LS swapping the 2004 Ford Crown Vic Police Interceptor with a Chevy LS 6.0L/4l80e in 8 hrs. Music by The Ruxpins new album Wanderlust: Oceans Coming Home Wanderlust
Good day...Is this crown vic still running...I know you say you guys are in Beaumont right??? Did you create your own wiring harness?? I want to put a 5.3 into my Crown Vic...but I need your help and guidance!!!
I wanna see that Yugo. Engine and tranny length would pretty much make a driveshaft moot, as long as you can fit the heads and headers between the MacPherson towers. Sorry.. Gotta go cackle for a while at the visual.
@BeskiiUgh !! I'm thinking about using a the dirty dingo adapter plates with a set of 97-04 mustang gt motor mounts. I'm 80% sure it's the same engine cradle as a foxbody
Hello. Nice swap. I bet Chevy and Ford fans must be throwing sparks !!!! I saw you reflashed the pcm. Did you purchased the programm or downloaded ? I am still debating on either Chevy or Ford engines for my Volvo swap. I had swapped a Supra 7mgte but the pcm/igniter is caput and oil pump doesn't pump enough pressure. Ok hope to hear from you soon. Dz
@@veightrwd8828 You ever heard of ridiculous builds? They actually do cars like this person wants to do. Crazy builders like us don’t mind it, as long it’s going like we want it to.
@@DtsProjects That is even better, because my family stays in Port Arthur....I would like for you to install a 6.0 in my Crown Vic...I am sure you have perfected the swap by now!!! How is the Vic running now???
@Boosted Swaps no, some people say stick would be close to working but this was no where near. I think its close if you use a 4l60e but we put a 4l80e behind this one
The supreme irony when I saw my first GM LSx V8 many years ago, was that GM rummaged through Ford's 351W tooling scrap heap and, essentially released the 'next gen Windsor' family. Although it appears Ford has a motor, the 2020 Godzilla 7.3L Eight that may be what the Dr ordered to repower the remaining Panthers out there.
Forever Student Armando Bonilla Olivieri of Warren harding High School in Bridgeport Connecticut to bonifacio Ssnchez jimenez in aibonito puerto rico because of 56 maiden lane 06608 and I am a mecanic today and the best and forever and forever .bridgeport Connecticut.
It touches my soul to see more and more LS engines going into fords🥺😄💯👑❤💪🏿
yes, where they belong😂😂😂
What mounts did you use
i know you can use the ls to foxbody mounts and flip them over and modify them
I'm watching this because this is what I'm going to do to my crown vic also
Good for you guys. Hope it worked out. Lotta work if there’s a v8 in there already though is all I’m thinkin.
That's not true cause a 4.6 is shit compared with an LS
Made Ford tough, with Chevy stuff!!
Need a shop like that here !
Yeah but does it run and drive?
Once the PI motor in my 2008 goes I wanna put an 8.1 LT(496ci) in it.
How far off would you think the differences would be between a 6.0 and an 8.1?
same man. ive got 7 cylinders left till the ls lmao.
Good day...Is this crown vic still running...I know you say you guys are in Beaumont right??? Did you create your own wiring harness?? I want to put a 5.3 into my Crown Vic...but I need your help and guidance!!!
Good morning!!! Is this car still rolling?? Have you encountered any issues with it since the swap, and is the wiring harness holding up??
Great video thanks
Hello fellas I would be honored if you could kinda explain how you got the,dash to work with the ls swap to work together as well as the cross member
How much y'all charge me for my 96 grand marquis swap ls
LS swaps work in everything from Yugos to Winnebagos.
I wanna see that Yugo. Engine and tranny length would pretty much make a driveshaft moot, as long as you can fit the heads and headers between the MacPherson towers.
Sorry..
Gotta go cackle for a while at the visual.
