Drag Mini Bike Part 4 | 240cc Big Bore Install + Custom Gas tank!!
HTML-код
- Опубликовано: 9 фев 2025
- In today's video I install a 240cc big bore kit on my homemade Yamaha blaster 2 stroke drag minibike. I build a nice custom gas tank integrated in the frame. Stay tuned for it's first drag strip pass.
Check out my welders here: 800usaweld.com...
---Mig welder: 800usaweld.com...
--Tig welder: 800usaweld.com...
Gopowersports: www.gopowerspo...
Tell them Vasily sent you
PARTS USED:
HOT Mini bike forks: www.gopowerspo...
7/8 risers: www.gopowerspo...
Front wheel (non cutout): www.gopowerspo...
Seat: www.gopowerspo...
Front tire: www.gopowerspo...
6.5" wide rear rim: www.gopowerspo...
Brakes: www.gopowerspo...
5.5" wide Hoosier slick: www.summitraci...
Axle bearings kit: www.gopowerspo...
1" lock collars: www.gopowerspo...
BIG bore kit: www.vitosperfo...
Cut out Front rim: www.bmikarts.c...
-----------------------
Follow me on Instagram @vasilybuilds
/ vasilybuilds
New merchandise: teespring.com/...
For all inquires email me vasily1fab[at]gmail.com
🎵 Music used form epidemicsound.com
First track by T2NATE : • T2NATE Beats 20 (Non C...
•2nd song: Nomyn- lightness
•3rd song: What color is the sky - 91NOVA
•Outro: Aestral-Freedom
Great to see a young guy involved with his hands and imagination.
This guy, big bore kit! As if it wasn't badass enough that's why your one of my favorite builders!!!
Good call on the blue, looks great! I wasn't really feeling the UT orange either 😆😆 I can't wait to see that thing rip! It's already awesome and it's not even finished. Just protect your knee!!! Hate to see you get hurt again and that thing will be plenty fast enough to do it! Great work, as always, keep it up my Tennessee brother, lol
I really truly believe that the "Dance move" made all the difference in the outstanding paint job! Great job as always Mr. Vasily. Peace.
Yessss looks awesome bet it will go fast too. Can’t wait for the drag race
Don’t forget clear coat to protect the paint and tank. Awesome build. At your age tig welding man that’s amazing.
I wouldve done a raised "vasily builds" logo on the side of tank to makem pop. Just my take tho. Nice build bro. Keep up the great work.
Vasily,ur tig skillzzz are much improved brother,keep up the GR8 work!
You inspired me to take action man🙏🙌
Another great addition, keep it going young man!
👍😎🏁 only 1/2 way thru the vid, can't wait to hear it... ding ding ding. Varooom.
Just got my 70cc 40mm big bore kit in for my 1978 2stroke puch maxi moped today. Thing is so fun and sketchy at the same time and street legeal!
Sounds like fun!
By the way, I just finishedish my latest project. It's because of you and people like you making awsome videos like this that I felt inspired to do it at all. It's a beast but seems bleak compared to what you build. Keep putting this stuff out there. I get so many great ideas. For instance I've been struggling with a fuel tank problem. You just thought me what I should do. Thank you so much! Thank you!
Awesome. Thank you
Wow, what a clean build!
Awesome build, you’re very talented! I love the gas tank idea.
Dayum... that frame looks slick & amazing. I get back to you soon brother. We dealing with a sick family member right now. Just moved my mother inlaw in with us. Stage 4 throat cancer... smh.
Thanks. hope he/she gets better
With Patience & Lots of practice Comes nothing but the Finest Technique my dude only one way 2 getting that is to get after it just like u are looks Sick bro....🤘
I used to shave the piston to advance the inlet timing and also take out the head gasket and use valve grinding paste to seat the head to the barrell. Also retune the airbox inlet.
Sick build brotha. Another great video. Love the channel. Congtrats and god bless✌
Bad ass mini bike man! I wouldn't change a thing. Dont sell yourself short with the tank welds. SS takes years of practice. I think you've done really well.
Awesome! Great work young man!
Man this build is so cool buddy I would love to ride this bad boy one day what a awesome mini bike can’t wait to see what kind of times this lil rocket can put down
Looks great man! Keep up the content I enjoy your channel.
pretty cool! welding is getting better!
I really like the blue. Looking forward to seeing how fast it is.
Dam !!! Son!!! Oh my Lord I love that mini bike 😍 you did amazing job
Wow, very nice work. I would love to see you add a rear suspension to this in the future.
Love the colour and liked the little dance lol your the best bro keep it up.
Awesome build. Nice work on the tank!!
Sweet build bud. Just a tip, next time put the piston in the cylinder first then put the wrist pin in when the cylinder is being put on.
Its turning out awesome. Love the color
One tip for painting always wipe everything down with acetone or wax and grease remover before spraying
Sick build man. One of My favorite ones You've done yet..
Your channel is growing so fast and you deserve even more subscribers than you already have. Keep up the amazing work 👌
So true been a fan since before the motorized bike build 🤙👍
@@ryt9845 awesome. Thanks y'all!
congratulations on the project, following from Brazil 🇧🇷
Great job mate, love that fuel tank very cool, and no leaks 🤟
Such a fun little project 😊
Keep up the great builds 👍👍
This one just gave me the idea to take my old 80s 125 Yamaha 2 stroke and make a drag trike.
looking good with blue color
Looks cool. Would be cool to see some racing
Nice meeting you at the mall.
