wanted your opinion on the choice of motors. I was thinking of Axisflying 1505 but I was undecided on the kv. I could take the 2350kv that also support the 6s and have the possibility of flying both indoors with the 4s and outdoors with the 6s or take the 3450kv that only go to 4s. What do you think?
I am watching this drone since some days. Since two days, I feel like everyone is making videos about this drone. Thanks youtube. Its OK, I bought it. OK! I bought it!
Cool my First Build ist ready I Must cofigurate it tomorow
Nice frame.
Is there a better option (ducted/protected frame) for an Analog 2"-2.5" build like this, carrying something like a Thumb/Caddx Peanut/Walnut?
Im guessing we would have to add rid?
Great video Thank you apriciate it💪💪💪💪💪
I wonder if caddx moonlight fit in there
If speedybee made other drones to accept the camera housing or a 3d printed adapter that would accept it, i would convert all my drones to that
Which Cinewhoop would you reccomend for real estate? I have a cinelog 25 but just not liking it.
Build video please!!!!!!!!!!!!!!!
You can buy these as is from speedy bee, this being one
They come pretty much built.
How is it compared to your QAV build?
Nowadays do most people have 3d printers? Curious, I Don't! Ha ha Really like this drone! Speedy Bee really do have great Prices!
How’s it compare to pavo20 pro?
I wonder if a moonlight will fit
With a GPS module and RID it will be over 250. Not a big deal.. just pointing out. How long does it fly on a 750? Can you put a 1000 4s? How does it feel compared to similar 2" or so FPV drones like the Cinelog or the Pavo20 Pro?
Don't need rid if it's under 250 grams that's the whole point🤦♂️
You do if you’re flying part 107, which you’ll be doing if you’re flying outside for money, which is half of why someone would buy this.
It weighed 244 here with a 720mah and the upgraded aluminum front piece that is probably a few grams heavier than stock. I think you could shave enough off to cram say the Lumineer 9g RID module and still be sub 250. Looking at this myself as a part107 for operation over people at events
with tattu r 4s 650mah i would be under 250g?
How do you think this compares to the pavo series?
this vs pavo25 which better
Possible to put walksnail?
Should I build 3.5inch drone or 5inch fpv drone as a first fpv drone
That depends on what you are wanting to do. In my opinion, racing is the fastest way to learn. I would recommend practicing racing for a few months and then decide what you want to do. You will have good contact of the drone by then. Get some foldable soccer nets and cut the nets out. Those are cheap and easy gates to fly through
Could you add BS RID and still keep it under 249g?
What do you do if that drone gets stuck in the trees?
cry. then come back later with another drone to try and rescue it.
@@TRONCATFPV 😂
No naked gopro mounting i'm guessing.
awesome Video!
My 5years wish to build a fpv drone but I can't build 😢😢😢
You're showing a drone with LEDs and no footage of it at night???
What did I miss
No,, because air unit at night is blind mode, and leak of its cob light
Could carry a gopro with the necessary 3d printed parts
Full gopro?
not so sure about a full sized gopro, deff a naked one though 👍
@@TRONCATFPV would this be a better quad than the Cinelog25 v2?
Hello 😊
Hey man love ur content I need a mentor for a school project. I need someone who can teach me how to fly and build a 5 inch fpv drone and suggest parts and correct me if I’m going off rail and meet up online or in person twice a month. I would really appreciate your help or consideration.
Have a great day:)
Only 6 minutes of flight time is crazy
That’s average for fpv drones and that’s actually pretty good for such a small drone