For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
can you do a tutorial on how to get to the "OS type cus iv looked all over yt and cant find it and i went in bios and still cant find it idk where it is and yes im in advanced bios under boot any tips?
it worked as far as the Driver setup is concerned. closed and reopened to 1000 and 1. No error or anything. But i ran a github gamepadla polling test and still getting default 125hz and 8-9ms latency
for everyone getting the error on filtering: "!!! Warning 2 - you SHALL disable Secure Boot or modify the Registry accordingly to enable loading of Microsoft unsigned drivers to load HIDUSBF driver successfully under Windows 10 x64 version 1607 (Anniversary Update) or newer versions." Need to tinker with BIOS which is what most tutorials are saying for disabling Secure Boot.
Thanks!!! A help for all receive the 577 error msg: 1. Click restart computer when holding down “shift” 2. You’ll get a menu pop up go > press Troubleshooting > Advanced options > Startup Settings and click the Restart button 3. When pc restarts you'll see a list of options. Press F7 on your keyboard to select "Disable driver signature enforcement" 4. Pc will restart and after all these steps it will work!
I works for the 1ms on the controller but now i can‘t start most games because anti-cheat Software won‘t work if you have driver signature enforcement disabled
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
Thanks a million for this i play apex and my lb and rb burtton is used for ult and tactical. I have had so many times where the roller was outright unresponsive and processed my commands too damn late.
xbox controllers can’t be overclocked the polling rate is locked. the elite gets about 8ms before and after the overclocking though it is more consistent. PS controllers can be overclocked to below 1ms.
Dumb question but just for full clarity once you have overclocked the xbox elite controller does it need to remain plugged into the PC or can you play wirelessly with the same input time?
So you can't do this and then play on a console and it work then right? The overclock is not actually installed into the controller, it's on the computer right?
I still feel it has input lag with my Elite 2 I feel less input latency on my Xbox Series X than my PC. ( PC w/ Cable - XSX w/ Bluetooth) I changed my pc 3 months ago with a better motherboard than what I had and it still feels as slow. So I think the DLI Bluetooth Technology on the Xbox Series X is still faster than the regular plugged cable on Pc.
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
I get an error. It’s pretty long but it says “error trying to test loading of filter service: 577 windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file tat is signed incorrectly or damaged or that might be malicious software from an unknown source” etc. what should I do?
What I would do is delete the whole file you installed and redo the process and make sure it has installed onto your PC correctly & see how you go from there
For the 577 error you need to make sure the secure boot option is disabled for your PC The first and only thing that you really need to do is to disable Secure Boot (or make some Registry setting equals to disabling Secure Boot). This is what readme recommends.
I tried overclocking my Xbox controller with the hidusbf and works but when i check my controller polling rate with X-input Test, it is still at 125hz(7-8ms) not actually 1000hz(0-1ms). Is there a way to change or fix this?
Anyone experiencing 570 ERROR or the device is going RED, Do these steps to fix it. Click restart computer when holding down “shift” and “down arrow” You NEED to disable something for this to work, You’ll get a menu pop up go Troubleshooting Advanced Startup and click restart You want to disable number 7 after disabling this it should work. Let me know how you go 😁 This worked great for me 👌
I’ve tried this and tested it with the elite v2 but I doesn’t actually go to 1ms I used the xinput tester and it says it’s still 7ms could u test ur controller on the xinput tester to show that it’s actually 1ms?
Nope the only controllers that truly go to 1 ms are the ps5 controllers. The A fusion pro is the only xbox controller that can hit 4ms. All others are 7+ms
Anyone else having an issue where they can’t program your buttons on your elite controller after your installed the service. My pc doesn’t detect my controller being an elite series 2.
no xbox is locked to 250hz iirc which is plenty fast enough for a 144hz monitor they only would be lagging on 360hz monitors which no normal gamer owns waste of time unless you play competitive and tourneys my xbox elite 2 is 1ms latency on pc so idk what you would be gaining by burning your rollers chips my msi monitor is also 1ms so 1ms monitor 1ms roller at 250hz my monitors only 144hz what would you possibly gain unless your running a 360hz monitor
There is a lot of information on the GitHub site, Feedback issues and troubleshooting every controller/system is different. Give it a look and you should be able to resolve your problem :)
i get an error. it says “error trying to test loading of filter service: 577 windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file tat is signed incorrectly or damaged or that might be malicious software from an unknown source” etc. and my controller will no longer turn on i tried deleting the file and doing it over and it still will not turn on nor over clock the controller
@@Aronn1e Not sure about standard Xbox controllers definitely does work for elite series 2 controllers 😁 Glad you got your controller to turn back on legend!
