Long Crank/Crank No Start on a 2014 Nissan Altima 2.5L. (Very Odd Failure!!)
HTML-код
- Опубликовано: 5 авг 2024
- In this video we go into detail on how we diagnosed a long crank on a 2014 Nissan Altima. Watch till the end, this was a very odd failure!
All of the diagnostic tools used in this video can be purchased at www.autotesttools.com
Don't forget to follow us on:
Facebook: / autoaidetech. .
Instagram: / autoaide
Website: www.autoaide.ca
Twitter: @autoaidetech
Follow this link to be added to our email to receive the latest news and webinar information
form.jotform.com/201346646227252
#autotesttools #autoaide #diagnostics #vehiclediagnostics #diagnosticservices #technicaltraining #automotivetraining #diagnostictools #testtools #technicalservices #autel #pico #picoscope #trainingvideos 
Авто/Мото
Great video Mark keep em coming good stuff
Subbed! Nice video and very clearly explained!
Interesting that injector and ignition coil signals didn't drop at least at that capture. Love yours videos, not to long but with lot of information👍
Thanks for sharing
Hi good work ..keep it up.
My 2006 Nissan Altima at cold Start it start right away but when engine hot it take a few seconds to start. 4 seconds or so?
Do you have part number for that cam sensor
What was the solution??
Having the same issue
I'm having a similar or the same issue with my 18 but haven't been able to test it w/odb2 yet. Was that cam sensor a cheap fix and or would you recommend just swapping it out for a new one
Sensor was cheap enough that you could have swapped it out as a means of testing
Nice work. Did a shop call you to diag that?
Yes we on,ly do work for other shops
Have a 2013 Nissan Altima with long/hard starts. Mech says it is Cam/ or Crank sensor.... but he believes if you replace one or both you need to "reprogram" the car at dealership.....Is this true....Thanks Dan
Hi Dan. Generally, if only replacing sensor(s), there's no need for a reprogram. If your Altima is a 2.5 four cylinder, it would be a good idea to replace both cam and crank sensors together to avoid future reliability issues in that area. Good Luck!
Nice one . Looking foward to more diagnostic videos.
i guess I'm kinda off topic but do anyone know a good place to stream newly released movies online ?
@Silas Brooks I dunno atm I've been using flixportal. Just search on google after it :D -leon
@Leon Allan thank you, I went there and it seems like a nice service :D I really appreciate it!!
@Silas Brooks Glad I could help :D
Mine is doing the same thing but the mechanic said it wasn't giving any codes
Mine too- what was the solution?
Hi there! So glad I found your video. My 2014 Altima is doing the EXACT same thing.
The dealership Says that it isn't giving them any codes but they are thinking it's either the cam or crank sensor.
Should I just replace both?
Same thing with my 14 altima; no codes either. replaced both cam and crank sensors and it is still the same!! If not worse.
@@tammysmith8545 Had the same symptoms on 2013 2.5 SV. Dealer was useless in diagnosing; kept saying battery, air filter, starter, all of which I knew were fine. Would crank fine but long and sometimes stumble at startup then run perfect otherwise. Eventually did throw a code (only one in the 100k miles we had the car for) for something like low idle airflow. That lead me to check the MAF, also fine and clean, and then the electronic throttle body. I found the throttle body had a layer of oily residue (normal to have some accumulate over time from PCV system) all around the inside bore. This was causing the throttle plate to still seal closed even when the computer stepped it open a little bit for startup, and not letting the engine get enough air to start.
Easy fix: Remove airhose from filterbox to throttlebody, gently open throttleplate with fingers (and don't drop anything in it!), wipe all around throttle bore with a clean rag removing all oily residue as far back as you can reach, reassemble. You might even be able to just use a throttle body spray cleaner, but would have a hard time getting it as clean.
I have the same symptoms with a P0171 code. Could it still be the same problem?
Did you ever find out the issue? I have the same code
@Eric Mogor No, ended up just selling it.
Vehicle having the same symptoms but is throwing a P0420 code. Thoughts?
P0420 is a cat code
O2 sensor
Same problem with mine but only after sitting hot for a half hour or more. When cold, starts right up. Just going to replace my 2 cam sensors and see if it fixes it.
I have the same problem did it fix it? I replaced both of them still doing the same things.
@@Catholic1391 few more things to check. I am going to replace the engine coolent sensor. Then the oil temp sensor. I know I am getting gas pressure so the furl pump should be okay. Mine is in storage until May so right now I cant do anything. Last resort is I will go to the dealer. Luckaly the shop foreman at the Nissan dearler works on all the 370zs in my area. I dont have an expensive scanner to track down the problems. What year is yours and how many miles?
It looks like there is two cam sensors in mine. Is that right?
my 2014 had 2. Replaced both along with the crank sensor and STILL doing it!
@@tammysmith8545have you fixed the issue yet?
Any fixes?
Engine Camshaft Position Actuator. Valve SOLE. Valve VTC Oil Control.
Replaced all 3 then had to update computer at dealers. All in approx $600
@@gilly2571 Sorry if I misunderstood, but it was the 2 sensors, the 3 solenoids, and the 1 solenoid valve?