JBL BAR | 700 800 1000 How to Setup video
HTML-код
- Опубликовано: 8 фев 2025
- The JBL Bar 700, 800 and 1000 turn your movies, TV shows, and games into a breathtaking, immersive experience, enveloping you in a sphere of 3D surround sound. Learn how to connect them to Wi-fi and your TV in this tutorial video.
Thanks for the setup guide on these high-end sound bars. Personally, I like the JBL BAR 1000 more than the other models!
I bought JBL 800 Soundbar last month. The sound quality is amazing and the formats it supports are rich. I am quite satisfied with it until I found it will automatically go to sleep every 10 minutes. I use an eARC connection - I connected my Blueray Player, MacBook, and PS4 to the TV and then TV through eARC to the Soundbar.
The issue at hand is that the soundbar enters StandBy Mode every 9 minutes while I am watching films or listening to music. This will switch the TV Sound output to the TV speaker instead of the soundbar. This is not user-friendly, and as a result, I have had to purchase a robot finger to press the remote button every 9 minutes to ensure the continuity of sound and film. I believe that your product programmer could easily update the function to allow customers to decide whether the soundbar enters Standby Mode.
Rather than programming the internal chip of the soundbar, it would be more beneficial to program the remote or phone app controller to trigger the signal to enter Standby Mode. This would greatly improve the user experience for your customers, myself included.
Hi Calvin, please check the current Software version of your JBL Bar 800. Press and hold the [SOURCE] and [VOL- ] buttons on the Soundbar for 10 seconds. The version should be V22.34.55.80.00. If you need more help updating the software, please reach out to our Customer Support.
@@jbl I have already contacted regional customer service and was informed that the auto standby function of my JBL soundbar is an internal hardware preset and cannot be altered. However, I suggest that the JBL program developer add a function to the JBL ONE app or the Remote controller that sends a wake-up signal before the soundbar goes into standby mode every 10 minutes. This would address the issue of the soundbar going into standby mode while I am watching a movie, which is clearly a bug when using e-ARC Connection. While I understand that the soundbar should go to sleep if there is no signal being sent to it for 10 minutes, it doesn't make sense for it to do so while I'm actively using it. I am disappointed that JBL has such a high-quality product but hasn't addressed this minor defect that could easily be resolved through firmware or app updates by your programmers.
Hello. What formats supports the 800? The 800 has no dts codec. Only atmos. Is that a problem when I watch movies on ultra blu ray or netflix
@@Calvinkwan13 Having the same auto disconnect after 10 minutes with our 1,000 Bar. Wondering if you managed to resolve the issue with yours. Have been in touch with customer service and tried everything they've suggested but still got the same problem. They now want me to return the bar for them to diagnose but unable to tell me how long it will take them to do this. Not good enough @JBL.
@@jbl how do I update the software version please.
Just purchased the 1000 Soundbar, and this thing is AWESOME! But, on the rear speakers can they placed against a rear wall flush or do they need side tables so they don't sit flush against a rear wall?
I purchased Bar 800 last week. I connected it to my Nebula Cosmos 4k projector. Somehow, after connecting the soundbar to the projector, projector reboot itself every 8-10mins or sometime, projector kept rebooting continuesly. Once I disconnect the soundbar from the projector, the projector works normally. I tried both connecting soundbar with HDMI cable and Bluetooth, but the reboot occured in both scenarios.
How often should i charge the rear speakers...????
We really enjoy the JBL 1000 Soundbar.
How can I change Wi-Fi to a better signal?
Hai I Have 800 Pro can I place sub boofer in rear corner? it will effect any sound?
So Just got my jbl 1000 on an awesome Black Friday deal from Best Buy.. the question I have is.. should the unit disconnect in middle of movie ect..noticed after setting it up and watching a movie off of Netflix from TV app it randomly turns off? Not sure why.. I’m using supplied eARC HDMI cable that came with unit. Very annoying.. like happening randomly every 15-20 mins and I have to turn it back on.. also.. for Atmos.. or other Dolby versions is that a setting on system? My tv does support Atmos and other audio so does it produce normally or is there a setting?
@djgmix916 I'm having the same audio issue with the HDMI eARC. Sometimes audio comes back but usually just need to power down and reset everything.
Do you need to be in the seating position when calibrating or should the area between the rear speakers be clear? Also when doing the first step of calibration do the speakers need to be at ear level or on the level with the front bar?
Hi George, thanks for your inquiry. For sound calibration, please do the following:
• Make sure that your room is quiet;
• Make sure that the soundbar and the two detachable rear speakers are fully in sight of each other, without obstacles in between.
• Make sure that the left and right rear speakers are properly placed, the L speaker on the left and the R speaker on the right.
If you need more help, please contact our customer support.
When will get the 9.1 soundbar setup app?
Hi Dániel, thanks for your interest in our product. As of now, we do not have an app that is compatible with the JBL Bar 9.1.