@@kylewberry6373 Unlink driver from mouse/controller through SETUP.EXE (Filter = Unchecked) If you have delete a driver but not unlink it from mouse then the mouse will stop working. To make mouse working you can just delete device, corresponding to mouse in Device Manager, then scan for new devices. Or use SETUP.EXE -> [All] or [with Problem] or [with HIDUSBF] Devices -> [Filter On Device] is Unchecked -> [Restart] If you deleted the file without unchecking filter on device this is why the controller has stopped working find it in your settings and delete the controller and re add and should be fine. Also !! Warning - overclocking may not work for Low Speed USB devices which controlled by non Microsoft USB stack, like OEM USB 3.x drivers at Windows 7 or with the newest Microsoft drivers. You need to make sure you have disabled secure boot also 😁 !!! Warning 2 - you SHALL disable Secure Boot or modify the Registry accordingly to enable loading of Microsoft unsigned drivers to load HIDUSBF driver successfully under Windows 10 x64 version 1607 (Anniversary Update) or newer versions. Hopefully all works out for you mate 😁 let me know how you go 💪
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
@@hussein8484 Each bios is different you’ll have to google it for your motherboard. I also found on my new system I had to set the OS to “other” also hope this helps mate :)
@@hussein8484 I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
@@SK8TRBUOY it def worked and I can’t do all these steps now.. but even after testing everything and processing it through the tests say my controller input lag didn’t change at all
You kids so lost just copy what everyone else says 😂 I have tested several Xbox pro controllers and all can be overclocked. Only stock Xbox Microsoft licensed controllers can’t be overclocked… my victrix gambit went from 3.89ms average to 0.91 after overclock lmao you just slow
a xbox controller is locked at 250hz iirc it might say the process was complete but it did nothing, IT only works on playstation controllers (edit) to make it make sense a controller running 250hz would only lag if your monitor is 360hz which 98% of you do not own this video is pretty useless to all players as a xbox and playstation controller come at 250hz only playstation rollers can go to 1000hz which is useless unless your running a 360hz monitor your 4k is 60 hz and a 1440p is usually 144hz your controller is 250hz
@@chrisbandalo9678 lmaooo no you didnt!!!!!!!!!!!...... I've had mine overclocked since the last 3-4 months of Verdansk and I'm still here... never have been shadow banned ... This LITERALLY just reduces the reaction time from your controller to your PC ... has nothing to do with anything!.. It can't be detected by Ricochet JUST like a CRONUS ZEN (actually cheating, and this is not cheating ONE BIT!) can't be detected by the Ricochet Anti-Cheat even though i wish it could be just to put that into more context for you man,this shouldn't get anyone shadow banned/banned at all bc it's just making your controller do what it should out of the box to be honest with yah!! ...You got shadow banned for something else my friend... watch who yah play with!!!
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
definitely doesn’t download xinput mapper see what ur controllers latency’s are guarantee it’s at 8.7 ms the ui that’s in the controller won’t let you overclock it look at it your self
@@hunterberlin1035 I’m not sure about the mapper/app you’re using. The controller it self from standard to overclocked “FEELS” more direct. I tested it multiple times overclocked to not overclocked. And you can tell the difference. Have a wonderful day legend! :)
@@SK8TRBUOY i apologize if i was being negative in any way you can download xinput test then you can test the latency i have a elite controller and i unfortunately couldn’t get it past stock maybe it stables out the numbers so it might feel smoother i just never could get it to 1 ms
Just restart the program and go through the steps, If you continue to have problems check out the site where you download for more troubleshooting as I never had any problems 😁 Merry Christmas legend!
