I just bought it 1 day ago and realized this is much harder than I anticipated Thanks a lot for all your effort in recording these videos It's a shame Nektar itself delivers a shallow User Guide that is only good for engineers working in Nektar, not the general public I bought it for 2 reasons: * Control Bias FX 2 (change preset, control any device in my signal like amps, pedals, wah..etc) * Control recording/playback on Apple Logic Pro Before finding your videos, took me whole day to figure things out. I started configuring commands on the device following the manual. Then the software engineer spirit (since it's my profession) went like "there has to be a desktop app to adjust all this instead on the device" and boom found the webpage then found your videos I wanted to write this comment to thank you in person @brandon
Glad it was helpful. I think the integration with Logic and GarageBand is great after you install Nektar's patch. I've not used it with the FX 2 but hope you'll post some footage! Be sure to check out the material here for more stuff on Pacer: sound-economix.com/nektar-pacer/ I've also started a FaceBook group where we can all share ideas: facebook.com/groups/807997936716567
@@korayem Actually Morningstar does a good job of describing the relevant MIDI for folks like us: www.morningstarfx.com/post/2015-11-18-the-beginners-guide-to-midi Yes, I think using Francois' editor that way is very helpful. I had to do that to get some preset advances to work for me. thanks for joining the FB group. Hopefully we'll get some people there and help each other out.
Ditto on Korayem comments about Nektar, and thank you for your excellent setup guide. I am wondering if once you have your Pacer and DAW operating, If you turn off your Pacer ( to simulate a power failure), and turn it back on does your Pacer and DAW remain operational (that is, reconnect and allow the Pacer to control the DAW)? Thank you in advance, and thanks for super info.
Hey Brandon, I really appreciate your explanations here. Just wanted to mention that the page on your website regarding setup for the pacer and ableton appears to be down at the moment.
I am enjoying your videos. I just got a Netar Pacer and have it working with Logic Pro tracks and transport just fine. How would I use the Pacer to toggle the tuner on and off?
Hello! I'm considering buying this. My intention is using it as an ableton session view and guitar controller(now with a plugin, bias fx, and eventually with an external amp modeller) in live performances. Would you recommend it for that? Thank you!
Esteban Granados yes it’s very versatile and can even control some amps with factory patches. It doesn’t have great ableton integration but there are some workarounds for that. Check out my webpage and I promise to get a tutorial out on that soon.
Hi, I bought a pager and I'm having a really hard day. I think it's too hard for beginners to use. But I'm learning a lot from your channel. But all BCS Presets for Nektar Pager on your homepage didn't download. It says it's in your trash can. Could you please raise the All BCS Presets for Nektar Pacer again?
Hi. I just checked from 2 computers and it was working fine for me. Can you try this link: drive.google.com/file/d/1aFn0GII98hDrYVNRR-14KA9wcnLWRi7L/view ?
![Nectar Pacer Programming: Ableton Live [Tutorial 1] (2019)](http://i.ytimg.com/vi/UYMQAJRR3ls/mqdefault.jpg)
![Nectar Pacer Programming: Ableton Live [Tutorial 1] (2019)](/img/tr.png)
I just bought it 1 day ago and realized this is much harder than I anticipated
Thanks a lot for all your effort in recording these videos
It's a shame Nektar itself delivers a shallow User Guide that is only good for engineers working in Nektar, not the general public
I bought it for 2 reasons:
* Control Bias FX 2 (change preset, control any device in my signal like amps, pedals, wah..etc)
* Control recording/playback on Apple Logic Pro
Before finding your videos, took me whole day to figure things out. I started configuring commands on the device following the manual. Then the software engineer spirit (since it's my profession) went like "there has to be a desktop app to adjust all this instead on the device" and boom found the webpage then found your videos
I wanted to write this comment to thank you in person @brandon
Glad it was helpful. I think the integration with Logic and GarageBand is great after you install Nektar's patch.
I've not used it with the FX 2 but hope you'll post some footage!
Be sure to check out the material here for more stuff on Pacer: sound-economix.com/nektar-pacer/
I've also started a FaceBook group where we can all share ideas: facebook.com/groups/807997936716567
@@BrandonShawCleave Joined the group on FB
@@korayem Actually Morningstar does a good job of describing the relevant MIDI for folks like us:
www.morningstarfx.com/post/2015-11-18-the-beginners-guide-to-midi
Yes, I think using Francois' editor that way is very helpful. I had to do that to get some preset advances to work for me.
thanks for joining the FB group. Hopefully we'll get some people there and help each other out.
@@BrandonShawCleave are you serious ... nectar pacer is shit ... who are you ? nectar representive ? can you see somene a representive of nectar ??
Ditto on Korayem comments about Nektar, and thank you for your excellent setup guide. I am wondering if once you have your Pacer and DAW operating, If you turn off your Pacer ( to simulate a power failure), and turn it back on does your Pacer and DAW remain operational (that is, reconnect and allow the Pacer to control the DAW)? Thank you in advance, and thanks for super info.
Hey Brandon, I really appreciate your explanations here. Just wanted to mention that the page on your website regarding setup for the pacer and ableton appears to be down at the moment.
Hey, I have moved it to sound-economix.com/pacer-ableton/. Sorry that the redirect wasn't working.
I am enjoying your videos. I just got a Netar Pacer and have it working with Logic Pro tracks and transport just fine. How would I use the Pacer to toggle the tuner on and off?
Hi! any special setup is needed to use Pacer with Logic Pro?
Hello! I'm considering buying this. My intention is using it as an ableton session view and guitar controller(now with a plugin, bias fx, and eventually with an external amp modeller) in live performances. Would you recommend it for that?
Thank you!
Esteban Granados yes it’s very versatile and can even control some amps with factory patches. It doesn’t have great ableton integration but there are some workarounds for that. Check out my webpage and I promise to get a tutorial out on that soon.
it has no support ... very complicated
can you please update your Website , I'm unable to find it !
Hi, I bought a pager and I'm having a really hard day. I think it's too hard for beginners to use. But I'm learning a lot from your channel. But all BCS Presets for Nektar Pager on your homepage didn't download. It says it's in your trash can. Could you please raise the All BCS Presets for Nektar Pacer again?
Hi. I just checked from 2 computers and it was working fine for me. Can you try this link: drive.google.com/file/d/1aFn0GII98hDrYVNRR-14KA9wcnLWRi7L/view ?
@@BrandonShawCleave FYI I had the same issue from your website, the link above worked though! Thank you!!
I can't get my on color to stay on. It shows the selected colour momentarily. Any ideas?
I imagine it's getting 2 messages: one turns it on, and the next off. Make sure you don't have the incoming info set to toggle.