Great thx. Getting out the bike after winter it was stuck in parking mode no matter what I tried to push it. I shortcut the 2 wires for now. It is a pity they put all this glue to the button. I guess this is the reason there is a common false contact. Any idea if the button can be found and if we could properly make soldering? I could not find it as a spare anywhere...
Do I need to have it on "ready" before I cut the cables or can it be in parking mode too. In other words: if cut the power will it stay in the setting im in (ready or parking mode)??
Damn, that mirror/handlebar hole has upset me; you see I'm needing to swap the stock handlebars to more narrow ones to fit in the flat when I get mine, but now I have to machine a hole in them... 3:33
@@knightrides6034 here's a RUclips video I found that explains and gives advice on overcoming those locating pins. - ruclips.net/video/ko80LjeI24Y/видео.html
I've just sent Super Soco and a dealership (English Electric Motor Co.) that's focused on electric motorcycles a public message via Twitter about this, hopefully they can offer some clarity... - twitter.com/EbikeJaimes/status/1175822877981122560?s=19
Here's a response from a dealer of these Super Soco's "As far as i am aware they are not for grounding. However, it would be pretty easy just to drill a couple of holes in the new bars to refit the controls without removing the stubs."
These switches will be used by emergency services when you've been in an accident, if you are pinned against a vehicle then then the emergency services need a way to kill the motor mechanism.
hey can I contact u in any way across social media? I have a few problems about my bike specifically with it not being able to turn on and I was wondering if u can give me some advice?
i have a different question... above the park button is a flip switch that says auto and something else... what does it do?? mine has the switch but it has no markings and does nothing HAHAHA
You might've damaged something or pulled on the wires, either way replacing a handle isn't that hard but I can't think of a fault that requires a new handle controls
Thanks a lot! Fixed my Soco TS Lite as you did, don't have any problems with stands
What is a TS lite??
Love it mr! Im gonna try to do it on my bike 🤩
Great thx. Getting out the bike after winter it was stuck in parking mode no matter what I tried to push it. I shortcut the 2 wires for now. It is a pity they put all this glue to the button. I guess this is the reason there is a common false contact. Any idea if the button can be found and if we could properly make soldering? I could not find it as a spare anywhere...
Hey! Bad button can be fixed with electronic spray. Spray it in there and see if it fixes the glitch.
Have you tried out the 1200r? How is it compared to the tc? Top speed, acceleration?
Slightly faster + more range
Thought I had this problem and just realised I hadnt flipped my stand up.
😂
is that also work for ROBBO SPIDER ? i do have some symptoms that its stuck in parkmode (after i leave it standing around turned on for awhile)
that work for most of the cheaper models out there ?
Awwwesome work
I know this is an old vid now, but do you think this would work on a TS1200R?
I do but only one way to find out
@ it did it a week ago, worked fine :)
So do I connect the white and green wires coming fron the bike after butting them?
Yes
How do you turn of the lights on the super soco cux? They are so strong and I don't need them on during the summer. Thanks!
How important is it to reconnect the cables? I’ve only cut them, and it seems to do the job. Maybe I’m risking something else?
I think it's fine, maybe the newer ones is wired differently
Do I need to have it on "ready" before I cut the cables or can it be in parking mode too. In other words: if cut the power will it stay in the setting im in (ready or parking mode)??
Just turn off the bike before doing anything and keep it off until you're done , other than that it shouldn't matter
Damn, that mirror/handlebar hole has upset me; you see I'm needing to swap the stock handlebars to more narrow ones to fit in the flat when I get mine, but now I have to machine a hole in them... 3:33
Well I managed to do it without the hole for a good time (my flat bar isn't stock either)
@@knightrides6034 here's a RUclips video I found that explains and gives advice on overcoming those locating pins. - ruclips.net/video/ko80LjeI24Y/видео.html
I've just sent Super Soco and a dealership (English Electric Motor Co.) that's focused on electric motorcycles a public message via Twitter about this, hopefully they can offer some clarity... - twitter.com/EbikeJaimes/status/1175822877981122560?s=19
Here's a response from a dealer of these Super Soco's "As far as i am aware they are not for grounding. However, it would be pretty easy just to drill a couple of holes in the new bars to refit the controls without removing the stubs."
Where’d you get that sweet bag?
I just bought a normal leather bag and Put it there
Hello there my bike is not turning on from the remote please tell me the solution
check remote battery or use spare remote
My is on 3 gear it run only on 45km what can I fix it
Hello friend I am having problem with my soco it not running and I can't figure out why. It would be great if you can help.
Symptoms?
These switches will be used by emergency services when you've been in an accident, if you are pinned against a vehicle then then the emergency services need a way to kill the motor mechanism.
hey can I contact u in any way across social media? I have a few problems about my bike specifically with it not being able to turn on and I was wondering if u can give me some advice?
My IG account is in the description.
You can also ask me here so everyone benefits from it in the future
i have a different question... above the park button is a flip switch that says auto and something else... what does it do?? mine has the switch but it has no markings and does nothing HAHAHA
@@chaver28 I thought so too at first, but it switches the lights between AUTO and ON
AUTO = turn on by itself at night
ON= always turned on
@@knightrides6034 oooh haha thanks dude means alot
i just sprayed mine with WD40, contact cleaner would do the trick too
It dident work it says 95 blinking in the top right corner and I can't gas
Look up the code ⚠️95 in the manual
I just did this, now i cant drive my Super soco and need to replace the handle
You might've damaged something or pulled on the wires, either way replacing a handle isn't that hard but I can't think of a fault that requires a new handle controls