ya like he doesnt try to market it to us with all the fancy stuff, he earns our service loyalty through quality of advice and information! love jperm's channel, he da GOAT
thanks for the advice, I can definitely get better at a lot of this!! Imma do a couple things 1) plan the execution of my cross in inspection, not just the solution 2) use more inspection 3) attempt not to default to the front right slot 4) pause to recognize case and auf--any angle 5) stick w my current PLL's as it dont matter all that much being only 18-19 average 6) improve fingertricks but in terms of priority: 1) Fingertricks, 2) know execution, not just solution--cross 3) not default to front right 4) recognize auf and case b4 execution of both 5) use more inspection 6) stick w current algs for LL
Thank you for giving me permission not to try to be doing look ahead! I’m a fully casual solver and was feeling bad that maybe I should be trying to look ahead, but I’m still just learning to trust how I solve F2L cases and being slot neutral. My latest timed solve was 1:30, so when I say casual, I mean it. Haha
Hello J perm you are the person that got me into cubing, and I am planning on getting the MoYu Rs3 2020. So thank you for taking me on a never ending journey
Even as a Rouxer, this video was nice and constructive for me. Thank you so much! I think I'll start by inspecting without the timer until I can get a full first block during inspection. Then maybe I'll move to improving my CMLL recognition or my FB finger tricks.
solving front right F2L slot is my biggest problem. I will work on it! Thank you for the great video! Currently averaging around 17 seconds with full OLL and PLL.
A common mistake I always make is get into cubing and do it everyday then one day I just stop then after a while I come back and forget all the algs I learned before I stopped.
J Perm: You SHOULD be this J Perm Me: Woah a whole new ALG to learn... *tries for 10 minutes* I'm never going to get this. I give up I'm just going to stick with my current ALG... Me 20 seconds later: My ALG is the one he's recommending.... I just don't recognise it because my fingers know what to do and I haven't a clue!
7:10 Good Grief? Did I miss an update? As a recent learner of full PLL, I used your 2017 video Fast PLL Algorithms & Finger Tricks, which shows the same Jb alg but with two regrips. This video (same alg) shows such a smooth, buttery and easy regripless way, that I've been figuratively slapping my forehead for the past ten minutes at all the effort I could have saved.
I’m currently learning full ppl and Im going at the rate of 2 per day and I’ve learned 6 so far and I’m doing great. I hope it won’t be too overwhelming in the later stages but I’m already notic similirarites between the algorithms,
Hello J Perm, I just wanna say thank you a lot, you've helped me throughout these months, in cubing, my PB is 27.42, your amazing tutorials always helped me a lot and I'm grateful you make tutorials for us, you're an inspiration and I hope you continue and keep up the very great work, even though I haven't commented in a lot of videos, and even though I'm using a very cheap speedcube about 10$ (Qiyi Warrior) still I appreciate your work and yea good luck :)
yo man, whats your pb now? What did you imporve on after 2 years. I recently started speedcubing(been about 3-4 months),my pb is 20.59s I also use a cheap cube of NRs 250~=$2
Confirms I'm already headed in the right direction, but that means this is actually good timing to get me to double down on my efforts with these. And, then I was getting ready to go choose a J-Perm alg. So, perfect timing. Gawd knows what I might have picked on my own. Thank you so much.
Tbh, I basically have all these bad habits, once I get back into “serious” cubing, I’ll definitely try to improve, thanks j perm! Btw where’s the background music? I miss it :(
One of my mistakes is not learning what next algorithms I need, I thought f2l would take day and it took an hour because of your amazing tutorial! Also me ignoring specific ppl cases, I filed it out and learned the stupid g and r perms now my "mistake" is probably both not learning I'll cases ( I'm 2 look I'll tryna be 1 look) and not practicing getting better I'm basically just practicing and hoping I'll get faster but I know that with my skills and lags that I can't ever be sub ten lol I gotta trade certain things for others and work on look ahead of course
I love how J Perm is so straightforward that he doesnt even have an intro. Like, if you dont read the title you wont even know what the video is about.