Hallo, super happy of the soundbar 800 bought on Black Friday . Cannot hear sound from the subwoofer. Can I ask for your advice please ? Many thanks in advance
I have jbl 9.1 and possible to connect in jbl one app. Not able to find the wifi mode
Are you satisfied with 9.1?
I purchased the JBL 1000 soundbar recently. After calibration there is louder sound coming from the left rear speaker than the right rear speaker when detached. How do I fix this?
Hi Aarsh, Thanks for reaching out. We take this matter seriously, and we want to work closely with you so we can identify the root cause of this issue with your JBL Bar 1000. Please reach out to our customer support team for more help.
Hi there. Thanks for sharing. Do these detachable speakers need to be plugged in after being placed on the left and right sides of the viewing area? So how is the electricity need met? charging or plug?
They are battery powered and gets charged when they stay connected with soundbar + you could also charge them with C-type cable as C-port is provisioned in the detachable speakers or you could place them near sockets that can charge with typc-c adapters
Hello, can You add a buttons in the JBL One app to toogle SMART MODE OFF permanently and PureVoice OFF permanently? After standby they restart every time.
When does the Bar 1300 come out in Canada?
Hi there, thanks for your interest. We don't have news to share about when our JBL Bar 1300 will be available in Canada. You could sign up for the JBL Newsletter or continue following us for news and updates. bit.ly/3lL7pUK
I just recently bought the JBL Bar 800 and the sound is awesome but the only problem im encountering is that it's unable to connect to wifi, through the one app after putting in the wifi password.
When is this coming out for the US? This has been teased for months now, with a release date of 11/2022 however none have been released to US markets.
It's coming next month
@@cordcuttercam need official word from JBL
@@j.e9971 look up endgadget article , coming February 19th 2023
The new additions to the Bar Series ( JBL BAR 700|800|1000) will be available at jbl.com starting February 19, 2023.
@@jbl thank you!
Hello. The 800 has no dts codec. Only atmos. Is that a problem when I watch movies on ultra blu ray or netflix
Hi there, thanks for reaching out. The absence of a DTS codec on our JBL Bar 800 shouldn't be a significant issue for watching movies on Ultra HD Blu-ray or Netflix. Most content is available with various audio codecs, and the soundbar's support for Atmos should enhance your movie-watching experience. If you need more help, please reach out to our customer support.
Are these imax enhanced certified?
How long does the battery last on the wireless surround speakers for the 800 series before requiring recharging?
Hello Jonno, thanks for your inquiry. Our JBL Bar 800 detachable surround speaker's playtime is up to 10 hours. This may vary depending on volume and music content. If you need more help, please contact our customer support.
Is calibration absolutely necessary? I just received my JBL Bar 1000 in the mail and so I need to calibrate it or no? People have side calibrating makes the speakers more quiet more so with the rear speakers is this true for all the speakers in the JBL bar 1000 are they more quiet after calibration? Thanks for any tips.
@@firexallst4rz277 yeah you're right don't calibrate 😊 i just purchased jbl 1000 and its much better when you dont calibrate 😊
@@billylomibao3311 What if you already calibrated? How do you erase that setting?
@@okkin981 you need to full reset it by pressing the 3 buttons + - and source hold it until the screen of your jbl shows full reset
The trouble with these instructions is that the hardware and software do not do what it says they're supposed to do. I'm trying to use ARC hdmi but the only connections on both device are output. Neither has an ARC in, as far as I can see.
Arc is only suppose to be out
Just make sure it’s ARC on both devices (TV and Soundbar). Then go to Settings on your TV - go to the Audio sub menu - then select eARC as the default. Done. Should work.
The whole point of ARC is that it's bi-directional.
I have the JBL 1300. Should I rotate the rear speakers? Or leave at 0° ?
Hi there, thanks for reaching out. For best listening experience, we recommend rotating the rear speakers of your JBL Bar 1300 to 45 degrees.
my jbl bar 1000 subwoofer indicator light flashes white and orange when power on. it that normal?
have long dose battery last?
Hi Andraz, Thanks for your interest. Our JBL Bar 700, 800, and 1000 are not portable speakers and do not have a battery. It must be plugged into an outlet all the time.
No battery? How they last the 10 ours?
Sirve para jbl 900.1?
Hi can I connect the projector HDMI 1.4 direct to the soundbar?
JBL 800
HDMI standard input/output? 1.4 / 2.0 / 2.1?
Playstation5 --> Bar 800 --> TV
(PS5+TV+Cable are in HDMI 2.1 standard)
if I connect as above, does the TV display in 4K 120Hz?
These soundbars says it "works with hey google" is there an active listening microphone in the soundbar that you can command with "hey google" or does this mean it only respond if contacted by other google assistant devices?
Good work, I own jbl bar 1000. The problem is that I am making the jbl one application as you did, but I could not connect in any way. I tried resetting it, the product appears in one application, it says connection is provided. Then the application says wait 20 seconds on it, nothing has changed. I waited half an hour. Tried more than once, no results. I would be glad if you help. It is very sad that your brand, which is so popular in Turkey, is not in the language of the country and there is no Turkish content for the products.
