Good show, great editing! There's just something beautifully comedic about a wife's giggle when your threading a stubborn nut and bolt from a stress position. Take care.
Thank you Arty! The editing is what takes the most time on these videos and T bone is becoming a real pro at it 😊. Thank you for being part of our youtube family!
Congrats T-Bone on 56,000 subs!👏 Another very informative video sir. Make sure you thank Mrs T for doing an excellent job on the camera and making you look like a star!⭐️ 😉👍📽
JD definitely had their thinking caps on for this design. The PTO electrical connector topside where you can see what you’re doing and actually get two hands on it seems to be the best option. Also that spring-loaded belt guard!
Taylor, it was extra funny because I had just had a hip cramp a few minutes earlier yet still trying to hold the camera still! 😂 Thanks for your comment! We love our youtube family!
That belt looks so long I was thinking you were going to have to cut some of it and duct tape it back together again just kidding about the cutting but I did look too long but I did see you use it up thank you for the video
Nice job T-Bone, you always make the difficult stuff look easy. On a daily basis my shop is at least PG-13 or worse. 🤣😲 We got a quick glance of Sweetie Knievel there for a second. 👋👋
@@RaleysSmallEngines yeah, I wondered if there would be enough room to attach it to the arm that way. Gonna take another look. I enjoy your videos, good stuff. 👍
I bought a 2017 Z535M, the original owner told me that both the transmissions went out under warranty. Then the left transmission stopped working, and John Deere want $1800 to replace it. I got it cheap, I just wanted the engine. 159 hours. I was thinking about fixing, but since both transmissions went out under warranty I don't see any sense in fixing a piece of junk. I have the other parts for sell
Replacement Hydrostatic Drive Belt Link
amzn.to/3Ocafjc
Replacement Deck Belt
amzn.to/4fNQ5bb
My my my, TBone you and Ms Tee are the best. Always enjoy watching
Y’all’s videos. Tks for your time and effort.
We appreciate you my friend! Thanks for watching!
Good show, great editing!
There's just something beautifully comedic about a wife's giggle when your threading a stubborn nut and bolt from a stress position.
Take care.
Haha, she gets a kick out of all of this! Thanks for watching!
Thank you Arty! The editing is what takes the most time on these videos and T bone is becoming a real pro at it 😊.
Thank you for being part of our youtube family!
I’ve got a spring puller that looks very similar. The coated welding filler rod is definitely great for all sorts of projects. 🔧👍
It sure does come in handy. Thanks for watching!
Wow I sure do appreciate you guys putting all those videos out. Good songs too. If I ever get back your way I ll have to pop in and say hello.
Congrats T-Bone on 56,000 subs!👏 Another very informative video sir. Make sure you thank Mrs T for doing an excellent job on the camera and making you look like a star!⭐️ 😉👍📽
Thank you, will do Roger.
A big thanks to our loyal youtube family like you Roger!😊
Great work once again and thanks to Mrs. T for the great camera work and angles!
Thank you too!
Thank you Raul!
you tell us how to do it right. good job mr and mrs t bone
Thank you my friend
Thank you Francis!
Hey! It's Steve Wozniak, working on a lawn tractor!
Is your patience always that good or should I really be asking Mrs T. Hi Mrs T. Awesome camera work as usual
I'm sure Mrs T will reply. LOL Yes, thank you, Mrs T does some great camera work.
Rob, we try to make this a family friendly channel but at times it can be difficult 😅
@ 😂😂
Another well done video
👍👍👍. Thank you both
Thank you Pete!
Our pleasure!
JD definitely had their thinking caps on for this design. The PTO electrical connector topside where you can see what you’re doing and actually get two hands on it seems to be the best option. Also that spring-loaded belt guard!
Excellent job T-Bone👍, and really good camera work Mrs T-Bone 📹fancy laughing when T-Bne was getting cramp 🤣🤣
Thank you so much 😁
Taylor, it was extra funny because I had just had a hip cramp a few minutes earlier yet still trying to hold the camera still! 😂
Thanks for your comment! We love our youtube family!
Good job, T! From the one I recently did (my first ever) I’ve determined these are definitely cuss-worthy jobs! 😂👍
That belt looks so long I was thinking you were going to have to cut some of it and duct tape it back together again just kidding about the cutting but I did look too long but I did see you use it up thank you for the video
Haha! Yeah that belt is longer than a football field. Thanks for watching!
The flux capacitor is what makes time travel possible
😄Heck Yeah
Nice job T-Bone, you always make the difficult stuff look easy. On a daily basis my shop is at least PG-13 or worse. 🤣😲
We got a quick glance of Sweetie Knievel there for a second. 👋👋
Thank you John
Anytime brother
It's T Bone's editing that makes it look easy 😊
@@Mrs.T-bone so the ole boy uses camera trickery and Tom foolery?? 🤣🤣
Need something (clamp) to hold the belt on the pulley here while you're putting it back together. 12:53 😮
Great idea my friend. I've done so many it's not an issue, just difficult working around a light and cameras and allowing room for viewers to see.
I have a 425z mine broke the frame and could not get the belt to tighten. Had to pull the rear end back..
Would it have been easier to put the bolt in from the bottom and the nut on top. 😮 13:44
Thanks for your idea, it wouldn't work that way because it's so close to the deck. Great comment my friend.
@@RaleysSmallEngines yeah, I wondered if there would be enough room to attach it to the arm that way. Gonna take another look. I enjoy your videos, good stuff. 👍
Is that straightener calibrated in millimeters or inches ? 😅 10:55
Ummm what's a millimeter? Lmao 😂Also that is a special made Left Handed Hammer LOL
Might it have been easier to put the belt on the pump pulleys first? 😮
Good point Paul. I didn't because I didn't think it would be long enough to get around the PTO clutch. Great idea and observation my friend.
@T-BoneAfterhours yeah, I was thinking do everything except the one under the cover and muscling it on last.
Hi how are you doing today or not
That drive belt has been given a wedgie 😂
😂Too Funny
@T-BoneAfterhours main thing is that you got it running again t- Bone 🦴🍗
When you were replacing the transmissions belt you completely forgot to check the idler pulleys WHY??
Great observation. I did check them but forgot to show on camera. Thanks for your comment my friend.
I’m sure he didn’t forget. He probably just didn’t film it.
👍
Thank you Norris!
I believe you've done that before.
LOL a time or two. Thanks for watching and commenting my friend.
I bought a 2017 Z535M, the original owner told me that both the transmissions went out under warranty. Then the left transmission stopped working, and John Deere want $1800 to replace it. I got it cheap, I just wanted the engine. 159 hours. I was thinking about fixing, but since both transmissions went out under warranty I don't see any sense in fixing a piece of junk. I have the other parts for sell
Wow! 159 hours, how sad!
@Mrs.T-bone
Yes, but the engine went on a Yazoo zero turn 2004 year and it's doing a great job.
I can't drive 5.5 !!
Bad to the bone
Good work
Crap design
Thank you, yes it is.
👍
Thank you Troy!