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other Enter the bios Make sure you are in advanced mode go into boot / secure boot Change the option were is says OS type to other from UEFI. This fixed windows blocking the program for me. Hope this fixes it for you :) (Basically this blocks the program from running and changing this should fix it conflicting)
You can indeed overclock your controller. It does indeed put lower latency for your Xbox controller. Your choice if you wish to believe it doesn’t. Hope you have a fantastic day 😁
Definitely works you slow bro. Only stock Microsoft controllers can’t be OC. Victrix gambit is OC and I get 0.93 ms tested with xinput tester but whatever bud 🤦♂️🤣
@@mechlovin5608 Can you read i said xbox controllers not third party controllers... Also that controller you bought looks terrible and uncomfortable reminds me of those cheap mad cats controllers 🤣
Don’t speak on things if you don’t know lol. Yes, they actually can you just aren’t very bright 🤦♂️ I’ve overclocked several Xbox controller my victrix gambit gets 0.91 ms latency with overclock. Without overclock 3.89 ms. Tested with xinput 😂 it’s a fact bro they’re recording latency fool so yes it definitely works
@@mechlovin5608 Xbox controller are hardware lock on how much you can overclock it, the victrix gambit is the only xbox controller that can but not as much as playstation controllers 🤦
Xbox controllers are shit it can't do 1000hz like PlayStation controllers i have both Xbox and PlayStation controller. Ive tested the polling rate on xinput app PlayStation controller doing 1ms and lower but Xbox controller only doing 5ms
This will improve NOTHING (for xbox controllers). They're hardware limited to register 125 inputs per second, so no software overclock will turn over this problem. This method only works and worth with PS4/PS5 controllers
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
can you do a tutorial on how to get to the "OS type cus iv looked all over yt and cant find it and i went in bios and still cant find it idk where it is and yes im in advanced bios under boot any tips?
😊
speak english please
@@ducky5425That’s literally how you do it 😂
Don’t worry i didn’t have a clue either till I did some research.
Google can be your best friend.
@@4kursesame problem do you have any idea how to fix it now?
it worked as far as the Driver setup is concerned. closed and reopened to 1000 and 1. No error or anything. But i ran a github gamepadla polling test and still getting default 125hz and 8-9ms latency
for everyone getting the error on filtering:
"!!! Warning 2 - you SHALL disable Secure Boot or modify the Registry accordingly to enable loading of Microsoft unsigned drivers to load HIDUSBF driver successfully under Windows 10 x64 version 1607 (Anniversary Update) or newer versions."
Need to tinker with BIOS which is what most tutorials are saying for disabling Secure Boot.
I had no problems at all when I did the overclocking for my controller 😁
Thanks for letting everyone know mate 💪
Please help me I have this issue it’s driving me mad
Thanks!!! A help for all receive the 577 error msg:
1. Click restart computer when holding down “shift”
2. You’ll get a menu pop up go > press Troubleshooting > Advanced options > Startup Settings and click the Restart button
3. When pc restarts you'll see a list of options. Press F7 on your keyboard to select "Disable driver signature enforcement"
4. Pc will restart and after all these steps it will work!
I works for the 1ms on the controller but now i can‘t start most games because anti-cheat Software won‘t work if you have driver signature enforcement disabled
When I restart after the steps my controller goes back to normal
Thanks def got mines did
It didn’t work. My elite series 2 won’t connect and I think it’s broken
Tried to restart and said device wan sent connecting
very helpful! mine was 10ms before!!!
i love the step by step video mate hopefully you do more like this in the near future for liking modding games etc.
Thanks mate :) had a lot of people ask me about overclocking the controller 😁
So what happens when the controller section highlights red with now 1 beside the 1000
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
@@SK8TRBUOYhow do you go to bios
Thanks a million for this i play apex and my lb and rb burtton is used for ult and tactical. I have had so many times where the roller was outright unresponsive and processed my commands too damn late.
BEST OVERCLOCK VID!!!!
xbox controllers can’t be overclocked the polling rate is locked. the elite gets about 8ms before and after the overclocking though it is more consistent. PS controllers can be overclocked to below 1ms.
I’ve ran and tested it does work :)
Your choice if you want to do it or not 😁
@@SK8TRBUOY i’ve done it what have you tested it with? XINPUT shows no difference besides consistency for xbox controllers.
It doesn’t there locked to 125hz.
There’s been multiple
Test
@@SK8TRBUOY it does not work mate it locked, might else well remove this video
Ive overclocked my elite 2 and it was 7.6 Ms consistently. However, after a firmware update, and a new overclock, it gets 4.3ms to 8.3ms.
easiest tut ive seen thank you
No worry’s legend! Glad I could help 😁
@@SK8TRBUOY just having issues with the right stick being robotic on vanguard and it's smooth on every other game
@@ShaggyRaggyDo Not sure mate, I was playing Vanguard the other day and it was fine for me 🤙
@@SK8TRBUOY strange it so weird
Everything works apart from when i reconnect the cable back into my controller. It is a red blank box in child name, what do i do to make it green?
