el titulo seria limpieza no restauracion) supongo que lo abra echo xk si no no arrancaria. limpiar carburador, no poner junta al cigueñal, afilado de cadena,pulir cilindro, etc.. no esta mal lo demas del video
I wondered why the chainsaw in the end wouldn’t cut so fast like it would, the chain has been put backwards, causing the issue of cutting those branches etc, surely that was noticeable?
@@restorerestoration4705No man the chain is fine the way you put it, the tooth must be from the front of the cutting edge the way the chain is turning.. So its fine..
3 things that are not correct from the title... Rusty, no.. its a plastic saw. Restoring, no.. there is nothing restoration at all. Old, no.. its a new chinese copy saw with the model 2600.. If your gonna do a video with title Talented, do a proper job, not this crap.
всичко хубаво, ама ми се струва, че отначало веригата е поставена на обратно, което не е фатално, защото след това се вижда, че е толкова тъпа, че няма значение в коя посока ще я поставиш. Освен това не разбрах какво точно се реставрира на тази чисто нова машина
BS ...this was not a "rusty old chainsaw" but a cheap chinese zenoag - komatsu g2500 clone , intentionally got rusty ( acid maybe ? ) and dirty to make the video. 😮
This guy has no idea what he's doing. All he did was take the saw apart and do a "Liquid Rebuild" aka paint. No carb rebuild/clean, no new crank seals or ring, no grease on the clutch bearing and to top it off the chain was installed backwards. HACK!
Я в цьому відео не побачив як замінюєте паливопроводи і маслопроводи. Також не були замінені ущільнювачі двигуна. Не показано як відновлювали карбюратор. Перемили і пофарбували. Перевірка тупим ланцюгом. Відео ні про що. До речі фарба із пластикових деталей бистро злізе.
Like awals verry good
Thanks very much . We will try in the next videos
Best sir,,
Greetings in Indonesia
Thanks very much . We will try in the next videos
Nice servicing.
Thank you very much
Great fun to watch. Thanks.
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health
🙂 gracias por el video 🤝 es vien vonita
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
Galing👍
thank you
beautiful restoration
Thank you very much. Wishing you and your loved ones good health!
tuyệt vời
Very good but you gotta flip that chain around
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
🇹🇷♥️okey eline saglik.🌷♥️🇹🇷
Thanks a lot . Please always follow and support us!
❤
Thanks very much . We will try in the next videos
el titulo seria limpieza no restauracion) supongo que lo abra echo xk si no no arrancaria. limpiar carburador, no poner junta al cigueñal, afilado de cadena,pulir cilindro, etc.. no esta mal lo demas del video
Thanks very much . We will try in the next videos
It was all good until you painted the plastic lol.
Your feedback is the driving force for us to develop! Wishing your family good health and sincere thanks
Very good🎉
Thanks very much . We will try in the next videos
Like 🎉
Thanks very much . We will try in the next videos
👌
Thanks very much . We will try in the next videos
Very nice restoration.Your chain needs sharpening.
Thanks very much . We will try in the next videos
very good job !! ty
You are so wonderful and we really appreciate you
コレは電ノコですね!🪚
Thanks very much . We will try in the next videos
hangi marka 2t yağ önerirsiniz?
Good
Thanks very much . We will try in the next videos
Итак чем ремонт заключается? Разобрал помыл собрал все? Двигатель можно было и не разбирать да пилу тоже с мойки автомобиля помыть в сборе и все!
Thanks very much . We will try in the next videos
ebody good joob
thank you !!
Craftsman what it appears to be or home light
Super jest to zrobione i odrestaurowane pozdrawiam serdecznie 👍👍👍👍👍👍
Thank you very much
Good job, must have taken ages 👍👍
Thanks very much . We will try in the next videos
Piston size please?
Снова этот волшебный порошок! Что все восстанавливает)))
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
Please tell me wrist pin bearing number of thish mechine because i am olso repair a mechine.i don't know the bearing number and old bearing is broken
The person that made the video is an idiot. Just search for 25cc Chinese chainsaw or G2500 and you will find the parts you need.
Essa corrente tá pouco sega
👍👍👍👍👍👍👍👍👍👍👍👍👍
You had the chain on backwards
Thank you very much
I wondered why the chainsaw in the end wouldn’t cut so fast like it would, the chain has been put backwards, causing the issue of cutting those branches etc, surely that was noticeable?
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
😢
😢😢
Тому що ланцюг потрібно загострити.
You Put the chain in reverse
Lol 😂😂
😂😂😂😂
Thanks very much . We will try in the next videos
@@restorerestoration4705No man the chain is fine the way you put it, the tooth must be from the front of the cutting edge the way the chain is turning.. So its fine..
🤗👍🙏🏻🇻🇪
Thanks very much . We will try in the next videos
no seal :?
Sta nuova di dentro.
А че пружинку не поставил от блокировки полотна?
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
repair your shoes
Tai ne restauravimas, plovimas ir tiek. Iš 10-5 balai.
Thank you for your contribution
Dagli un affilata a quella catena che non taglia manco l aria
Thanks very much . We will try in the next videos
Все хорошо, но когда вы начинаете красить , это обморок 👍😁
Thanks very much . We will try in the next videos
3 things that are not correct from the title... Rusty, no.. its a plastic saw. Restoring, no.. there is nothing restoration at all. Old, no.. its a new chinese copy saw with the model 2600.. If your gonna do a video with title Talented, do a proper job, not this crap.
Thank you for your feedback
This is a cheap Jon Cutter clone, Chinese G2500 or 25cc saw. Many rebrands. Great little saws but hardly worth the effort to restore.
всичко хубаво, ама ми се струва, че отначало веригата е поставена на обратно, което не е фатално, защото след това се вижда, че е толкова тъпа, че няма значение в коя посока ще я поставиш. Освен това не разбрах какво точно се реставрира на тази чисто нова машина
Thanks for your feedback
BS ...this was not a "rusty old chainsaw" but a cheap chinese zenoag - komatsu g2500 clone , intentionally got rusty ( acid maybe ? ) and dirty to make the video. 😮
This guy has no idea what he's doing. All he did was take the saw apart and do a "Liquid Rebuild" aka paint. No carb rebuild/clean, no new crank seals or ring, no grease on the clutch bearing and to top it off the chain was installed backwards. HACK!
You didn't restore anything....you just painted a chainsaw. That's all.
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
@balaurul100: And what did you do? Sat at home moaning. Get a life, man.🥵
Shut up bruv don't watch it if you don't like what he's doing
Amazing job, great restoration 10/10 don't listen to haters that think they can do a better job
Я в цьому відео не побачив як замінюєте паливопроводи і маслопроводи. Також не були замінені ущільнювачі двигуна. Не показано як відновлювали карбюратор. Перемили і пофарбували. Перевірка тупим ланцюгом. Відео ні про що. До речі фарба із пластикових деталей бистро злізе.
Цепь тупая.
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
Piston size please