Cant thank you enough mate. I'm in the middle of northern Europe and the nearest phone service is 45 km away. That means I need to drive there and back and return to collect in a couple of days so 180km all in. I managed to sort it thanks to your vid, so in off ice fishing tomorrow as planned, your a star.
Thanks this was really helpful! Though, the process has also renewed my hate for Apple. Apparently my power connector was 2mm to far forward so I had to pull half the thing apart a second time. I swear my Note 9 used about half as many of the *same* philips screw. Not to mention less glue and more cooperative connectors.
Those 2 cables u said that are tricky I pushed to hard n snapped the top of what of them do I have to buy a new board or is there a trick to fix it bc my phone don't light up at all
What if touch ID button stopps working / vibrating after this replacement.... Tried rebooting, updating software, and taking connectors of screen on and off but no luck...
What the required voltage on the battery connector on the board? The iPhone i have only shows 3.7 volts.... which apparently is not enough to charge the battery
Thank you, thank you!! Emphasis on keeping tiny, micro screws organized lol each are truly different. Handy shortened (many steps saved) and genius trick for placement! 😊😅 all went well w ifixit kit. Thanks so much for your tech knowledge 🎉 and sharing 😄
Any tips for where to get an affordable set of screwdrivers? I mostly fart around with repairing vintage computers but am looking to branch into phones and stuff.
I just completed my swap! I bought a couple of cheap dead phones off eBay and practiced several times. The videos that show removing the logic board and all the other components at the top of the phone were overwhelming. (I’ve swapped the battery before and that was easy in comparison). Anyway- your “slip it under the logic board” method is pure genius! Thank you!!❤❤
Thanks for a very well explained video , and mentioning the pitfalls ( like screws ) it seems very hard eh ! but you make it look so easy , how long does this take can you tell me If done by mr average guy ? Thanks :)
If you think this is non serviceable it might be you who needs some increased intelligence 😂 I remember doing this back freshman year in high school to make money fixing phones of class mates
luckily the charging port is not built in board otherwise you'll have to disolder it most difficult ever, cause corrotion or dirty port connection is one of the problems
and I just killed my phone. I took the 2 screws out, opened my iphone very slowly like a book, and broke a ribbon connection. The other ribbon connection is fine. I only see one in this one that you used. I have an iphone 7 plus as well.
Cant thank you enough mate. I'm in the middle of northern Europe and the nearest phone service is 45 km away. That means I need to drive there and back and return to collect in a couple of days so 180km all in. I managed to sort it thanks to your vid, so in off ice fishing tomorrow as planned, your a star.
Enjoy your ice fishing!
@@iDoctorUK cheers again .
FINALLY!!! A video that shows us not only how to take these damn things apart, but more importantly, how to put them back together again! THANK YOU!
I’ve noticed this in lots of other vids so thought it would be important to include
@@iDoctorUKYour thoughts are very much appreciated.
Absolute legend!
Excellent video.
Managed to change my faulty port by following this great guide.
Top stuff.
I am going to tackle this project this weekend. Thank you so much!
Very well explained tutorial! everything went fine after following all instructions! keep going that way :=)
can this be done using another iphones port
I did it for the first time by watching you and it works! I appreciate that👊🏻
Txh bro btw where to buy if one of the cable are broken or ripped of
Great job! Thank you so much.
You're very welcome!
with this video i was able to fix my phone which i had written off. thank you very much..
Best explanation 👌👌👌
Thank you so much❤
it worked 🥳🙏🙏
Thanks this was really helpful!
Though, the process has also renewed my hate for Apple. Apparently my power connector was 2mm to far forward so I had to pull half the thing apart a second time.
I swear my Note 9 used about half as many of the *same* philips screw. Not to mention less glue and more cooperative connectors.
For sure, it is tricky to get it lined up right first time
Those 2 cables u said that are tricky I pushed to hard n snapped the top of what of them do I have to buy a new board or is there a trick to fix it bc my phone don't light up at all
What if touch ID button stopps working / vibrating after this replacement.... Tried rebooting, updating software, and taking connectors of screen on and off but no luck...
What the required voltage on the battery connector on the board? The iPhone i have only shows 3.7 volts.... which apparently is not enough to charge the battery
If the iPhone 7 heats so much and you replace the battery but still continues to heat, will changing the port and the battery change things?
Thank you, thank you!! Emphasis on keeping tiny, micro screws organized lol each are truly different. Handy shortened (many steps saved) and genius trick for placement! 😊😅 all went well w ifixit kit. Thanks so much for your tech knowledge 🎉 and sharing 😄
You’re very welcome
N is there a trick to use these magnetic tools bc at times its a pain in the ass especially with the ground piece
thank you for that instruction. I tried other Videos but this one nailed it ... excellent : )
Ottimo video mi ha aiutato tantissimo, grazie
Beautifully Explained !
Glad you liked it
The wire i snapped can i use one from a 6 iphone
Where is the link for the port. I need to buy.
Any tips for where to get an affordable set of screwdrivers? I mostly fart around with repairing vintage computers but am looking to branch into phones and stuff.
An ifixit kit would be ideal for what you described
How do I fix baseband problems on iPhone 7 plus
Thank dude.. I did it perfectly ♥
Was so useful
I put everything back but now it won’t turn on which plug is it for power
same
I just completed my swap! I bought a couple of cheap dead phones off eBay and practiced several times. The videos that show removing the logic board and all the other components at the top of the phone were overwhelming. (I’ve swapped the battery before and that was easy in comparison). Anyway- your “slip it under the logic board” method is pure genius! Thank you!!❤❤
Where did you get the part from the charge port?
Amazon but make sure it right model number comes with kit mb 12 to 14$
what liquid did you used?
Isopropyl alcohol
After replacing I got so many signal issues plz help
Dear bro i am from india i have iphone 7 but charging port is not working can you please fix it
Thanks for a very well explained video , and mentioning the pitfalls ( like screws ) it seems very hard eh ! but you make it look so easy , how long does this take can you tell me If done by mr average guy ? Thanks :)
my loud speaker screw stripped😩 how can i fix this?
You can buy replacement screws.
@@cattycharo7958 update I just didn’t use them and it worked lol
Thanks❤
Example of a non-serviceable product
If you think this is non serviceable it might be you who needs some increased intelligence 😂 I remember doing this back freshman year in high school to make money fixing phones of class mates
thank u😊
luckily the charging port is not built in board otherwise you'll have to disolder it most difficult ever, cause corrotion or dirty port connection is one of the problems
my mic doest work after i follow your tutorial😭
Maybe it is a faulty part?
Jerry Clarkson?
Haha he has given up cars and farming for phone repairs
After doing this my screen doesn’t work..
and I just killed my phone. I took the 2 screws out, opened my iphone very slowly like a book, and broke a ribbon connection. The other ribbon connection is fine. I only see one in this one that you used. I have an iphone 7 plus as well.
There are 3 cables in total that connect from the phone to the back of the screen. It isn’t completely killed though. The screen is replaceable too!
Repeat price sir😢
wow
I hope it helped!
Ok
If you need a helper for work plz contact me. I repair phones too. N im also educated enough to talk in English 😁
❤❤
The🎉🎉🎉🎉🎉🎉 🎉
sorry bor forgive me