You have to change the Bios setting I did another comment explaining how.
@@SK8TRBUOY do you mind linking me that video, thanks mate
@@thomasebbs8506 It’s in the comments mate have a look 👀
it doesnt say 1 for the interval can you tell me what i did wrong?
when i install service nothing comes up.. ONLY for me i guess..
this is probably a dumb
question but do i have to have the software open to get the 1ms or can i exit out of it ?
Dumb question but just for full clarity once you have overclocked the xbox elite controller does it need to remain plugged into the PC or can you play wirelessly with the same input time?
Needs to be plugged into the PC legend! 😁
That’s actually a good question, don’t feel stupid for that.
So you can't do this and then play on a console and it work then right? The overclock is not actually installed into the controller, it's on the computer right?
When i click apply filter my controller becomes unresponsive
Im still getting input lag on my series 2 controller. My regular dualshock 4 feels so responsive but I want to play with my paddles.
i know this is late but you can't overclock your xbox controller
so if i have my xbox controller. it wont let me overclock it?
@@Kaiyes-kg2ld
Is this achievable on the MacBook? Cheers
It says error trying to test loading
my controller doesnt even pop up for the devices
can you exit out? do you have to minimize it? do you have to open the software everytime you start up?
Once you have done it you don’t need to have it open. If you controller ever feels laggy again just check it quickly 😁
When you do this, does it work for Xbox as well or no
No its for pc. You're overclocking the USB port on the PC.
Hey bro how do I undo this entire process it caused my games to crash plz
I tried this but now it's not even detecting my controller and mouse. I cant even do anything with my mouse now
I still feel it has input lag with my Elite 2
I feel less input latency on my Xbox Series X than my PC. ( PC w/ Cable - XSX w/ Bluetooth)
I changed my pc 3 months ago with a better motherboard than what I had and it still feels as slow.
So I think the DLI Bluetooth Technology on the Xbox Series X is still faster than the regular plugged cable on Pc.
Xbox Series/One consoles do not have Bluetooth btw.
@@BlipBlopFlipFlop yea your right, I thought so because the controllers on PC connect to Bluetooth …
@@BlipBlopFlipFlop incorrect
@@BlipBlopFlipFlopthey do it’s just for controllers
Why not plug in the elite to PC with cable?
Does it for the Xbox controllers
whenever I filter on device. It has an error try to test loading of filter service.
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
Is this only for PC's not consoles
Mine turns red after following all the steps, any ideas?
Everything is correct besides binterval is blank?? Is this ok?
I get an error. It’s pretty long but it says “error trying to test loading of filter service: 577 windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file tat is signed incorrectly or damaged or that might be malicious software from an unknown source” etc. what should I do?
What I would do is delete the whole file you installed and redo the process and make sure it has installed onto your PC correctly & see how you go from there
For the 577 error you need to make sure the secure boot option is disabled for your PC
The first and only thing that you really need to do is to disable Secure Boot (or make some Registry setting equals to disabling Secure Boot). This is what readme recommends.
This does only work for Pc and not for console right?.
Even if I wire it to my console ?
Correct. Technically you're overclocking the Port on the PC not the controller specifically. Will not work on console.
Could someone please tell me if it's possible to OC on PC then switch to console or does it only work on pc???
It’s only changing the Input latency of the USB won’t effect console you are already low latency that way.
I tried overclocking my Xbox controller with the hidusbf and works but when i check my controller polling rate with X-input Test, it is still at 125hz(7-8ms) not actually 1000hz(0-1ms).
Is there a way to change or fix this?
Folllowing - have the same issue with my Scuff Prestige
got mine from 3-6 to 2-4 but i can use filter
@@abasnowxpoz5793 what controller do u have
I got it to 2-3 instead of 3-6
@@abasnowxpoz5793 ps4?
thanks dude
No worry’s legend! 😁
mine doesnt say extract all im on windows 10
Anyone experiencing 570 ERROR or the device is going RED,
Do these steps to fix it.
Click restart computer when holding down “shift” and “down arrow” You NEED to disable something for this to work,
You’ll get a menu pop up go
Troubleshooting
Advanced
Startup and click restart
You want to disable number 7 after disabling this it should work.