What was roughly the labor cost to do this swap?
unless its diy you have to worry about the fuel cost
One case of beer 😎
I'm curious what swap mounts they used. I'm looking into swapping an ls into an 85 grand marquis.
Let me know what kind of motor mounts
I'm in the process of installing a 455 out a Pace Arrow motorhome into an '85 Grand Marquis. Any information would be appreciated. Thank you
@BeskiiUgh !! I'm thinking about using a the dirty dingo adapter plates with a set of 97-04 mustang gt motor mounts. I'm 80% sure it's the same engine cradle as a foxbody
Any info on what engine mounts were used for this project?
Where you guys located??
Since hurricane Harvey where are you from Houston
Hello. Nice swap. I bet Chevy and Ford fans must be throwing sparks !!!! I saw you reflashed the pcm. Did you purchased the programm or downloaded ? I am still debating on either Chevy or Ford engines for my Volvo swap. I had swapped a Supra 7mgte but the pcm/igniter is caput and oil pump doesn't pump enough pressure. Ok hope to hear from you soon. Dz
I'm betting they just shut off the security parameters
@@Gill67 oh ok i see. Good tip thanks
judging by how opaque the headlamp lenses are either you live near the gulf coast or thats where that car was in service
If this helps that estimate I live in Iowa and all of our headlights are like that after a couple of years lol
Can anyone tell me what oil pan they used? I'm not well versed in all the different LS oil pans out there.
I assume a holley 302-3
I have a 01 MGM I would like to have A Ls Swap job doing...
I need mine swapped. How much does it cost
How much to put a v8 Grand Marquis engine in ?
Where are you located?
Ê
How much
Also is there a noticeable power difference between the 2v & ls
Wtf obviously about a 2-400 hp difference
@itried1187 Oh, nice gbu ☺️
Ls swap the world
If I brought u guys a 1999 grand marquis and a hellcat demon engine could u swap the engines?
Save yourself some money and do it yourself
The motor must be stolen. No one with the money would put that engine in a 99.
@@veightrwd8828 not everyone has the crazy in em quite like me lol
@@veightrwd8828 open your mind
@@veightrwd8828 You ever heard of ridiculous builds? They actually do cars like this person wants to do. Crazy builders like us don’t mind it, as long it’s going like we want it to.
Good morning...Where are you guys located at in Texas....Houston???
Beaumont, Texas actually!
@@DtsProjects That is even better, because my family stays in Port Arthur....I would like for you to install a 6.0 in my Crown Vic...I am sure you have perfected the swap by now!!! How is the Vic running now???
@@DtsProjectsdo u guys do lsx swaps
Motor 1
Check engine light? Ford tuff chevy stuff😁
What a nightmare! I'm keeping my 4.6...
Lower end Ls isn't better than 2v 4.6....
@@miamidangia5122 keep telling yourself that lmao.
@@Bad666Moon it the truth
@@miamidangia5122 explain modd boy
Sacrilege!
What is your drive shaft and motor mount?
Just some mount adapter plates for a 4.6L 2v ford to LS. It uses same ford mounts to adapter plate to the LS. Driveshaft is custom with 1350 u joints
@Boosted Swaps no, some people say stick would be close to working but this was no where near. I think its close if you use a 4l60e but we put a 4l80e behind this one
You can tell these guys don’t anything about a ford😂😂😂😂😂
The supreme irony when I saw my first GM LSx V8 many years ago, was that GM rummaged through Ford's 351W tooling scrap heap and, essentially released the 'next gen Windsor' family.
Although it appears Ford has a motor, the 2020 Godzilla 7.3L Eight that may be what the Dr ordered to repower the remaining Panthers out there.
Forever Student Armando Bonilla Olivieri of Warren harding High School in Bridgeport Connecticut to bonifacio Ssnchez jimenez in aibonito puerto rico because of 56 maiden lane 06608 and I am a mecanic today and the best and forever and forever .bridgeport Connecticut.
i mean... yeah LS swap it.. why not !!