Hi j perm I just wanted to say thanks because it is by your help that I have become a sub-20 speedcuber!!! I always see your tips videos your shortcut videos, etc. Thanks a lot!!!
Cheers i perm. I have been cubing nearly 4 months now. I got a rubiks brand for Xmas and an rs3m 2020 shortly after I could solve. I’m still on beginner method and can sub 1 minute quite regularly. Looking to learn CFOP now. Keep up the awesome content
As, a sub 15 cuber, my only 2 bad habits are the lack of look ahead and the lack of inspection. I think the latter is what I will work on. Your advice on taking 1.5 minutes for inspection at home was quite helpful. Thanks! Like if you have the same bad habits!
yes, that is right. I however look ahead my first f2l pair during the cross time and lose practically no time turning the cube. I am getting worse times doing the cross on the bottom.
Fun Fact : Moyu weilong line is special for J perm for these reasons Gts - First time got top three in competition. Gts2m - First Magnetic cube Gts3m - first cube with Moyu dual adjustment system system Wrm - first cube on which he got pvc coating wrm 2020 - first cube unboxed after wisdom teeth removal
I got my cross solutions relatively well figured out (that first cross solution you did, I would have done the same way). But I find it quite hard to search for my first F2L pair during inspection, especially considering the moves I do for the cross change the F2L pair locations... Will have to take those up to 1 Min 30 Secs to get this down though.
It took me a while to discover a few things about planning the cross. For whatever reason, my brain cannot memorize the color scheme. It's just a mental block. Then I realized 2 things: 1) you have the colors IN FRONT OF YOU (i.e. on the cube). You can always just look at it to remind you that red is opposite orange, etc. 2) Once you have one pair of opposites planned in your head, its either aligned or "anti" aligned. If aligned, then the other pair should match up. If not, then it should be opposite. In my brain, this reduces the amount of information that I need to "plan" by a lot. Probably doesn't make sense to many people, but it does to me.
I just learned full PLL. Now I want to work on being more solid in F2L... turning my F2L case knowledge into muscle memory and get out of my 'front right slot' habit & doing more pinch U-turns.
Of these, my biggest weaknesses are that: 1) I don't even plan finger tricks for the cross and 2) I only recognise OLLs from certain angles (and I'm slow to recognise and execute them). So that's what I'll work on. Once I've finished practising blindfolded...
wow. this whole time i thought u HAD to line up pll in order to do the algorithm. my mind was blown my step 7 i literally got up out of my chair and yelled at my computer...
I agree with you for the 1st point I sometimes try to finish 2 centers together with the cross and most of the times end up with a 8 second cross so for now I am happy
I def. need to remember to inspect longer and plan more. my bad habit is to see one thing and just go for it, without actually _planning_ it, on the theory that I'll figure it out as I go. actually planning it properly will make other things easier if I stick to it.
I would avoid B moves for cross no matter what, it is better for me to do wide r or wide l moves, or even M or M' moves when needed. I am not kidding. Cross pieces are edges, so M or M' moves would work well enough, you will be able to avoid weird fingertricks. Just figure out how many bad edges there are in a cross situation, if there are at least two bad cross pieces, use M or M' moves, wide r or wide l moves would be sufficient, too. Sometimes, even if there are only one bad cross piece, you can use M or M' moves to deal with it anyway. If you can use M or M' moves or wide r or wide l moves for F2L, there will be no problem using them with cross, it will reduce your movecounts, and it is more convenient.
Another algorithm booster here 🎉 Thanks for the videos, man. Not only are you amazing at doing it, your explanations are top notch. I learned F2L from you smoothly, then went to watch some other chanels' vids on it, and many of them were completey impossible to comprehend compared to yours. Thanks! 🔥
![[New] Rubik's Cube: All 21 PLL Algorithms & Finger Tricks](http://i.ytimg.com/vi/9r_HqG4zSbk/mqdefault.jpg)
![[New] Rubik's Cube: All 21 PLL Algorithms & Finger Tricks](/img/tr.png)
What are some other common mistakes/bad habits that you've experienced?