Hi Onur, thanks for reaching out. To further assist and provide the right information, please reach out to our customer support in Turkey here:
Aztek Teknoloji A.Ş.
2.Söltaş Evleri Hare Sok. No:1
Levent, 34330 Istanbul, TURKIYE
Tel: +90-212-279-8889
Fax: +90-212-279-8890
www.aztekteknoloji.com
Tam 1 saattir wifi ile bağlanmayı denedim ama bağlantı kurulamıyor. Jbl bar 800
Hello , I have purchased the bar 800 and its connected to my TV in the HDMI EARC input. The problem is that every 10 minutes the bar goes to standby mode . This is really annoying. Could you please tell me how to fix this issue ??? Thanks
Just bought JBL Bar 800. Are the rear speakers(detached) supposed to be very quiet? Calibrated but I can barely hear anything from it when watching with Dolby atmos.
Thanks for reaching out. The detachable speakers of our JBL Bar 800 are relatively quieter than the main drivers on the soundbar when unmounted or detached. It is because the speakers primarily produce ambient sounds and surround sound effects, such as crowd noise, background music, and other surround sound effects from the content that enhances your overall audio experience. It also varies depending on the content playing from your source, particularly for some content where there are significant ambient sounds.
I bought this jbl bar 1300 but why this model sound and bass is not so good as previous model. I sold it with huge discounts.
Someone know how to active the music mode?
I had the JBL BAR 5.1 with these mode.
But now I have this new sound bar JBL BAR 1000, when I listen music the both speaker doesn’t listen fine 😟
Help me 🙏🏻
verification does not recognize sound bar when I press the tone button
Hi David, thanks for reaching out. We're here to help. We'd like to know more about the issue of your soundbar to further isolate the issue. Please contact JBL Customer Support so we can assist you.
Thank you for your reply. I was able to get it to connect.
Can someone help me which one to buy between 9.1 and 800 with the same price?
When will JBL bar 700 be available in India..??
Hi Gaurav, thanks for your interest. For pricing and availability of our JBL Bar 700, please visit our official site in India here: in.jbl.com/
Recently I bought jbl800 all are working fine but Left side speaker no sound updated software but no use calibration done then also not useful only white light showing continuous in the speaker
Hi Ram, thanks for reaching out. Our JBL Bar 800 is an exclusive product released in selected regions. To further assist you and provide the right information, please use our country locator and choose your location to be routed to our official website for your area. bit.ly/3gmApTc
How can i connect to the TV when arc is pluged in it not works for me
Hi Jules, we'd like to work with you directly to help you set up your unit. Please contact our customer support via our official website or toll-free hotline. We're here to help.
I got mine last week, but it’s really annoying that I can only use the SB on bluetooth mode only, if I use the eARC HDMI didn’t sound, tried to reset but didn’t work, tried to enter wifi settings and doesn’t work, this is so annoying and sometimes the sub disconnects and then reconnects to the SB, I’m very disappointed bc I have a good experience with the brand, but bc of this Im not going to get more devices from JBL
I bought JBL bar 800 but my tv doesn’t have HDMI ARC. I tried to connect with existing HDMI port but it’s not working. How to connect bar 800 to tv?
Hi Abhishek, Thanks for reaching out. Our JBL Bar 800 can be connected to your TV by using an optical cable (sold separately) if your TV doesn’t have HDMI ARC. If you need help setting up your soundbar, please reach out to our customer support. We're here to help.
Hello, I bought the JBL 800 Soundbar but it seems like it requires wifi, what I don't have. Can I just collect it to Bluetooth? And how exactly do I do that?
Hi Marie, thanks for your inquiry. Our JBL Bar 800 does not require a WiFi setup for the device to function. To connect via Bluetooth, you'll need to put your soundbar into pairing mode by pressing the Source button on the soundbar or the Bluetooth button on the remote. If you need more help, please check our country selector page to be routed to our local website here: www.jbl.com/countryselector
Be cool if it didn't say checking for firmware that may take 20 seconds. Tried starting over after 20 min
Bonjour,
Comment l'ajouter sur Alexa?
Merci.
السعر
Surprised this doesn’t have rca or aux capability. Will limit compatibility to a fair few slightly older tv’s
The constant charging of read speakers is a pain , there must be a better way.
Terrible directions for setting up the bar 700 !!
Worst instructions ever. Ive installed Imax setups at multiple theaters. And this soundbar app is more confusing and crappy then those very high end systems 😊
The instructions seem pretty clear to me. I don't know about you but good luck.
Instructions couldn’t be more simple to be honest. I don’t know where you’re having problems?😅
This seems very difficult for a home room theatre
My jbl bar 1000 keeps disconnecting from my TV. I've setup accordingly, but sometimes when I turn on the TV, it has disconnected from the speakers and I have to unplug everything and plug it back in for it to work, any ideas?
Mine is doing same thing.. did you ever get a fix? I’m using supplied hdmi cable that came with the unit, maybe it’s bad? Idk.. I’m using eARC from tv and into soundbar