THE SKID FACTORY: Pajero Shed Hangs
HTML-код
- Опубликовано: 8 сен 2024
- Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory Woody & Al prep the Pajero for some Off-Road 4x4 action by fitting a Winch, Dobinsons 2 inch Lift Kit and some Boos Bash Plates!
It might be a soccer mums Mall Crawler but at least Woody now looks the part when he's doing the shopping.
Boos Bash Plates: www.boosbashpl...
Dobinsons Spring & Suspension : dobinsons.com
Ridge Ryder Winch : www.supercheap...
Subscribe to Mystery Beyond Music!
• The Open Rift
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
www.instagram....
www.instagram....
/ theskidfactory
www.instagram....
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.
Everyone has different taste in cars so tell us... What do you drive?
GR Yaris. ^_^
1970 Mustang, 2005 Commodore and a V6 Aurion.
a 1992 Subaru SVX
Honda Element, with a turbo
Turbo Volvo 740
Enjoyed your fromage to the evo’s 👌🏽
It was a bit cheesy if you ask me.
The crookedness of the lights compensates for the crookedness of the intercooler...
Perfectly balanced, as all things should be.
Should square up when the windscreen pops out on flex🤣
If everything is crooked, is anything crooked?
As someone who does alignments in the US Midwest, I appreciate the understanding that those bolts aren't gonna move and the only thing to do is cut them out and replace them.
Yep, every 2nd one has at least 1 seized adjuster.
Or they’re already maxed out on adjustment.
I use an electric jackhammer, works a treat
god the amount of rust you must see. I live on the west coast, no salt lol
Love that you're doing something different. Hint with those winches.... You can rotate the clutch lever housing to orient it the direction you want.
Easy now that sounds like a good idea.
Wow, are you sure cause I have the exact same problem on my rangie
Its like 4 bolts to rotate them 😂
Rotate 90 degrees happy days
You can’t rotate this one or we would have.
Solid lookin bash plates, score - Taz.
What an entrance! I nearly spat my breakfast onto my computer! The videos always have awesome content and are a great start to the week, keep up the great work!
10:38 I can now Die happy that I got a skid factory shout out. and the cheeky grin from woody is the cherry on top.
Gell Blaster Love 👍🇦🇺
How good! Want to see these 2 rocking some gel blasters one episode 😁
I was about to tag you after he shouted you out haha
That initial interaction about being a mechanic and having to deal with dirty 4x4s with dusty clutches. Made my day. Cheers boys. Squash on
Places to visit on the Sunny coast? Woody's house of the deathly driveway. Great coffee!
It’s funny cause I use low range to get out of the driveway 😂
your kid makes some stellar music, you must be very proud.
Definitely a Moog / Daft Punk Tron Legacy vibe to it huh...
Wait a second, Al's kid makes the the music for the episodes? That's fucking rad!
....and I am glad to see it in action.
It looks like if you straighten the reg plate things won't look so crooked
What's the channel name, I couldnt quite hear what Alan said
Finally back onto the Bedford!
3:30 snow and ice is the best cause you bring them into the heated shop and they dont stop dripping till you're done cause it is just melting the whole time, the best tho is when you get a chunk of it down the back od your shirt.
I would suggest a small guard on the intercooler, the rope will wear through it very quickly if you end up pulling yourself regularly as the rope tends to not spool up nicely when winching in.
Just to add...
Don’t ever hook the winch hook back to the winch rope or cable.
Use a tree saver strap when winching to a tree/rock/root.
And a winch line damper is also a must
I was like “why are they building a tank under that Pajero?” Then I thought again and realized “oh because Woody” 😂
I like the romantic candle light around the 6 minute mark. Really adds to the ambiance of the shed. 👌
The 4wd stuff has been cool, but looking forward to getting back to the Bedford next week.
Woody, I have boos B plates on my NP Pajero since 2018 and they work really well.I did a heavy impact on the front corner 4x4ing and no damage to the Radiator or the intercooler,They are pretty tough and worth the $$.