Let me know how you go 😁
This worked great for me 👌
wait a min when i go to play apex its saying the anti cheat cannot run if the driver has been disabled
I’ve tried this and tested it with the elite v2 but I doesn’t actually go to 1ms I used the xinput tester and it says it’s still 7ms could u test ur controller on the xinput tester to show that it’s actually 1ms?
100% the difference of gameplay/feel of lag is less. The controller feels more direct if done correctly 😁
Nope the only controllers that truly go to 1 ms are the ps5 controllers. The A fusion pro is the only xbox controller that can hit 4ms. All others are 7+ms
@Precise. You can believe what you want either use it or don’t :)
It definitely makes a difference in FPS games 👌
Nah all xbox controllers are hard capped at 5-5.5ms lmao. Dual shock and some other custom controllers can get to about 2.5ms.
@Precise. Exactly 😂
It says downloads arent supported on this device
Anyone else having an issue where they can’t program your buttons on your elite controller after your installed the service. My pc doesn’t detect my controller being an elite series 2.
Are you able to open up the Xbox accessories app. That is where you are able to change your button layouts for the elite :)
Ty bro. This tutorial was simple. I can now play mw2 with no delay.
Mine still has 4 second
Hey man so when i do it the blnterval just goes blank from 4. Is there anyway if you see this to help me out.
Same for me. He had something where you gotta change a setting in your bios but mine was already set to it. Still shows blank
My controller can’t connect to my pc anymore
Can you overclock your xbox elite series 2 controller?
no xbox is locked to 250hz iirc which is plenty fast enough for a 144hz monitor they only would be lagging on 360hz monitors which no normal gamer owns waste of time unless you play competitive and tourneys my xbox elite 2 is 1ms latency on pc so idk what you would be gaining by burning your rollers chips my msi monitor is also 1ms so 1ms monitor 1ms roller at 250hz my monitors only 144hz what would you possibly gain unless your running a 360hz monitor
It’s not working for me at all
I got my astro c40 and I don't think this is working . It might be that astro already have low input delay and I just need to get gud 👍
i cant get it to 1 and when i turn filter on i get red box '
Can I plug my controller into my Xbox after doing this and it will still have less delay?
no lol
min turns red and it does not work
Do I need to leave the program open while I use the control? If not, can I delete all these files?
No. And no
I got an Astro c40 and it’s says yes 1000 and 1-16 is it bad or good ?
There is a lot of information on the GitHub site, Feedback issues and troubleshooting every controller/system is different.
Give it a look and you should be able to resolve your problem :)
i get an error. it says “error trying to test loading of filter service: 577 windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file tat is signed incorrectly or damaged or that might be malicious software from an unknown source” etc. and my controller will no longer turn on i tried deleting the file and doing it over and it still will not turn on nor over clock the controller
ok actually i fixed my controller it turns on now but everytime i try to overclock it doesnt work im guessing it doesnt work for xbox controllers
@@Aronn1e Not sure about standard Xbox controllers definitely does work for elite series 2 controllers 😁
Glad you got your controller to turn back on legend!
I just got a ps5 controller and it won’t turn on once I did this
@@kylewberry6373 Unlink driver from mouse/controller through SETUP.EXE (Filter = Unchecked) If you have delete a driver but not unlink it from mouse then the mouse will stop working. To make mouse working you can just delete device, corresponding to mouse in Device Manager, then scan for new devices. Or use SETUP.EXE -> [All] or [with Problem] or [with HIDUSBF] Devices -> [Filter On Device] is Unchecked -> [Restart]
If you deleted the file without unchecking filter on device this is why the controller has stopped working find it in your settings and delete the controller and re add and should be fine.
Also !! Warning - overclocking may not work for Low Speed USB devices which controlled by non Microsoft USB stack, like OEM USB 3.x drivers at Windows 7 or with the newest Microsoft drivers.
You need to make sure you have disabled secure boot also 😁
!!! Warning 2 - you SHALL disable Secure Boot or modify the Registry accordingly to enable loading of Microsoft unsigned drivers to load HIDUSBF driver successfully under Windows 10 x64 version 1607 (Anniversary Update) or newer versions.
Hopefully all works out for you mate 😁 let me know how you go 💪
That file might be corrupted
thank you
Windows not letting me do it
it turns the xbox controller (device name) red. Is that ok?
