Abstract Speech Visualisation - TouchDesigner Tutorial 45
HTML-код
- Опубликовано: 6 июл 2024
- In this TouchDesigner tutorial we're learning how to use the Audio Spectrum in a slighty modified way to more accurately display all the frequencies.
-----
00:00 Intro / Overview
00:50 Setup
01:43 Audio Spectrum
02:43 Maths, Trimming & Resampling
04:33 Instancing Setup
07:00 Positioning & Scaling
09:24 Displacement
10:47 Feedback
13:37 Post Movement
15:34 Additonal Stuff
17:32 Outro
-----
Files, exclusive content and more:
/ elekktronaut
Special thanks to: 480 Productions, Abigail, Acid Johnny, Adam Scheirman, Ai Soon, Alex Coman, Andrea Civati, Andrei N, Andrew Edman, Annie Yang, Arety Araya, Austin Paxton, Austin Taylor, Bendeform, Berke Yapa, Billy Tegethoff, Bizzy Smith, Bjarl Azerbaijan, Bob Householder, Brianna Laia, Byron Dickey, Cameron , Carolina Morales, Charlie Williams, Chris, Christian , Chung Cho, Corbin Davis, Craig Pickard, Crystal Jow, DJARUM , DaFF aka David SALAUN, Daniel Clarke, Daniel Kass, Danny , David Leroy, Derek Szeto, Diana Derii, Diego Chavez, Digital FUN, Digital Gastronomy, Dita Zanelli, Dmitry Nadein, Dorothée Dinne, Drasko V, Eric Chang, Essidy, Ezra Ranz, Federico Rusconi , Francisco Bucknor, Function Store, Gabriel Pais, Giovanni Iacovella, Greg, Harald Pliessnig, Heavyhearted, Helin Ulas, HoloHolo, Hyeong Gu Kim, Inna Sh, Irfan Brkovic, JEONGMIN PARK, Jason Batcheller, Jay Winder, Jean Clark, Jeanne Pollock, Jeppe Vinum, Jochen, John C, John-Michael Schaub, JohnDoh, Jonathan Tolentino, Jorge Sánchez Alejo, José Agustín Gonzalez Scarpa, Julia Ballmann, Junichiro Deguchi, Kai Erlenbusch, Kelsie Hoffman, Kent McDonald, LaJuné McMillian, Leo Torres, Lloyd Marsden, Lora Shopova, Lotto Andrea Carlotto, Low Rez Lab, Lucas Räthel, Madeline, Make Mistakes, Manny, Marcin Mann, Margarita Govedarska, Mario Paler, Masayuki Azegami, Matt Dakers, Maxalex , Maxwell Crabill, Melanie.lfc, Michael, Michael Tan, Miguel , Mike, Mike Pastore, Milkorva, Milo Hayden, Moon Hung, Morfeo, Nathan Hicks, Nicole Escalante, Nix , Omar Garcia, Paola, Phelan Kane, Péron Yann, R Tyler McLaughlin, RYON RYON, Randell Lamontagne, Rob , Roberto Mucchiut, Russell Mishler, Ryan, Sacha Safretti, Santiago Nahum, Sean Ephram, Sean Leo, Sergey Korneev, Shana Smith, Shimmy, Sky Ainsbury, Steve Casey, SunJeong Hwang, Sungheuk Jung, Sunny Liao, Sylvain Després, Tensnake, Teruhisa , Thomas Rosser, Tinewewo, Tjeerd Paul Jacobs, Tmdjn YhN, TomatoHeadchup, Tosca Teran, Tyler Neyland, Vlad Hurzhii, Yeah, Zeemen Zhou, Zero Alpha Design Co, antithug, archy , bhongbhong, carl runk, cd, claudio leggieri, david robert, dwuu, fxsan, graziano de vecchis, guillaume Bourassa, guojian , hans mortelmans, hsu piebee, hyunkyu ahn, im_pakt , ji jiji, kint, martin houra, martin kern, oshima toshiyuki, seanthefrotographer , tasso treis, technolo-g , vacuum , vitkorlin , yaron erkin, zia, zoen, zufallsgeneriert_, 一真 高田, 威 刘, 岳夫 宇田川, 梓 佐藤, 동훈 이, 욱쓰 유
If you have any questions, feel free to ask.
IG: @elekktronaut
/ elekktronaut
a very beautiful and elegant visualization! Amazing tutorial! thanks bileam
MASSIVE !!!!! , use this as texture for a 3d object, or to draw part of noise and making particles out of it. The audio Analyse you made is damn good!!! Thanks
Thank you so much for making such a daunting program seem approachable to a DIYer artist! Killer walkthrough!
