Do you have this one where you're talking and walking us through the steps you're taking. I like those better and I think this would be a nice one to learn from
haha in 8th grade had metalshop class project was to make a chisel. teacher tested it and said wow that worked great. cut the band wire.but, it was ugly as sin so only got a B fun memory!
@@JPsBladeworksASMR Like maybe a sword or an axe? Personally I think it's best to step out of your comfort zone with your work occasionally. I would love to see a piece fusing two drastically different patterns together.
Hey ... @ 11:34 when you score a center line (I don't know if that's the name for it, but I hope you know what I mean) it looks totally angled and wrong.... IDK if it's the camera angle or something but on the right side it starts off HIGHER then where it ends on the left side.... Like the left side looks liek the correct CENTER, but the right side looks WAY YOO HIGH..... maybe it's just me 🤷♂
Itd the angle and the wood its self isnt square to the rest of the knife. A little deviation can make the wood angle a lot tip to end. Thats why i it looks to be at an angle. So i do the center line based off the knife then i space my handle taper based on that center line.
I'm wondering now...copper coated BB's are steel core..and with what you just did.. there would be small stripes of copper in the Damascus...would love to see... Love your knives and very worth the subscription...keep making vids..I love this
Love the blade love the handle but you needed mechanical device to hold handle to the blade the epoxy will break down or crack if you use it for chopping it makes the handle you need at least two pins or 1 pin just for a little extra security
So I've seen you use WD-40 in place of Borax... is it any cheaper to use WD-40? I know it's easier..... much MUCH EASIER.... nut how do the costs compare AND how do the results compare too?
Not sure the cost comparison. Its pretty much the same. I can get both relatively cheap. All i know is i can sprinkle borax on hot metal. Cant say the same about wd40. I mean i can but it wouldnt be smart 😅
This is my asmr channel. The other channel is my voice over channel. The voice over will continue on sundays. Once i run out of my back log of these videos they will also have a set weekly day.
Great Work!! Awesome Blade and Handle 👍
Thanks 👍
Great work dude 👍👍
Absolutely, beautiful, awesome craftsmanship. I love that design
Thank you
Have you ever made a knife out of the pieces you take from your knifes ?
That is one of the slickest handles I've seen
Thanks
Another quality knife and I’m loving the contrast on the handle
Thank you
Those bearings turned out great with the twist
Thanks
Do you have this one where you're talking and walking us through the steps you're taking. I like those better and I think this would be a nice one to learn from
Sweet pattern and handle. It would make nice butchers knife.❤
Thanks
beautiful pattern on the steel.
Thanks
Beautiful knive, I really like the handle
Thank you
Very nice knife. I really like that one.
Thanks
Love to get some chisels from u!!!!! Damascus of course!!!
Ive never made chisels but sounds fun to try
haha in 8th grade had metalshop class project was to make a chisel. teacher tested it and said wow that worked great. cut the band wire.but, it was ugly as sin so only got a B fun memory!
Awesome video and beautiful knife as always man! I would love to see you make some bigger projects than just chef knives!
Such as?
@@JPsBladeworksASMR
Like maybe a sword or an axe? Personally I think it's best to step out of your comfort zone with your work occasionally. I would love to see a piece fusing two drastically different patterns together.
Hey ... @ 11:34 when you score a center line (I don't know if that's the name for it, but I hope you know what I mean) it looks totally angled and wrong.... IDK if it's the camera angle or something but on the right side it starts off HIGHER then where it ends on the left side.... Like the left side looks liek the correct CENTER, but the right side looks WAY YOO HIGH..... maybe it's just me 🤷♂
Itd the angle and the wood its self isnt square to the rest of the knife. A little deviation can make the wood angle a lot tip to end. Thats why i it looks to be at an angle. So i do the center line based off the knife then i space my handle taper based on that center line.
Beautiful blade. Curious if you pin handles? I usually do but I’ve never had one come loose when I don’t, I just hear about it or see it on tv.
Nice
That turned out nice. Love the pattern. I think I would put a pin in the handle if I was to use it to chop anything.
Epoxy is plenty strong in my opinion
is the handle fiberglass? really looks great.
No its a stabilized wood
I'm wondering now...copper coated BB's are steel core..and with what you just did.. there would be small stripes of copper in the Damascus...would love to see...
Love your knives and very worth the subscription...keep making vids..I love this
Ill have to get my hands on some to give them a try.
Nice cleaver. Handle looks great.
What does twisting the hot metal do in the process
I believe it distorts the pattern and spreads it all out.
Gives it the look by distorting the pattern.
She's a beaut JP.
Thanks
Looks divine !!!! What’s something like that baby worth?
Not sure. Couple hundred. Its been a while since i made it. I dont remember how much time it took me to make.
That came out really nice. The Damascus pattern is beautiful. Did you end up selling this knife? And how much would you sell a knife like that for?
A couple hundred dollars.
Holy crap!
😅
No grinding. Wow. And beautiful. Do you do commissions?
Nope sorry i dont
@ I saw I can get this literal knife on your site. Tempted. This can replace a chefs knife as primary tool?
Nice, keep all the cut off small pc and forge those into a small knife also...
Ill have to keep that in mind
Vários videos seus a caixa sai na prensa... isso é muito legal.
Thanks
Love the blade love the handle but you needed mechanical device to hold handle to the blade the epoxy will break down or crack if you use it for chopping it makes the handle you need at least two pins or 1 pin just for a little extra security
I havent had any issues with just epoxy. I never use pins on hidden tang knives. I just do notches and call it a day
👍👍👍
🫡
So I've seen you use WD-40 in place of Borax... is it any cheaper to use WD-40? I know it's easier..... much MUCH EASIER.... nut how do the costs compare AND how do the results compare too?
Not sure the cost comparison. Its pretty much the same. I can get both relatively cheap. All i know is i can sprinkle borax on hot metal. Cant say the same about wd40. I mean i can but it wouldnt be smart 😅
What happened with the voice over, I like hearing why you go in certain directions etc lol
This is my asmr channel. The other channel is my voice over channel. The voice over will continue on sundays. Once i run out of my back log of these videos they will also have a set weekly day.
Would like to hear you describe a little now and again.
Primeiro corte faiou kkkk
turns volume off for perfect amsr expirence.. dude theres nothing soothing about the sound of that press
I cant please everyone
subbed
I appreciate it