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
when i plugged my controller in it was at interval "4" not "5".... Is that a problem or normal..?
Hi mine was like this but I didn’t go ahead with it. Did it work for you?
now the xbox controller is like a red bar and there is no interval number. what do i do?
I’m mentioned this in other comments.
You have to disable secure boot in the bios settings this might be your issue :)
@@SK8TRBUOY how do i do that i just got my pc like last week
@@hussein8484 Each bios is different you’ll have to google it for your motherboard.
I also found on my new system I had to set the OS to “other” also hope this helps mate :)
@@hussein8484 I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
@@SK8TRBUOY thank you very much it actually worked
I can't get mine to work with filter on device
You’ll have to disable secure boot from your bios.
This is what I had to do on my new computer.
I’ve explained in comments under how to do this.
Not working still 3.5ms
i go to do this and i get a long error message as soon as i click filter.... regardless what i do..
Did you make sure to disable secure boot? Some people were having the same problems 🤙
@@SK8TRBUOY can i ? while im actually running windows 11...??
@@RealCazTv Yes you can 😁,
Google helps out 💪
@@SK8TRBUOY it def worked and I can’t do all these steps now.. but even after testing everything and processing it through the tests say my controller input lag didn’t change at all
@@SK8TRBUOY what exactly does disable boot mean? im abit computer illiterate and struggling to over clock my elite 2 pad
it doesn work no more on mandos
well thanks now my xbox controller doesnt even turn on
I see but in my controller i see 4 no 1 how to fix to see 1 on the list!
is this work with windows 11?
Check on the site if it’s available for windows 11 :)
@@SK8TRBUOY I tried but just blocked my controller lol
Dosnt matter xbox controllers are capped at 125 hz pollingrate
You kids so lost just copy what everyone else says 😂 I have tested several Xbox pro controllers and all can be overclocked. Only stock Xbox Microsoft licensed controllers can’t be overclocked… my victrix gambit went from 3.89ms average to 0.91 after overclock lmao you just slow
a xbox controller is locked at 250hz iirc it might say the process was complete but it did nothing, IT only works on playstation controllers (edit) to make it make sense a controller running 250hz would only lag if your monitor is 360hz which 98% of you do not own this video is pretty useless to all players as a xbox and playstation controller come at 250hz only playstation rollers can go to 1000hz which is useless unless your running a 360hz monitor your 4k is 60 hz and a 1440p is usually 144hz your controller is 250hz
Can you use this with warzones richochet anti cheat? I know this isn't cheating, but don't want to be banned over something so silly
There should not be a problem, it is only reducing the lately on the usb device.
I got shadow banned for it... soo 🤷🏼♂️
@@chrisbandalo9678 lmaooo no you didnt!!!!!!!!!!!...... I've had mine overclocked since the last 3-4 months of Verdansk and I'm still here... never have been shadow banned ... This LITERALLY just reduces the reaction time from your controller to your PC ... has nothing to do with anything!.. It can't be detected by Ricochet JUST like a CRONUS ZEN (actually cheating, and this is not cheating ONE BIT!) can't be detected by the Ricochet Anti-Cheat even though i wish it could be just to put that into more context for you man,this shouldn't get anyone shadow banned/banned at all bc it's just making your controller do what it should out of the box to be honest with yah!! ...You got shadow banned for something else my friend... watch who yah play with!!!
People are saying it doesn’t work on Xbox..
This is to overclock your controller on PC NOT console.
@@SK8TRBUOY I know what I mean is some people say it doesn’t work on Xbox controller
@@assassin7250 I use the Xbox elite series 2 controller 😁
I don’t care what yall say it works for my Xbox elite series 2
is it noticably faster? run into any issues?
Once you overclock it to the PC will the controller work for console afterwards or is it just for pc
The program is to reduce the latency for the USB on the PC, It will have no effect on your console 😁
@@SK8TRBUOY fuck
when i replug my controller in it was red not green.. is this normal ?
ruclips.net/video/8_N5EHcsGgU/видео.html
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
quick question does this amp aim assist? i swear my shit is more powerful for some reaosn
Shouldn’t change aim assist at all but now it’s got no Latency it’ll feel much faster response 😁
lord of mice doesn’t work for xbox one controllers
It does indeed WORK for Xbox elite controllers 🔥
definitely doesn’t download xinput mapper see what ur controllers latency’s are guarantee it’s at 8.7 ms the ui that’s in the controller won’t let you overclock it look at it your self
unless you mod the controller you 100% cannot change the poll rate on a elite controller
@@hunterberlin1035 I’m not sure about the mapper/app you’re using.