The paj looks great, good onya woody. Love the fact you didn't go with some giant front bar, I far prefer most fourbys without a bar, and yours is no exception.
I was hanging out for a shed skid but all good, mabey next time haha
It's a Pajero please don't ask too much.
I always cut out the boots from the shocks, all they do is pick up mud and sand
Internal
Mloating
Siston
Makes perfect sense to me
That bit with the spring compressor and Al putting the nut on. That should have been the thumbnail.
I always smile when i see ya sprogs pop up in an ep. Love how you integrate them into the show 🙂
See ya sprogs 😂 wild lingo
CARNARVON GORGE !!! only a few hours north west of you
That stupid smirk while getting pulled in by the winch... Fantastic :)
Sunday creek road is a good drive and go towards Jimna, Dave at the post office is a top bloke.
The off-road side of obi-obi will also get you some nice shots
Nice entrance Woody. I worked for Nissan and Toyota in Hervey bay so yeah I know all about sandy shitboxes.
Interesting intro. When Al said you need to pull your weight, I don't think that's what he meant. 😁
Lol, one swift move, and the sands of time fall to the ground.🇨🇦🤣
That intro was bloody golden!!!
Lights and lift looks nice woody, going for a dakar livery wrap too now? Haha. Fun fact for al, There acctualy is a pajero evolution! (dakar homologation road car). Those things look sick
Lol 😝 been there ,good luck
The Pajero is an absolute treat!!
Pajero is Spanish for wanker and this one really is.
Couple of observations:
1) If woody's crooked intercooler was crooked in the other direction, it would probably clear the free spool.
2) Can't you clock the motor unit on the winch so that the free spool lever is more toward the front?
The rear protect is often forgotten, and then the rear AC + pipes is smashed up...
Great that you got them all! 👍
Love the banter with the young fella.
ALL GLORY TO THE HYPNO TOAD.....
Do land cruiser mountain, perfect place to test woodies recovery skills of patrols
Had a winch for the first time on my last triton used it to pull down 3 trees (non native weeds) and rescue 5 mates never once used it to save myself. Was nice piece of mind for wheeling by yourself though.
Unless they're progressive rate springs the spring rate wont change and the lower spring perch will change the height but at the cost of less suspension travel.
Even on progressive springs preload doesn't change spring rate. At a given applied weight, a coil spring will compress to the same length regardless of preload. It just affects ride height and bump and droop travel.
That winch is gonna rip your number plate clean off in that position haha
He bolt on, he protec!
Woody I'm guessing you wanted specifically second hand air filter oil out of a ct110?
Only the best 👌🏻
Big Al. Get him to fit new Falken tyres ! They make all the aftermarket sizes for Mitsi's and throw those old rubbers in the bin before it ends up on the roof ? V.
Nice looking fellow!
Beau does good work.
Onya, fella 👍🔥
Those spots in the front bumper is pure genius! I’ve got an RX like yours. Hmmmmm.
Haha good stuff 👍🏻 Looking forward to the Bedford again too
Even the Australians know about the Carolina squat 😂
Best acronym
DNA (National Dyslexics Association)
Running creek camp ground just past woodford isn't bad and then take the bikes up the mountain track. Have fun! And take a fresh pair
I can't imagine living in a place where you can't get parts at 😢THAT SUCKS 👎much love from Detroit 👍 THANX Great video
My wife had one of these Pajeros, now she's got a Legacy GT. Both great vehicles, but I do miss the Pajero.
Nice work TSF crew, Mystery Beyond Music has jumped to over 2000 subscribers!
"What are ya doin' Woody!" 🤣
Nice to see Al flexing the show spanner
that coating under the Pajero is known as "SCHMUTZ'
He bolt on he protec!!!
Read the instructions! You can rotate the end of the winch. Clutch handle will often not fit, it's the normal thing to do. Anyway, love the customizations. Keep it up boys!
Neat touch from Dobbingsons
Nice pajevo lights
You're a role model for dads everywhere!