Making cross on the top and alot of regrips
Bad look ahead, my brain is too lazy to focus :/
Rotating during the cross
Inefficient algorithms
I like to have a huge soundtrack of large audiences talking and listen to it while cubing.
Who else just loves the fact that J perm just gets straight to the point, he doesn’t take so much time doing a massive intro
*number one*
ya like he doesnt try to market it to us with all the fancy stuff, he earns our service loyalty through quality of advice and information!
love jperm's channel, he da GOAT
Hes like not even, hey j perm here and today the video is about to biggest problems cubers have ....
yea right i like it and thats why his subscribers are more than other cubing youtubers
i do because thats how he make rubik's cube tutorials in less than 10 minutes
The Number 1 Intro Is Back!
*Number 1*
Number 15
Someone baked a hamster into my muffin
Ye
@@karloklaric lol
hm
thanks for the advice, I can definitely get better at a lot of this!!
Imma do a couple things
1) plan the execution of my cross in inspection, not just the solution
2) use more inspection
3) attempt not to default to the front right slot
4) pause to recognize case and auf--any angle
5) stick w my current PLL's as it dont matter all that much being only 18-19 average
6) improve fingertricks
but in terms of priority:
1) Fingertricks,
2) know execution, not just solution--cross
3) not default to front right
4) recognize auf and case b4 execution of both
5) use more inspection
6) stick w current algs for LL
So,how did it go mate?
4:08 wow that was smooth 🤘🤘🤘
Hearing you say it took 1:30 before getting cross down makes me feel so much better. Thanks for the great tips
“Secret Mistake #11: Not praying for a LL skip before each solve”
-J Perm 2021
I am doing this from last 6 months
1 look 3x3 ;)
If you can oll during f2l why not pll as well
Timestamp?
@@chopchophowdydo the very end, can't be skipping the patrons
Thank you for giving me permission not to try to be doing look ahead! I’m a fully casual solver and was feeling bad that maybe I should be trying to look ahead, but I’m still just learning to trust how I solve F2L cases and being slot neutral.
My latest timed solve was 1:30, so when I say casual, I mean it. Haha
7:19 From somebody fast that you trust
*Shows his own videos*
i mean do you not trust the cubing god jperm
it’s because he just searched up something related to cubing and of course he shows up at the top. Some other people were shown but just lower down.
How does your cubes look so nice and clean. Am I the only one noticing this?
thats because his nails r cut small and his background is super cool,which makes it look v good,our cubes prolly look just as nice and clean too
They look normal to me
His cube sounds much more quiet than my RS3M and it also looks super clean. Mine gets filled with this weird white dust in 2 days. 😔
@@quazinafizsadiq104 he said to lube it every month in some other video
@@sayonmondal3454 I use a water based lube. How many drops should I give then?
Wow, I never even realized that double recognition was a thing, or that I was doing it so much. Thanks for giving me something new to improve on!
Hello J perm you are the person that got me into cubing, and I am planning on getting the MoYu Rs3 2020. So thank you for taking me on a never ending journey
Even as a Rouxer, this video was nice and constructive for me. Thank you so much! I think I'll start by inspecting without the timer until I can get a full first block during inspection. Then maybe I'll move to improving my CMLL recognition or my FB finger tricks.
glad to see another Rouxer in Jperm's vids lamao
solving front right F2L slot is my biggest problem. I will work on it! Thank you for the great video! Currently averaging around 17 seconds with full OLL and PLL.
A common mistake I always make is get into cubing and do it everyday then one day I just stop then after a while I come back and forget all the algs I learned before I stopped.
J Perm: You SHOULD be this J Perm
Me: Woah a whole new ALG to learn... *tries for 10 minutes* I'm never going to get this. I give up I'm just going to stick with my current ALG...
Me 20 seconds later: My ALG is the one he's recommending.... I just don't recognise it because my fingers know what to do and I haven't a clue!
From watching your channel, I’ve avoided most of these bad habits (thank you!). I’ll have to start working on double recognition now!
