Hello, I purchased a car with this system installed. I am really happy with it, and keep up the good work. I only have one question. The left speaker works fine with CarPlay, but the right doesn't. AUX is activated in the engineering menu and the Radio works with BOTH speakers. Also, when I do a phone call with the original Mercedes Bluetooth connected, I can hear both speakers. Both speakers have always worked with a AUX cable. Could you please let me know what your advise would be? It's a car from 2008 with a NTG 4.0 system. I have tried to use a different phone, but same result. Same applies to applications, I have used Spotify, RUclips, all have the issue that only one speaker is being used.
Yes, I fixed this; it was the cable that was. the problem, I needed to cut a cable to get this fixed. Ask the seller which cable you should cut@@karim_beats
I went to aliexpress shop and show me some options NTG 4.0 NTG 4.5 NTG 5.0 and NTG 5.0 with Aux my car is 2008 Mercedes Benz C300 which one I should pick ?
Hallo, wir schlagen vor, das Modul auf den Fuß des Beifahrersitzes zu stellen. Wenn es innen platziert wird, ist es wichtig, die Verkabelung vor der Wiederherstellung gut zu organisieren. Freut mich trotzdem zu hören, dass es jetzt funktioniert :-)
sure, you can switch between two system by press steering wheel button. module bring a new system in the screen to work, however do not influence original system works
Guys, I have a similar system and can no longer use my old keyboard from the radio or steering wheel, if I install a carplay would that help me? Please help me! Thanks
Can you listen to radio while using car play? I have ordered it. I have a question regarding the AUX I normally use AUX jack in the glove box to play songs from my telephone. Do i still need to do the first step? Also the compartment where you hide the box is it stable ? Won’t it make noise while driving ?
1.do not support to listen to original radio while using car play. 2. use auxiliary input option in benz media menu, not aux port, no need to connect aux cable 3. you can hide the box under carpet of glove box or behind radio head unit . 4. no noise while driving
@@Kremersino Ok Thanks for you rapid answer. Just one last question does CarPlay fail or exit when passing no signal zones ? Cause I do a lot of traveling in country side where some parts have poor signal. I’m waiting for my order, so far so good, it’s been really quick it’s already shipped!
Ich habe eine ähnliche System, und seitdem ich das eingebaut habe funktioniert die Tastatur am Lenkrad und Radio nicht mehr. Würde mir sowas helfen? Bitte um anwort ich bin verzweifelt. Danke!
Hello I tried to install it on 2008 C350. The screen shuts down when carplay is engaged, after a couple of seconds. Stay on log enough to see carplay on the screen. I uninstalled it and the screen would stay on. Any ideas what is causing this?
Your customer service was able to help me out. Thank you so much. For anybody with a W204, 2008 C350, in my car the switch was set to 1H,2L,3H,4H,5H,6L, or the screen will go black once Carplay engages. This adapter works smooth and with full capabilities.
hi, here is the answers for two questions: 1. do not support to use oem radio together with navi from carplay at the same time. oem system and retrofit system can not works in same time and both of them use different audio channel. carplay use aux /bluetooth as audio 2. yes you can install it on 2011 w212 NTG4.0
Hello, everything works in my W204 2007 (connection with iphone, navi, mirroring) except audio and sound. What can I do to fix it? Also what jf i dont have optic fiber cable?
Добрый день! как переключаться между двумя режимами - оригинальной магнитолой и CarPlay? Каждый раз вынужден выключать авто, вытаскивать ключ, ждать когда электроника полностью выключиться, выключать на телефоне wi-fi и только тогда включать авто - только так оригинал. Если завел авто с включенным wi-fi то сразу включается CarPlay и из него уже не выйти
@@Kremersinoкак переключаться между двумя режимами - оригинальной магнитолой и CarPlay? Каждый раз вынужден выключать авто, вытаскивать ключ, ждать когда электроника полностью выключиться, выключать на телефоне wi-fi и только тогда включать авто - только так оригинал. Если завел авто с включенным wi-fi то сразу включается CarPlay и из него уже не выйти
Just ordered on your ali link. Thank you!
Does it work?
@@M.K.7.7 just got here today, I’ll let u know In the morning of it works boss 🫡
@@M.K.7.7no it does not lol
Hello, I purchased a car with this system installed. I am really happy with it, and keep up the good work. I only have one question.
The left speaker works fine with CarPlay, but the right doesn't. AUX is activated in the engineering menu and the Radio works with BOTH speakers. Also, when I do a phone call with the original Mercedes Bluetooth connected, I can hear both speakers.
Both speakers have always worked with a AUX cable. Could you please let me know what your advise would be? It's a car from 2008 with a NTG 4.0 system.
I have tried to use a different phone, but same result. Same applies to applications, I have used Spotify, RUclips, all have the issue that only one speaker is being used.
Did you fix this
Yes, I fixed this; it was the cable that was. the problem, I needed to cut a cable to get this fixed. Ask the seller which cable you should cut@@karim_beats
Is audio of ntg being drived by aux or fibre optic.
Is there a possibility that allows calls to go through the Mercedes-Benz's built in Bluetooth whilst using the Android Auto?
yes you can use Mercedes bluetooth as audio in android auto, however request mercedes has bleutooth call and bluetooth media audio functions
I went to aliexpress shop and show me some options NTG 4.0 NTG 4.5 NTG 5.0 and NTG 5.0 with Aux my car is 2008 Mercedes Benz C300 which one I should pick ?