You inspire me, and I'm old 🧓
That thing is crazy! I'd love to see it on a track.
If the transfer ports (Im sure they are) are different between the two cylinders, you need to port match the new cylinder and cases. Dont forget to trim the base gasket! Requires splitting the cases, so plan on it and a crank rebuild at the same time. Nice tank. Need a bigger rear wheel/tire.
Great idea. If I split it I'll put a stroker crank in it
Love it great job. Also love the maxima castor 927 love the stuff!!!!
Vermilion orange from the British Leyland range is a slap in the face orange. My CBR frames that colour and in the sun its perfect.
Really like the blue. I want to take this damn thing for a spin
Really like your channel, I've been watching since the beginning, I like the tank idea but I think you should hand brush black around the edges, or tape it off good and spray it black around where the stainless turns to blue. It'd look sharp matching the front end.
Age range of Moto Migs
Skills like Red Beards Garage
Video quality of Grind Hard Plumbings co
Lol thank you! I'd say I'm 30% there
Too bad no one else has Grind Hard Plumbing level builds
Enthusiasm like cars and cameras
Whiteboy Steve give this boy some time and I bet he will
Sick build man!!
He deserves more subs
Once again the build is awesome and your weilding is getting close to Master Level ....
{as good if not better than GHPC) God Bless.
Nah he ain't better he's hella good tho
great work keep it up love the vids bro
Good job dude it looks great I really like the look of the blue and stainless. Things to not with stainless less is always more lower heat better colors u get and it will warp like crazy but u did a great job keep it up u will get the hang of it quick
Liked before watching i no it's going to be good
Great work man!
Great job man
Love this build
Nice bike malaka!!
that was a friggin dope video ngl
thats sick bro almost looks like a rcf frame
Can't wait to c what's next. How many gears does the Drag Mini Bike have?
6 speed 👀🤟🏼
It would be cool to see a Jr dragster slick on the back of that thing
Slip a couple of your stickers on it,and Clear-Coat.It'll shine for years,like you.
One thing you should do is a drift trike or a atc with rear wheel steering, pitting rear wheel steering on a atc is safe!!
That's a good job ✌
Nice work Vasily 👍 It’s coming along great!
I’m glad that needle adjustment worked out for your carb 🙂
Ps Sorry about your camera 😕 Those things are just a few of the hidden cost of making RUclips videos, believe me I know. What was your camera, maybe a Panasonic G 85 or G5?
I’m running the G85
Nice to see you here mike, loving your 4x4 articulating dump truck
Thanks Mike! I run the g7
Nice job 👍
Do a motorised drift trike build 👌🏽👍🏽
if you throw some clear coat on the welds around the tank it wont rust any more :)
What rear rim you have? May I have specs on rim and slicks you have? I want the same look on my build , awesome bike my boy !
I really really hope you weighed the original piston, wrist pin, piston rings, circlips, and compared it to the weight of all the new stuff from the big bore kit. The piston, rings, wrist pin, and circlips. Why to rebalance the engine well the new parts if not you will be buying a new crank most likely. Always always check the weight when going to a bigger piston. Usually the larger piston will weigh more. Witch makes the job easy for you. With taking a dremel and removing material from unnecessary spots on the piston. If the engine is already together I would still recommend pulling the head and jug/cylinder and checking your weights.
Nice welding
What's your process for breaking in those two stroke rings on that Big Bore piston
Do you have merch?
You should install front brake for burnouts.
Needs more pop. Polish the stainless?
I think you're doing a great job is it but budget project imagine if you had a street project it's a lot more expensive I'm at that well thinking God bless keep up the good work brother Godspeed
please do a top speed run when its complete!
Needs front brakes for burnouts. Ya know gotta get that traction on the strip.
If you really want to exploit the potential of a 2 stroke like this, you should start taking some measurements. Like the ports degrees, the squish area, the compression ratio etc. Just putting the new cylinder as a "plug&play" part is nice but it still has some room for improvements. Keep on with the good work!
I love the blue please do a drive through reaction video
Good job, what was your total weight on just the frame. Looks strong enough to add whatever power you can throw at it .
Lastly “ did you start with a frame or a jig
My fav. Blue !!!👍👍👍💕
yooo! love the videos bro, we actually met each other at ur church. it was nice to meet u
Good job
Nikasil is a coating not a liner. The new liner may not be that thick you may be looking at a flange at the top.
Thanks for the video
I’m surprised you didn’t build a traditional rear axle pocket so that tensioning would be easy and all the rear hub stuff will be standard motorcycle stuff
that thing is awesome how fast is it
cool video bro
Wow, you put a lot of work into that gas tank!
IMO, the side of the tank is just begging for a logo sticker.
Ive been following u for a while. I'm from Georgia. Want to see how can I get in touch with u for doing a build for me.
Looks good.
Personally I would have went with a much skinnier tire up front.
Por15 is the best stuff I've used
Dude shes a beauty 🤙🤙
Oh...
This bike is sweet bro! When everything is done, could you throw in an overall cost for this build? Alas, I love it! Great videos bro!
This is cool
How fast is it
Yoo something is up for your notifications!
It would be cool to put a tachymeter on it to see at how high the RPM gets. In addition taking it to a drag Line as you said or putting a speedometer allow to mesure the performance of this fu***** heaven build
That piston head looked toasted. I bet a 50% increase in power lol