The controller it self from standard to overclocked “FEELS” more direct.
I tested it multiple times overclocked to not overclocked.
And you can tell the difference.
Have a wonderful day legend! :)
@@SK8TRBUOY i apologize if i was being negative in any way you can download xinput test then you can test the latency i have a elite controller and i unfortunately couldn’t get it past stock maybe it stables out the numbers so it might feel smoother i just never could get it to 1 ms
Just get you ah ps4 controller some wingman xb and done 🤣
This does not work
On my rate it says 1000 but for blnterval it says 4
Just restart the program and go through the steps, If you continue to have problems check out the site where you download for more troubleshooting as I never had any problems 😁
Merry Christmas legend!
ruclips.net/video/8_N5EHcsGgU/видео.html
My blnterval is blank??
Got it 💪🏿💪🏿
it wont let me install service?
Check out the GitHub site when you download there is so many troubleshooting there legend!
For EVERYONE who is experiencing red/ not filtering on device I had this problem also and I had to go into the Bios and change the Windows profile to other
Enter the bios Make sure you are in advanced mode go into boot / secure boot
Change the option were is says OS type to other from UEFI.
This fixed windows blocking the program for me.
Hope this fixes it for you :)
(Basically this blocks the program from running and changing this should fix it conflicting)
test?
*EVERYONE YOU CANT OVERCLOCK A XBOX CONTROLLER IT IS LOCKED TO 100 HE IS LYING*
You can indeed overclock your controller.
It does indeed put lower latency for your Xbox controller.
Your choice if you wish to believe it doesn’t.
Hope you have a fantastic day 😁
This doesnt work on xbox controllers input delay will stay the same more research needed by you.
I’ve already done ✅
It does indeed work for Xbox elite controllers. It reduces the input delay.
Definitely works you slow bro. Only stock Microsoft controllers can’t be OC. Victrix gambit is OC and I get 0.93 ms tested with xinput tester but whatever bud 🤦♂️🤣
@@mechlovin5608 Can you read i said xbox controllers not third party controllers... Also that controller you bought looks terrible and uncomfortable reminds me of those cheap mad cats controllers 🤣
Ist working in xbox ine
so i did everything in this video and i keep getting 4 for the blnterval
just close the app and open it again. it worked for me. and when im using ds4 it says that my controllers input lag is below 0 now
ruclips.net/video/8_N5EHcsGgU/видео.html
xbox controllers can not be overclocked
OC only gives more consistent input, keeping it between 3ms-8ms. Still better than no OC.
Don’t speak on things if you don’t know lol. Yes, they actually can you just aren’t very bright 🤦♂️ I’ve overclocked several Xbox controller my victrix gambit gets 0.91 ms latency with overclock. Without overclock 3.89 ms. Tested with xinput 😂 it’s a fact bro they’re recording latency fool so yes it definitely works
@@mechlovin5608 Xbox controller are hardware lock on how much you can overclock it, the victrix gambit is the only xbox controller that can but not as much as playstation controllers 🤦
Xbox controllers cant be overclocked
Xbox controllers are shit it can't do 1000hz like PlayStation controllers i have both Xbox and PlayStation controller. Ive tested the polling rate on xinput app PlayStation controller doing 1ms and lower but Xbox controller only doing 5ms
Does this load on controller and I can delete the downloaded files?
Xbox controller can not overclocked lol
It can and definitely does work to reduce the latency/input delay.
at all
Too bad it's considered cheating.
Reducing the latency from the USB port from 5ms to 1ms is NOT cheating, It’s getting the best performance out of your controller 😁
@@SK8TRBUOY Then why is it banned in LAN tournaments?
This will improve NOTHING (for xbox controllers). They're hardware limited to register 125 inputs per second, so no software overclock will turn over this problem. This method only works and worth with PS4/PS5 controllers
For using a Xbox controller I can confirm it does help maybe not as fast as ps5 but it definitely decreased the input delay
@@JTCapalotno it's not helping at all, it's HARDWARE CAPPED to 125hz.
It doesnt let me click install service. Why?
when i press install service i don't get the window to press open
thank you