6:29 that U2 was amazing
7:10 Good Grief? Did I miss an update? As a recent learner of full PLL, I used your 2017 video
Fast PLL Algorithms & Finger Tricks, which shows the same Jb alg but with two regrips. This video (same alg) shows such a smooth, buttery and easy regripless way, that I've been figuratively slapping my forehead for the past ten minutes at all the effort I could have saved.
Jperm: Use your inspection time.
Max Park in his 3 second solve: Uggghhhh...
He is at another level
Last time I was this early, JPerm was not sponsored yet
Jperm: solves cross in 0.5 seconds. Also Jperm: CHILDREN!!!GATHER!COME!!
Lol
I’m currently learning full ppl and Im going at the rate of 2 per day and I’ve learned 6 so far and I’m doing great. I hope it won’t be too overwhelming in the later stages but I’m already notic similirarites between the algorithms,
the two bad habits I have in this video is the un godly amount of cube rotations and cube rotating just for an algorithm
Hello J Perm, I just wanna say thank you a lot, you've helped me throughout these months, in cubing, my PB is 27.42, your amazing tutorials always helped me a lot and I'm grateful you make tutorials for us, you're an inspiration and I hope you continue and keep up the very great work, even though I haven't commented in a lot of videos, and even though I'm using a very cheap speedcube about 10$ (Qiyi Warrior) still I appreciate your work and yea good luck :)
Thank you and good job on your improvement :)
@@JPerm jperm!
yo man, whats your pb now? What did you imporve on after 2 years. I recently started speedcubing(been about 3-4 months),my pb is 20.59s I also use a cheap cube of NRs 250~=$2
Confirms I'm already headed in the right direction, but that means this is actually good timing to get me to double down on my efforts with these. And, then I was getting ready to go choose a J-Perm alg. So, perfect timing. Gawd knows what I might have picked on my own. Thank you so much.
bro just called me trash 10 times and explained why in 8 minutes 😭
I’m definitely going to work on the R U R’ moves
8:29 I'm looking too much at the pair I'm currently doing, i'll try to fix that
Practicing all this this helped me get from 25 to 16 seconds average in a month. I will forever be thankful J Perm!
@holatontos thanks man
Tbh, I basically have all these bad habits, once I get back into “serious” cubing, I’ll definitely try to improve, thanks j perm! Btw where’s the background music? I miss it :(
j perm is cool
@@atticuslul8626 yes. But pi cubing official is cooler jkjk
The RUR' grip tip is really going to help. Glad I didn't wait to long to re-adjust.
One of my mistakes is not learning what next algorithms I need, I thought f2l would take day and it took an hour because of your amazing tutorial! Also me ignoring specific ppl cases, I filed it out and learned the stupid g and r perms now my "mistake" is probably both not learning I'll cases ( I'm 2 look I'll tryna be 1 look) and not practicing getting better I'm basically just practicing and hoping I'll get faster but I know that with my skills and lags that I can't ever be sub ten lol I gotta trade certain things for others and work on look ahead of course
Technically using this way could make it so that eventually you could one look a entire solve in less then 15 seconds of inspection very often.
I love how J Perm is so straightforward that he doesnt even have an intro. Like, if you dont read the title you wont even know what the video is about.
Hi j perm
I just wanted to say thanks because it is by your help that I have become a sub-20 speedcuber!!!
I always see your tips videos your shortcut videos, etc. Thanks a lot!!!
Hey J Perm,
Could you make tutorial on "HOW TO SOLVE AN AXIS CUBE"
Plz make video on it
J Prem
Plz make on it
@[GD] Sans Playz hmm ?
@[GD] Sans Playz ohhkk !!!😅😅
I still make some of these mistakes but this video has shown me how much progress I've made. Thanks J☺️
I definitely need to use more inspection time.
Just learning what not to do. Just started doing CFOP and trying to improve. Looking to use these ideas and not fall into any bad habits.
The best intro ever.
Cheers i perm. I have been cubing nearly 4 months now. I got a rubiks brand for Xmas and an rs3m 2020 shortly after I could solve. I’m still on beginner method and can sub 1 minute quite regularly. Looking to learn CFOP now.