Great to see how you can get a nice off-road vehicle on a budget.
Dobinsons make top gear, have used their springs in an old rangie and in my prev GQs. A worthwhile upgrade by any measure. You’ll need some extra coin as mates who have had those paj’s reckon they drink like free beer going off at a wharfies picnic. 😳
The grommet has his day's smile.
Welcome back to the dobinsons/supercheap factory.
yes rural fire brigade🤣the daily for me
Good bit of gear the boos plates 👍
My Wednesday lunch time poo normally takes about 30mins,I swear the boss is onto me...
Every off road vehicle needs a good wench
I think the exception is desert runners, sure they can be useful but they're also heavy and on some vehicles really hinder radiator air flow
Is Al's son a better RUclipsr than AL?
Great upgrades 🤙👍
Always love watching your clips Al and Woody.
Im just about to get that exact lift kit for my pajero, good to see you guys are getting it. Keep up the great content.
Love watching you guys work on the Paj. I've pushed my fuel tank in on my NM Pajero. That bash plate kit looks the goods. Soon you will be out wheeling that PooTroll. Is that a Dirt Boy 4x4 winch cradle? You can use the winch to recover the PooTroll.
woody emptying the piggy bank on this bush pig lol .
Jesus, the amount of work needed just carry a few lemon squashes into the bush :-)
It like a off road channel, I reckon that bedford van going have a snorkel and swamp tyres next week lol .
I think it's the licence plate mounted crooked throwing off the look on the front end. Great job as usual lads looks awesome 👍
"He bolt on, he protecc" lol
Gentle violence ftw... Taaapy tap tap...
Thanks for the Friday morning laugh men 👍
Hey Woody. Mate, that winch is going to be great for pulling the POS up on car trailers after every outing. Highly convenient on sealed roads as well as off-road 🤣
What that get hot in the summer. The trouble with all that under protection is the heat struggles to get away. You might have to lift the bonnet at the rear to get the heat out of the engine bay.
Another beauty for the ones who work on cars. Farm utes on wet days, mud and manure dthat you catch with your face.
With Australia having so much bush and outback, where are the Aussie domestics SUVs?
Good point. Ford, GM, Toyota, and Mitsubishi all closed down their factories here. It's all imports now.
Apparently our labour is too expensive. I just got my latest bill from the plumber and can confirm this. I'm going into a coma now.
Ford and GM have never produced an offroad car here, they just held onto the idea that they would sell 5 seat sedans regardless of how badly designed and built they were. Then they disappeared. Here ends the lesson.
13:00 waiting for the spring compressors to fail and fire your manhood to the roof.
Best intro yet. That had me
Love that you show the struggles and
F. Ups.. Also, use the kids music!
Looks great
Subscribed to your sons channel. Great tunes, keep up the good work!
The xd barra looks cool
Yeh,
I rooted my paj fuel tank so bad it choked the pick up. had to punch it back out on the tracks hahaha bash plate is a great investment
I drive a J90 prado with all the flash junk on it. soon getting a new one. i think they're the perfect car for me. not to big, not to small and loves the sand. those jeros look good though. i never realised that they were decent. I'm glad they're getting some love
Good work!!!! Always make me laugh, get that young lad mowing!!! 13:50.
this video is a prime example of how exposure and marketing works! mention something or someone and tell people to go subscribe and you dont get fiddy, but about a thousand to go do it!:D that lil champ does however make cool tunes!;D
Do the Cobb n Co track(old Esk Rd) between Blackbutt and The Nanango Gold Diggings, its good fun. I did it last year in my Pootrol.
God yeah hipno toad Futurama trance synthwave
should let Alan drag the pajero up the cape with the patrol, keep up the great work guys
First water crossing that number plate is gonna come right off. Put a flip up number plate bracket on it. Their cheaper then a replacement number plate
Road trip to WA!
On some winches you can rotate the gearbox therefore moving the disengagement lever to the front should make it easier to turn.
0:00 that winch sounded like it was working hard
That intro was a crack up 😁