2008 model is ntg4.0 system, kindly select ntg4.0 to buy
Wir mussten die Stecker zerschneiden weil für den Quadlock hinter dem Gerät nirgends platz war. Bos funktioniert perfekt.
Hallo, wir schlagen vor, das Modul auf den Fuß des Beifahrersitzes zu stellen. Wenn es innen platziert wird, ist es wichtig, die Verkabelung vor der Wiederherstellung gut zu organisieren. Freut mich trotzdem zu hören, dass es jetzt funktioniert :-)
With the carplay installed can i still access the old system with the module if i wanted to
sure, you can switch between two system by press steering wheel button. module bring a new system in the screen to work, however do not influence original system works
Guys, I have a similar system and can no longer use my old keyboard from the radio or steering wheel, if I install a carplay would that help me? Please help me! Thanks
Hallo,
Hab die Box bestellt aber in meinem Auto gibt es keinen Fiber Optik Kabel
Ich habe diese Stelle komplett frei und weis net was ich machen soll
Can this be added on the small screen version?
5.8'' 7'' 8.4'' compatible
Can you listen to radio while using car play? I have ordered it. I have a question regarding the AUX I normally use AUX jack in the glove box to play songs from my telephone. Do i still need to do the first step? Also the compartment where you hide the box is it stable ? Won’t it make noise while driving ?
1.do not support to listen to original radio while using car play. 2. use auxiliary input option in benz media menu, not aux port, no need to connect aux cable 3. you can hide the box under carpet of glove box or behind radio head unit . 4. no noise while driving
@@Kremersino Ok Thanks for you rapid answer. Just one last question does CarPlay fail or exit when passing no signal zones ? Cause I do a lot of traveling in country side where some parts have poor signal. I’m waiting for my order, so far so good, it’s been really quick it’s already shipped!
Hi what is price i want to buy bit i cant find. And How long to arrive in my country
Cool Danke hat mir Geholfen
Hello, you must turn on Carplay in every start of car or carplay will be turning on automatically every time ? thanks. Nice Job ! 🙂
after installed carplay will turn on automatically once you turn on engine
Ich habe eine ähnliche System, und seitdem ich das eingebaut habe funktioniert die Tastatur am Lenkrad und Radio nicht mehr. Würde mir sowas helfen? Bitte um anwort ich bin verzweifelt. Danke!
hello, different product has different working rules. you need connect supplier to get solution
Hello I tried to install it on 2008 C350. The screen shuts down when carplay is engaged, after a couple of seconds. Stay on log enough to see carplay on the screen. I uninstalled it and the screen would stay on. Any ideas what is causing this?
seems like dip switch issue? kindly share your ID to our team and get help, thanks. sales@kremersino.com
The ID on the adapter?
Your customer service was able to help me out. Thank you so much. For anybody with a W204, 2008 C350, in my car the switch was set to 1H,2L,3H,4H,5H,6L, or the screen will go black once Carplay engages. This adapter works smooth and with full capabilities.
does the screen still close and hide away?
screen works like original.
Hello. Can I use original radio together with navi from carplay at the same time with this box? Is it possible to install this on 2011 W212 NTG 4.0?
hi, here is the answers for two questions: 1. do not support to use oem radio together with navi from carplay at the same time. oem system and retrofit system can not works in same time and both of them use different audio channel. carplay use aux /bluetooth as audio 2. yes you can install it on 2011 w212 NTG4.0
Hello, everything works in my W204 2007 (connection with iphone, navi, mirroring) except audio and sound. What can I do to fix it? Also what jf i dont have optic fiber cable?
hello friend, have you solved issue? it is easy question, please contact our service team to get help. sales@kremersino.com
were you able to resolve this issue?
Any solution for this problem?
Добрый день! как переключаться между двумя режимами - оригинальной магнитолой и CarPlay?
Каждый раз вынужден выключать авто, вытаскивать ключ, ждать когда электроника полностью выключиться, выключать на телефоне wi-fi и только тогда включать авто - только так оригинал.
Если завел авто с включенным wi-fi то сразу включается CarPlay и из него уже не выйти
прывітанне, калі вы купілі сваю прыладу, выкарыстоўвайце кнопку адбою на рулі для пераключэння паміж дзвюма сістэмамі.
Ich bräuchte Hilfe da bei mir nur black screen kommt wenn ich zu carplay wechsle
Bei mir genauso. Schon eine Lösung gefunden ?
When I press the button to initiate the CarPlay it turns on for 1 second then screen goes black - please help!
from description the dip switches in the interface is incorrect. please contact our service team for help, thanks. sales@kremersino.com
What’s happening with the reverse camera when you shift to Reverse? Do you have to turn on the carplay again or it’s automatically?
reverse camera works in oem system /retrofit system automatically when shift to Reverse. and carplay will turn on automatically once turn on engine
Why does my sound work I need help
Doesn’t
@@lifeofyg5602 have you solve the issue? if no sound please go to original system-media menu-select aux option
@@lifeofyg5602 were you able to resolve this issue?
@@yvb_bills9782did u fix
@@Kremersinoкак переключаться между двумя режимами - оригинальной магнитолой и CarPlay? Каждый раз вынужден выключать авто, вытаскивать ключ, ждать когда электроника полностью выключиться, выключать на телефоне wi-fi и только тогда включать авто - только так оригинал. Если завел авто с включенным wi-fi то сразу включается CarPlay и из него уже не выйти
My carplay isn’t connecting same with the android auto pls help
What if you don’t have the flip up screen will it still work? 2010 C Class w204 with NTG4.0
carplay interface works based on the system, not car models. 2010 C Class w204 with NTG4.0 compatible