Keep up the awesome content
As, a sub 15 cuber, my only 2 bad habits are the lack of look ahead and the lack of inspection. I think the latter is what I will work on. Your advice on taking 1.5 minutes for inspection at home was quite helpful. Thanks! Like if you have the same bad habits!
Oh yeah, and I still do cross on the top and I am trash at M moves. For most, H perm is their favorite, for me, its my nightmare. :P
@@Nitstar6174 you are sub 15 and yet you do cross on top? Wtf are you made of
yes, that is right. I however look ahead my first f2l pair during the cross time and lose practically no time turning the cube. I am getting worse times doing the cross on the bottom.
A
A
I have a bad habit of not planning the cross and the first f2l pair even though I know how to. I am a bit lazy to do that☺️
same i just look at all the peices and just identify my f2l
then i reailize that im stupid and did not do the cross
8:45 Secret mistake #11: Not praying for a LL skip before each solve -Jperm 2021
Yesss finally i'm early at a jperm vid :))))
Fun Fact : Moyu weilong line is special for J perm for these reasons
Gts - First time got top three in competition.
Gts2m - First Magnetic cube
Gts3m - first cube with Moyu dual adjustment system system
Wrm - first cube on which he got pvc coating
wrm 2020 - first cube unboxed after wisdom teeth removal
🤣ya
I´m not first but
I´m not last
When J Perm uploads
I CLICK FAST
stop spamming
Stop spamming
Ya stop
Wow this is a very relevant comment that expands upon the topic covered in the video!
@@dpage446 these are very relevant comments* because he posted this like 6 times...
So happy that my friend taught me advanced algs for PLL from the start. it makes it easier if in the long run.
What about U3
U3 is the same as U'
Bro has to be joking
I got my cross solutions relatively well figured out (that first cross solution you did, I would have done the same way).
But I find it quite hard to search for my first F2L pair during inspection, especially considering the moves I do for the cross change the F2L pair locations... Will have to take those up to 1 Min 30 Secs to get this down though.
this comment is here to help the youtube algorithm
Speaking of algorithms...
J Perm and Cube For Speed uploaded at the same time!
Remember i am faster than you framecounted.
But my pickup is slow
@@cubiciann3233 tru
I was just starting to do the homework having pen in the hand but got notification 😭😭😂
It’s okay we all do it ☠️
Me too exactly
@@tln_greks2896 are you here?
Youre what final sans
Genocide or the good one
Again he came with ' NO 1'
Loved a lot❤️❤️❤️
oh my god im fast i did not even read the title lmao
Samee
@@gunjanshah4844 bro youre 10 min. Slower than kheang cubezz
@@nine_moons3073 I had notification and I clicked without even reading the title.
guys since you are here may you subscribe i will sub to u guys too
Ok
Bro love your videos
jperm uploads a video
its not a wierd 30 min challenge
you were early to it
its a useful video
Due to covid i havent gotten to be in a comp, so i stopped cubing but i still watch cubing vids mainly because of the smooth sounds of a cube turning
I want say thanks to you as I have finally learned all plls through your Website.
Thanks a lot ...... ❤️❤️
Hey j perm can I get a heart from you?
Please🥺🥺
I barely use inspection time... and I suck at planning cross which is probably why
good night j perm🙂
why I sleep so early?
cuz I am from Hong Kong lol
And i am in singapore. Which is why i know as well XD
i have a comp this week and when i needed you the most you came
Good luck!
I thought it said “11 months ago” not eleven minutes... needless to say I still clicked bc Jperm
Other RUclipsrs: Hey guys welcome to another video...
J Perm: Number one
It took me a while to discover a few things about planning the cross. For whatever reason, my brain cannot memorize the color scheme. It's just a mental block. Then I realized 2 things: 1) you have the colors IN FRONT OF YOU (i.e. on the cube). You can always just look at it to remind you that red is opposite orange, etc. 2) Once you have one pair of opposites planned in your head, its either aligned or "anti" aligned. If aligned, then the other pair should match up. If not, then it should be opposite. In my brain, this reduces the amount of information that I need to "plan" by a lot. Probably doesn't make sense to many people, but it does to me.
