Here in India we have 240v AC 60Hz and we use 40 watt ballasts for both 36 and 40 watt tubes it goes fine with magnetic ballasts as well as electronic ones
Лампе можно дать вторую жизнь подав на неё постоянное напряжение. Лампу подключают непосредственно к диодному мосту из четырёх диодов, чёрной стороной к плюсу, а противоположной белой стороной к минусу. Диодный мост подключают к сети 220 вольт через соответствующий мощности лампы дроссель. Стартер подключаем как обычно.
На 0:14 Лисма ЛД 20W Г.Саранск
Вот это да...живучая лампа!
Yes, in the case the fluorescent tube shows blackening with turned red and flickering, that means it is nearly dead or burnout.
А ведь на начальной стадии EOL можно было лампу к ЭПРА и она бы работала
I like the sound❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
I used 40w ballast to work a 18w bulb it just ok, but the end of the tube is glow brightly
@Leo Paulo Jiao nah flurescent tube can't explode its a low pressure lamp only hiqh pressure can explod
And i use 30 watt ballast on a 36 watt tubelight. But i m thinking of changing it s ballast because tubelight is dim
@@ducac-0457 use 40 watt ballast it will go fine by the way is it magnetic or electronic ballast
Here in India we have 240v AC 60Hz and we use 40 watt ballasts for both 36 and 40 watt tubes it goes fine with magnetic ballasts as well as electronic ones
Лампе можно дать вторую жизнь подав на неё постоянное напряжение.
Лампу подключают непосредственно к диодному мосту из четырёх диодов, чёрной стороной к плюсу, а противоположной белой стороной к минусу. Диодный мост подключают к сети 220 вольт через соответствующий мощности лампы дроссель. Стартер подключаем как обычно.
+AGL
полностью с вами согласен
+Mr26lumix
Если не трудно сделай видео про включение этой перегоревшей лампы с четыремя диодами как я описал выше ...
+AGL
Чуть не забыл ... если спиралька лампы будет оборвана, то её штырьки можно перемкнуть перемычкой из тонкой проволоки ... Удачи !!!
+AGL
браво много вы знаете :-)
+Mr26lumix What languege is it???
skąd wziąłeś te dławiki FL-6500?
dostałem
od znajomego
Jedna z moich lism podłączę pod sts-150 i tuz'a w oprawie domowej roboty na świetlówki 20w
Daj statecznik od LRF 80 , ale odpal ją przez tungsrama S410. Dostanie kopa i będzie niezłe widowisko przy elektrodach jak będą są topić :P
+Miki Gry
był na końcu statecznik STR80 - stopiły się doprowadzenia żarnika
+Mr26lumix
Wiem , że był. Ale świetlówka nie zapaliła (migała).
Czyli po filmie już migać nie chciała ?
już nie miała siły trochę się rozszczelniła
Można było dać statecznik lrf 1000w
I tungsrama s410
Mr26lumix
Who made this Fluorecent tube
ЛИСМА / LISMA
Podepnij kiedyś świetlówkę 4W pod statecznik LRF 1000W
Nie warto,nic ciekawego nie wyjdzie
OK.@@Mr26lumix
Why you threw this bulb ? Better is to save them for future.
This tube was at the end of its lifetime.
I know but if you put it on a pulse starter it will flicker out eont turn off on its own
Добивание светловки
2:26
Та лампа ФИЛИПС стоит что ты обалдел что-ли