Super amazing work!
Really cool. Fun to sing into this one and watch it paint the screen.
you are great man! I am learning so much from you. thanks a lot !
Brilliant work again Bileam 🙂
ah I wait for it so long! Thank you!!!
thank you! really awesome tutorial!
Very nice, thanks for sharing !
amazing work bro
Great tut. easy to follow..tnxs
thanks for sharing!
tnx a lot. slow, with mus and tasts kliks, with explaytions. Respect!!!!
So nice!
amazing!
awesome!
Thanks Bil, keep up the awesome work! I have an unrelated TD question if i may bother you
great!
This is awesome! Do you know how to do two sound inputs, like two microphones to have two visualization on the same system?
this is really fun and grateful for making it. Would you know or be able to point me to some fundamentals in how to properly treat and transform audio signals into usable data when converting ChopTo ? I know you make changes to the parameters based on your knowledge and experience and would like to learn more about the reason behind and then best practices. Thank you
hello!
I have a question, where can I find how to do the "Interaction display"?
thanks!!!
derivative.ca/community-post/asset/interaction-display-free-tox-%E2%80%93-keypress-mouse-press-etc/65107
here you go:)
Hello! I really enjoyed your awesome tutorial. 'Interaction display' was on Custom Palette. So, is it for Patrons?
No it's publicly available, here you go!
derivative.ca/community-post/asset/interaction-display-free-tox-%E2%80%93-keypress-mouse-press-etc/65107
@@elekktronaut Thank you! You R the Man!!
what if I cannot find anything for my components?
From the very initial point, my audio chops are all visually red and yellow lines in comparison to your singular purple line. Could this be a different in settings?
Yup just check your TD preferences for Chops :)
@@elekktronaut thank you always for replying to comments 🙏
How did you change the color of audiospect to red and math to orange? And more important question: how can I make the reaction more sensitive to the sound? I'm working with breathing and it would be cool if the visuals were more visible - reacting even to the slightest sound. Thanks :)
Hey there! You can open a little color palette in the under left corner by pressing "c" on the keyboard. You can then change the color of an operator by selecting it and then choosing a color on the color palette.
Regarding the sensitiveness to sound input, I've recently tried something similar by trying to record my heartbeat. What you can try is to amplify your sound so that the amplitude is around 1 and -1. You can do that by attaching after your audioFileIn or audioDeviceIn an audioDynamics operator. There you need to set the inputGain to something high until you are able to pick up the breathing. If now your sound input clips/peaks you can also activate there a compressor and a limiter and mess a bit with the settings.
I would also advise you to add an AudioFilter before or after the audioDynamics in order to filter out noise or frequencies you don't want to pick up.
Wish you luck in your endeavours o/
@@Owapawa thank you so much for your response, I will try it out :)
Great tutorial, I might use this for a student-presentation, if your ok with this?
Can you help me...
I really need this for my presentation ..but i really don't know how to do it from scratch 😭
Can someone help me to export the file in the mp 4 format?
I am new to this software.
How can I make circles appear on lower frequencies ? In my case they only react on very high ones ;(
add an audio EQ right at the beginning of your audio chain and filter out the frequency you dont want to effect the rest of the chain
How would you add this to an audio file and not in mic
How to keep making it grow and build up instead of disappearing parts one by one?
Can I do it on the free version?
Hey, at 8:57 as soon as I'm attaching scale and enabling r for X, the geo has an error as "All OPs must generate same number of instances" Please help.
Have you changed the output resolution of any ops? Make sure all of them say "use input"
@@curls6778 I've tried checking all the 'use inputs' on operators but still having the same trouble
bro how do I export these spectrums without degrading its quality aagh its so tough
Hey, Just finding this now and trying it out. Everything works as expected until the 4:35 mark when I add a CHOPtoTOP. I see no output in the TOP. It's just blank. I can see the 30 samples in the NULL right before from the audio input. Is there a setting missing or something?
im with the same problem
I changed the multiply settings to a higher number in the math CHOPs and it worked for me. Freaked me out at first as well😢
My shapes do not move around like yours, They stay fixed all the time
Can someone please do like this to my audio file 🥺
can this be just like, downloaded as a template?
Can we ?
Hey Bileam, thanks for putting all these tutorials out here.
Which TD-license did you buy?
The parameters of my resample Chop aren't scalable. I am currently using the non-commercial version of Touchdesigner.
What do you mean aren't scalable? That doesn't have anything to do with the license. I'm using both the free and commercial. Maybe you forgot to turn off time slice?
Problem solved. I turned the time slicing off. now it works. Watching step by step carefully helps a lot.
@@7cd664 Glad to hear :)
awesome!