Another strategy is to memorize adjacent pairs:
* Red, Green
* Orange, Blue
Alternatively memorize opposite pairs:
* Red, Orange
* Green, Blue
I have a hard time planning the cross because it’s hard to track all the pieces and remember my solution when I do it
People like me comment first before watching the video LOL
Me: wake up
RUclips: jperm had uploaded a new video
I am sub 30
I just learned full PLL. Now I want to work on being more solid in F2L... turning my F2L case knowledge into muscle memory and get out of my 'front right slot' habit & doing more pinch U-turns.
I used the beginner method for sooooo long! Then I finally started learning some perms, then I learned f2l then I got two look oll, work in on 1 look.
some perms lol
Of these, my biggest weaknesses are that: 1) I don't even plan finger tricks for the cross and 2) I only recognise OLLs from certain angles (and I'm slow to recognise and execute them). So that's what I'll work on. Once I've finished practising blindfolded...
wow. this whole time i thought u HAD to line up pll in order to do the algorithm. my mind was blown my step 7 i literally got up out of my chair and yelled at my computer...
Yes the number 1 intro
I agree with you for the 1st point I sometimes try to finish 2 centers together with the cross and most of the times end up with a 8 second cross so for now I am happy
4:12 that was soooooo smooth
I def. need to remember to inspect longer and plan more. my bad habit is to see one thing and just go for it, without actually _planning_ it, on the theory that I'll figure it out as I go. actually planning it properly will make other things easier if I stick to it.
Thanks for all the info...I am starting to get sub 40 with 2 look oll and one look pll..All thanks to you...Next step 1 look oll...
4:05
J perm in 2050: 59 S moves every solve
Brian Sun: YESS
I make these mistakes all the time but I never noticed, thx 4 pointing them out 4 me
I would avoid B moves for cross no matter what, it is better for me to do wide r or wide l moves, or even M or M' moves when needed.
I am not kidding.
Cross pieces are edges, so M or M' moves would work well enough, you will be able to avoid weird fingertricks.
Just figure out how many bad edges there are in a cross situation, if there are at least two bad cross pieces, use M or M' moves, wide r or wide l moves would be sufficient, too. Sometimes, even if there are only one bad cross piece, you can use M or M' moves to deal with it anyway.
If you can use M or M' moves or wide r or wide l moves for F2L, there will be no problem using them with cross, it will reduce your movecounts, and it is more convenient.
I only have one bad habit and started cubing in august of 2020 and am sub 15.
Thanks J Perm
I started at the same time but now i am sub 19
Other youtuber: Hey guy-
J perm: Number one
thanks for this video its super helpful i was haveing trouble understanding what my mistakes where so this has enlightened me
Another algorithm booster here 🎉
Thanks for the videos, man. Not only are you amazing at doing it, your explanations are top notch. I learned F2L from you smoothly, then went to watch some other chanels' vids on it, and many of them were completey impossible to comprehend compared to yours. Thanks! 🔥
The Description of this video is GOLD
I do a lot of these. Will work on them, thanks!
A few weeks ago I averaged 30-32 seconds, I learned look ahead and now I average 20-22. Its really effective!
wow great video! i didnt realize how bad i USED to do my cross
7:35 I used to do it like that but ever since I saw you do it I changed!
J Perm Thank you! I do to many re grips now my time is going down!
Am I in heaven? I just woke up an JPerm posts a video 10 minutes ago.
I'm definitely praying for a LL skip JPern
Advice 11 was great
I am almost always using only 3-5 seconds of inspection. Thanks for video, i will use some of these tips
Thank you so much I am new to cubing and you are my favourite cuber keep up the good work
5:01 ayyyy yooo I didn’t know that it’s so useful now thx bro
Currently solving at 2:30 seconds, still learning 2 look methods. Two take aways at this stage, the first f2L and the hand placement for RUR’